

Epd c6 slimbadge
[WIP]3.98英寸 4色墨水屏。
- Size
- 99 × 62 mm
- Copper layers
- 4
- Thickness
- 0.8 mm
- Parts
- 93
- Nets
- 55
- Pads
- 360
- Tracks, vias
- 527, 198
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 9 Oct 2026
- Updated
- 22 Oct 2026
Overview
Epd c6 slimbadge is an open-source printed circuit board by ZGQ-inc, from the ZGQ-inc/3.98-epd repository on GitHub, published under the MIT licence. It is a 4-layer board of 99 × 62 mm with 93 parts on 55 nets, routed with 527 tracks and 198 vias.
It is built around the ESP32-C6-MINI-1, ME6211C33M5G-N and OPT3001, with the PCF8563T/5, QMI8658C and SY6970QCC among its other parts. Its parts include 35 capacitors, 20 resistors, 10 ICs, 7 diodes and 2 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
12ESP32-C6-MINI-1
SMD,13.2x16.6mmSMD,13.2x16.6mm New Arrivals ROHSEspressif SystemsUncategorisedME6211C33M5G-N
SOT-23-5-40℃~+150℃ 1 120mV@(100mA) 3.3V 500mA 50uVrms 60uA 6V 70dB@(1kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsOPT3001
DFN-6(2x2)DFN-6(2x2) New Arrivals ROHSEverlight ElectronicsUncategorisedPCF8563T/5
SO-8-40℃~+85℃ 0.25uA 1V~5.5V Battery low-voltage detection、Programmable clock output、Alarm function、Countdown timer I2C Yes SO-8 Real Time Clocks ROHSNXP SemiconductorsReal Time ClocksQMI8658C
LGA-14-40℃~+85℃ 1.5KB 1.71V~3.6V 16bit IMU (accelerometer + gyroscope) SPI、I2C、I3C Synchronization and timestamp X,Y,Z X,Y,Z ±16g ±2048dps LGA-14 Accelerometers ROHSQSTAccelerometersSY6970QCC
QFN4x4-24-40℃~+85℃ 3.9V~14V 3V 4.208V QFN4x4-24 Battery Management ROHSSilergy CorpBattery ManagementUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)MBR0540
SOD-123-55℃~+150℃ 1 Independent 20uA@40V 40V 5.5A 500mA 510mV@500mA SOD-123 Schottky Diodes ROHSonsemiSchottky DiodesAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsB3U-3000P
SMD,3x2.5mm-25℃~+70℃ 1.2mm 1.59N 12V 2.5mm 3mm 50mA Black IP40 Rectangular Button SMD(SMT) Tab SPST Surface Mount, Right Angle Without Bracket SMD,3x2.5mm Tactile Switches ROHSOmronTactile SwitchesFPC 0.5MM 4P 翻盖式 H2.0
SMD,P=0.5mm,卧贴0.5mm 2mm 4P Bottom Contact Hinged Lid Surface Mount, Right Angle SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSSHENZHEN ATOM TECHFFC, FPC (Flat Flexible) Connector AssembliesSK-12D07-5
插件Plugin Slide Switches ROHSROCPU SwitchesSlide Switches
README
hardware/pcb_std/README.mdSlimBadge-C6 Standard 标准版 (全功能平衡)
1. 版本定位与成本
- 定位:全功能平衡版,支持 NFC 交互、RTC 极低功耗待机、IMU 计步/姿态唤醒、MicroSD/TF 卡扩展与电量精确监控。
- BOM 器件数:40 项 (主板) + 1 项 (FPC NFC 天线)。
- 单套预估成本:约 ¥84.19。
2. 关键硬件变更说明
- 移除 CH224K PD 诱骗芯片:
- 采用标准 5.1k CC 下拉,直接从 USB Type-C 端口安全取电 5V,彻底消除 9V 降压带来的发热与电容耐压隐患。
- 新增侧按微动轻触按键 (SW2):
- 采用标准超薄侧按轻触开关
SW_SPST_B3U-3000P(LCSC: C135850),放置于板边顶部 ($X=13.5, Y=1.7$)。 - 按键轴心沿 PCB 水平外沿突出 0.25mm,适配外壳侧壁开孔,实现真正的侧边按压(侧按)。
- 信号直连
GPIO9,支持一键刷机下载与用户自定义功能(切页/休眠/背光)。
- 采用标准超薄侧按轻触开关
- 新增 6 位镀金调试测试焊盘矩阵 (TP1 ~ TP6):
- 利用原 CH224K 区域布局 6 个 1.2mm 镀金测试点:
VBUS、3V3、BAT、BOOT及双GND,外围标注清晰丝印,便于出厂测试与探针测试。
- 利用原 CH224K 区域布局 6 个 1.2mm 镀金测试点:
- 板载 SPI Flash (U12) 3D 模型修复:
- 绑定物理 SOIC-8 3D 模型,3D 视图与渲染图均完整呈现元器件实体。
3. 生产文件
- PCB:
epd_c6_slimbadge.kicad_pcb - SCH:
epd_c6_slimbadge.kicad_sch - SMT BOM:
BOM_JLCSMT_SlimBadge_C6.csv - CPL:
CPL_JLCSMT_SlimBadge_C6.csv
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C15, C16, C22, C26, C28, C29, C30, C31, C32, C33, C34 |
| 11 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R9, R11, R14, R16, R17, R18, R19, R20, R21, R23 |
| 10 | 1uF_50V | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 5 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4, C19, C24, C25, C27 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R22, R24 |
| 3 | MBR0540 | Diode_SMD:D_SOD-123 | D1, D3, D4 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C20, C21 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C1, C23 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | GND | TestPoint:TestPoint_Pad_D1.2mm | TP2, TP4 |
| 1 | 0.1uF | C35 | |
| 1 | 1.0uH | Inductor_SMD:L_1210_3225Metric | L2 |
| 1 | 10uF_25V | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | 120R | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 1uF_25V | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 2.2R | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D1.2mm | TP3 |
| 1 | 4.7uF_50V | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 68uH | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | ACT_White | LED_SMD:LED_0603_1608Metric | LED4 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | B3U-3000P | Button_Switch_SMD:SW_SPST_B3U-3000P | SW2 |
| 1 | BAT | TestPoint:TestPoint_Pad_D1.2mm | TP5 |
| 1 | BAT+ | TestPoint:TestPoint_Pad_D2.0mm | PAD_BAT_P |
| 1 | BAT+_B | TestPoint:TestPoint_Pad_D2.0mm | PAD_BAT_P_B |
| 1 | BAT- | TestPoint:TestPoint_Pad_D2.0mm | PAD_BAT_N |
| 1 | BAT-_B | TestPoint:TestPoint_Pad_D2.0mm | PAD_BAT_N_B |
| 1 | BOOT | TestPoint:TestPoint_Pad_D1.2mm | TP6 |
| 1 | CHG_Red | LED_SMD:LED_0603_1608Metric | LED2 |
| 1 | DONE_Green | LED_SMD:LED_0603_1608Metric | LED3 |
| 1 | EPD_PortA_0.8mm | Adapter:0.8mm_24P | J_EPD_A |
| 1 | ESP32-C6-MINI-1 | ESP32-C6-MINI-1 | U1 |
| 1 | FLASH_4-128MB | U12 | |
| 1 | FPC_0.5mm_4P | J_NFC | |
| 1 | JST_1.25mm_2P | Connector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J2 |
| 1 | ME6211C33M5G | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | MicroSD_MidMount | Connector_Card:microSD_HC_Hirose_DM3D-SF | J_TF |
| 1 | OPT3001 | Package_SON:Texas_S-PDSO-N6 | U8 |
| 1 | PCF8563T | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U9 |
| 1 | QMI8658C | Package_LGA:LGA-14_2.5x3mm_P0.5mm | U6 |
| 1 | SHT40 | Package_DFN_QFN:Sensirion_DFN-4-1EP_1.5x1.5mm_P0.8mm_EP0.6x0.9mm | U7 |
| 1 | SK12D07 | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | SK6805-EC15 | LED_SMD:LED_SK6805_1515 | LED1 |
| 1 | ST25DV04K | Package_SO:UFDFPN-8_2x3mm_P0.5mm | U10 |
| 1 | SY6970 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U4 |
| 1 | Type-C_16P | Connector_USB:USB_C_Receptacle_MidMount | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | VBUS | TestPoint:TestPoint_Pad_D1.2mm | TP1 |
More from ZGQ-inc/3.98-epd
2- 2 layers20.4 × 20 mm

