

SMIW projekt
Projekt 7 na SMIW
- Size
- 107.8 × 71.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 47
- Pads
- 186
- Tracks, vias
- 478, 60
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 28 May 2026
- Updated
- 7 Jul 2026
Overview
SMIW projekt is an open-source printed circuit board by WGRL, from the WGRL/SMIW-projekt repository on GitHub. It is a 2-layer board of 107.8 × 71.2 mm with 54 parts on 47 nets, routed with 478 tracks and 60 vias.
It is built around the LM2596S-5.0, MT3608 and MAX40200AUK, with the 100UF/16V, MMBT3904 and SS14 among its other parts. Its parts include 13 capacitors, 12 resistors, 8 ICs, 7 diodes and 4 connectors.
Main components
6LM2596S-5.0
TO-263-5-40℃~+125℃@(TJ) 1 150kHz 3A 4.5V~40V 5V 5mA Buck Buck Built-in Fixed No TO-263-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersMT3608
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA、1.6mA 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC ConvertersMAX40200AUK
SOT23-5Ultra-Tiny Micropower, 1A Ideal Diode with Ultra-Low Voltage DropMaxim Integrated (Analog Devices)Uncategorised100UF/16V
C1812C1812 SMT ROHSJLCPCB AssemblyUncategorisedMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdSchematy i płytki PCB obejmują 3 projekty:
-
Moduł m5 Stamp-S3, zasilanie 12V i step downy na 5V i 3V3, potrzymanie akumulatorowe i ładowarkę opartą na LM317 + sterowanie źródłem zasilania
-
Moduł czytnika kart micro sd (SPI) i pamięć FRAM
-
Moduł sterowania silnikiem 12V, złącze silnika i enkoder
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C6, C8, C9, C13 |
| 4 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R7, R8, R13 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R10, R12 |
| 3 | 10uH | Inductor_SMD:L_Bourns_SRR1260 | L1, L3, L4 |
| 3 | M1 | Diode_SMD:D_SMA | D4, D5, D6 |
| 2 | 15 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R9 |
| 2 | 1uF | Capacitor_SMD:CP_Elec_6.3x5.3 | C11, C12 |
| 2 | Conn_01x02 | Connector_PinSocket_1.00mm:PinSocket_1x02_P1.00mm_Vertical_SMD_Pin1Left | J3, J4 |
| 2 | LM317_SOT-223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4, U5 |
| 1 | 0 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 100uF/16V | Capacitor_SMD:CP_Elec_6.3x5.3 | C7 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_6.3x5.3 | C10 |
| 1 | 10uF/16V | Capacitor_SMD:CP_Elec_6.3x5.3 | C5 |
| 1 | 15k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 1N5824 | Diode_SMD:D_SMC | D1 |
| 1 | 2,7V | Diode_SMD:D_SMA | D8 |
| 1 | 220 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 2200uF/16V | Capacitor_SMD:CP_Elec_6.3x5.3 | C1 |
| 1 | 220nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 220uF/6V3 | Capacitor_SMD:CP_Elec_6.3x5.3 | C3 |
| 1 | 33uH | Inductor_SMD:L_Bourns_SRR1260 | L2 |
| 1 | Conn_02x05_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical_SMD | J2 |
| 1 | Conn_02x06_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J1 |
| 1 | INA219AxD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U1 |
| 1 | M5 Stamp-S3 | Library:Stamp-S3-DIP | U2 |
| 1 | MAX40200AUK | Package_TO_SOT_SMD:SOT-23-5 | U8 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | SS14 | Diode_SMD:D_SMC | D2 |
| 1 | SS14 | Diode_SMD:D_SMA | D7 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS647_Sx50 | SW1 |
More from WGRL/SMIW-projekt
2- 2 layers107.9 × 71.2 mm

- 2 layers107.9 × 71.2 mm

Similar boards
- 2 layers102 × 66 mm

FREE ENERGY ESP
Sureshbkmr/Energy-Harvesting-Based-on-Beaden-Research-Paper
Based on Beaden Research Paper full custom PCB
60 parts - 2 layers118.3 × 68 mm

Field eyes v2.before spreading
louismomo66/field-eyes_pcb
Open fieldeyesv2.kicadpro in KiCad 9. The whole circuit is one flat schematic (fieldeyesv2.kicadsch): all 168 parts are on a single page, in four framed sections.
168 parts - 2 layers75.5 × 2.6 mm

Pod PCB
rekirxs/NeoXalle-PCB-Slave
A full PCB work for a sport sensorial reaction device called NeoXalle.
76 parts - 2 layers110 × 30 mm

Vantage Power
Georgebruh/Vantage-System-for-ANDAM
Design files and firmware of the Vantage IoT sensor node, by Team sevenUP. The node is the field unit of a flood-monitoring system.
37 parts - 2 layers39.9 × 30.6 mm

- 2 layers63.5 × 22.9 mm

LoRaWan1262 jlc
svcguy/LoRaWAN-Feather-Hardware
Schematic and PCB for a Feather-compatible, LoRaWAN-compatible board
86 parts4 - 4 layers45.2 × 41.2 mm

MCU Board 0.3
thejamesrhodes/Hyades-Flight-Computer
Full Hardware and Electronics design, Bare-metal GNC flight software for an actively attitude-controlled high-power rocket
120 parts1Apache-2.0 - 2 layers230.1 × 118.5 mm

POWER 0-50
Aleksei327/STM32G474-Precision-Lab-Power-Supply
Precision 0–50 V programmable laboratory PSU with 1 mV/1 mA setting steps, hybrid synchronous-buck + linear regulation, STM32G474 control, INA228 metering, and layered hardware protection.
207 parts4
Questions
How big is the SMIW projekt PCB?
It measures 107.8 × 71.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SMIW projekt use?
54 parts, built around the LM2596S-5.0, MT3608, MAX40200AUK and 100UF/16V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SMIW projekt KiCad files?
From the WGRL/SMIW-projekt repository on GitHub, at the commit this page was made from: the board is main/main.kicad_pcb and its schematic main/main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SMIW projekt design in my own project?
Its repository states no licence, so its author keeps all rights: ask WGRL before reusing the design.