2 layers256.5 × 172.9 mm
2 layers130.2 × 52.1 mm
ZeniteTemplate2022
ZeniteSolar/ZeniteTemplate2022Template for almost all PCBs
- Size
- 130.2 × 52.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 48
- Pads
- 162
- Tracks, vias
- 301, 18
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 16 Feb 2022
- Updated
- 16 Feb 2022
Overview
ZeniteTemplate2022 is an open-source printed circuit board by ZeniteSolar, from the ZeniteSolar/ZeniteTemplate2022 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 130.2 × 52.1 mm with 51 parts on 48 nets, routed with 301 tracks and 18 vias.
It is built around the ATMEGA328P-PU, MCP2551-I/SN and LM7805, with the LL4148, RJ45 and PESD1CAN among its other parts. Its parts include 15 capacitors, 8 resistors, 5 diodes, 4 ICs and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6
ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
MCP2551-I/SN
SOIC-8-40℃~+85℃ 1Mbps 365uA 4.5V~5.5V 75mA CAN Transceiver SOIC-8 CAN Transceivers ROHSMicrochip TechnologyCAN Transceivers
LM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching Diodes
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
PESD1CAN
SOT-23-65℃~+150℃ 11pF 1nA 2 200W@8/20us 24V 30.3V 3A@8/20us 70V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
README
README.mdMSC19
Voltage or Current Sensor Module for CANBUS with ATmega328p
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C201, C202, C205, C401, C402, C405, C406, C502, C503 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R402, R403, R404, R405 |
| 4 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C203, C204, C403, C404 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H101, H102, H103, H104 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R203, R401 |
| 2 | 16MHz | Crystal:Crystal_HC49-U_Vertical | Y201, Y401 |
| 2 | 1uF | Capacitor_Tantalum_SMD:CP_EIA-6032-20_AVX-F_Pad2.25x2.35mm_HandSolder | C501, C504 |
| 2 | LED_RED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D402, D403 |
| 2 | LL4148 | Diode_SMD:D_MiniMELF_Handsoldering | D401, D501 |
| 2 | RJ45 | KicadZeniteSolarLibrary18:RJ45_YH59_01 | J601, J602 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R201 |
| 1 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R202 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F501 |
| 1 | ATMEGA328P-PU | Package_DIP:DIP-28_W7.62mm | U401 |
| 1 | CAN_H | TestPoint:TestPoint_Pad_2.0x2.0mm | TP207 |
| 1 | CAN_L | TestPoint:TestPoint_Pad_2.0x2.0mm | TP208 |
| 1 | INT | TestPoint:TestPoint_Pad_2.0x2.0mm | TP209 |
| 1 | LM7805 | KicadZeniteSolarLibrary18:TO-220-3_Horizontal_TabDown_SMD | U501 |
| 1 | MCP2515-xSO | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U202 |
| 1 | MCP2551-I/SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U201 |
| 1 | RXCAN | TestPoint:TestPoint_Pad_2.0x2.0mm | TP204 |
| 1 | SC | TestPoint:TestPoint_Pad_2.0x2.0mm | TP205 |
| 1 | SCK | TestPoint:TestPoint_Pad_2.0x2.0mm | TP206 |
| 1 | SI | TestPoint:TestPoint_Pad_2.0x2.0mm | TP201 |
| 1 | SO | TestPoint:TestPoint_Pad_2.0x2.0mm | TP202 |
| 1 | TXCAN | TestPoint:TestPoint_Pad_2.0x2.0mm | TP203 |
| 1 | USART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J401 |
| 1 | pesd1can | Package_TO_SOT_SMD:SOT-23_Handsoldering | D201 |
Similar boards
- 2 layers239.3 × 121.3 mm
- 2 layers
- 2 layers122.6 × 52.7 mm
- 2 layers248 × 174.4 mm
- 2 layers228 × 149.8 mm
MIC19
ZeniteSolar/MIC19
Módulo de Interface do Controle da embarcação solar Guarapuvu II (Zênite Solar)
300 partsGPL-3.0 - 2 layers232.1 × 131.2 mm
- 2 layers63 × 108 mm
MSC25
ZeniteSolar/MSC25
Este projeto consiste em uma placa de circuito impresso (PCB) com firmware embarcado, projetada para realizar a leitura de alta precisão de um sensor de corrente de efeito Hall e transmitir os dados através do…
61 parts
Questions
How big is the ZeniteTemplate2022 PCB?
It measures 130.2 × 52.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ZeniteTemplate2022 use?
51 parts, built around the ATMEGA328P-PU, MCP2551-I/SN, LM7805 and LL4148. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ZeniteTemplate2022 KiCad files?
From the ZeniteSolar/ZeniteTemplate2022 repository on GitHub, at the commit this page was made from: the board is ZeniteTemplate2022.kicad_pcb and its schematic ZeniteTemplate2022.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ZeniteTemplate2022 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).