- 2 layers62 × 44 mm

Similar boards
- 4 layers100 × 100 mm

- 2 layers50 × 50 mm

- 2 layers17 × 45.3 mm

- 4 layers90 × 93 mm

- 2 layers74 × 54 mm

Plant esp32-onboard
thomaslr/plant-esp32
This directory contains the production files, Pick & Place centroid files (CPL), Bill of Materials (BOM), KiCad design source files, and 3D renders for the Monolithic Onboard SMD Edition of the Plant ESP32 watering…
46 parts - 4 layers138.1 × 104.6 mm

V7-kaleido
vroland/epdiy-hardware
Hardware design files for EPDiy: https://github.com/vroland/epdiy.
140 parts75CC-BY-SA-4.0 - 4 layers52 × 52 mm

Moto gps rev a1
mx3353672833-debug/moto-gps-waveshare
MOTO GPS · Waveshare ESP32-S3 1.75C 圆屏导航 + iPhone App | Author: Maler X | Noncommercial, attribution required | Experimental
112 parts529 - 2 layers

8-ball badge
tylercrumpton/magic-8-badge
An Open Source CircuitPython-compatible PCB badge that can (maybe) tell the future!
90 parts2
Questions
How big is the Epd c6 slimbadge PCB?
It measures 99 × 62 mm and has 4 copper layers, 0.8 mm thick.
What parts does the Epd c6 slimbadge use?
93 parts, built around the ESP32-C6-MINI-1, ME6211C33M5G-N, OPT3001 and PCF8563T/5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Epd c6 slimbadge KiCad files?
From the ZGQ-inc/3.98-epd repository on GitHub, at the commit this page was made from: the board is hardware/pcb_std/epd_c6_slimbadge.kicad_pcb and its schematic hardware/pcb_lite/epd_c6_slimbadge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Epd c6 slimbadge design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).