
OpenRPNCalc
apoluekt/OpenRPNCalc
Open-source and open-hardware scientific RPN calculator

JST PH2 power splitter (1-in/4-out) with LM66100 ideal-diode reverse-polarity & backflow protection.
JST PH2 BUS is an open-source printed circuit board by YamamotoWorksDev, from the YamamotoWorksDev/JST_PH2_BUS repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 29 × 40 mm with 9 parts on 4 nets, routed with 24 tracks and 7 vias.
It is built around the LM66100QDCKRQ1. Its parts include 5 connectors, 3 capacitors and 1 IC.
This module splits power from a 2-pin PH connector into four outputs.
It includes an ideal diode (LM66100) to provide reverse-polarity protection on the input connector and to block reverse current from the outputs back to the input.
The hardware design files in this repository are licensed under the CERN Open Hardware Licence Version 2 - Permissive (CERN-OHL-P-2.0).
Unless otherwise stated, the following are treated as hardware design files covered by CERN-OHL-P-2.0:
A copy of the license text is provided in the LICENSE file.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1, J2, J3, J4, J5 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | LM66100QDCKRQ1 | My_Parts:SC70-6_DCK_TEX | U1 |

apoluekt/OpenRPNCalc
Open-source and open-hardware scientific RPN calculator

engemil/engemil_pmw3901mb_hardware
PMW3901MB Optiocal Flow Sensor Module designed with KiCAD

ThatguyCplus/throttleECU
STM32F411CE Throttle ECU — PID position control with AS5048A encoder, H-bridge motor, safety module

shivamtiwari020505/Automotive-BLE-CAN-Module
KiCad hardware design for an automotive BLE-to-CAN module



FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
It measures 29 × 40 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the LM66100QDCKRQ1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the YamamotoWorksDev/JST_PH2_BUS repository on GitHub, at the commit this page was made from: the board is JST_PH2_BUS/JST_PH2_BUS.kicad_pcb and its schematic JST_PH2_BUS/JST_PH2_BUS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).