Skip to the content
2 layers110 × 30 mmVantage Power, the printed circuit board in 3D

Design files and firmware of the Vantage IoT sensor node, by Team sevenUP. The node is the field unit of a flood-monitoring system.

Size
110 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
18
Pads
99
Tracks, vias
109, 4
Pours
3
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
25 Oct 2026
Updated
6 Nov 2026

Overview

Vantage Power is an open-source printed circuit board by Georgebruh, from the Georgebruh/Vantage-System-for-ANDAM repository on GitHub. It is a 2-layer board of 110 × 30 mm with 37 parts on 18 nets, routed with 109 tracks and 4 vias.

It is built around the MT3608, MAX40200AUK and RT9080-33GJ5, with the TPS2051BD, SMAJ9.0CA and SS34 among its other parts. Its parts include 9 capacitors, 7 resistors, 6 ICs, 3 diodes and 2 connectors.

Main components

6

README

README.md

Vantage

Design files and firmware of the Vantage IoT sensor node, by Team sevenUP. The node is the field unit of a flood-monitoring system. This repository holds the hardware (schematics, PCB layout, libraries, drawings and the instruction documents) and the node firmware.

Current release: Rev B (2026-11-05), tag rev-B: power board Rev B, sensor board Rev A (unchanged).

BoardStatus
Sensor boardSchematic and PCB complete. Single-sided, made at home by toner transfer.
Power boardSchematic and PCB complete. One copper layer, made at home by toner transfer, same outline and mounting holes as the sensor board.

The node is two boards joined by one 6-way JST XH cable (J1 to J1):

  • Sensor board: carries the ESP32-S3 dev board (YD-ESP32-S3, header rows 25.4 mm apart) and the sensor interfaces: AJ-SR04M ultrasonic, BME280, rain gauge, TF-Luna (optional).
  • Power board: protected 1S battery pack, solar MPPT charger module, 3.3 V LDO with ideal diode, switched 5 V boost for the sensors (SENS_EN) and two INA226 current monitor modules.

Repository layout

text
Vantage-Hardware/
├── sensor-board/           KiCad project of the sensor board (schematic + PCB)
├── power-board/            KiCad project of the power board (schematic + PCB)
├── lib/                    shared Vantage symbol and footprint library
├── outputs/
│   ├── sensor-board/       schematic PDF, copper artwork, assembly drawing, BOM, drill table
│   └── power-board/        schematic PDF, copper artwork, assembly drawing, envelope, BOM, drill table
├── docs/                   instruction documents (PDF)
│   └── src/                document sources, figures, fonts and build script
├── firmware/               ESP32-S3 firmware (PlatformIO) and the gateway receiver
└── tools/                  script that regenerates the drawings in outputs/

Files

KiCad design files

FileDescription
sensor-board/Vantage_Sensor.kicad_proSensor board project (design rules for toner transfer: 0.6 / 1.0 mm tracks, 0.5 mm gaps)
sensor-board/Vantage_Sensor.kicad_schSensor board schematic
sensor-board/Vantage_Sensor.kicad_pcbSensor board PCB, 110 × 30 mm, copper on the bottom only, two wire links on top
sensor-board/fp-lib-table, sym-lib-tableProject library tables, pointing to lib/
power-board/Vantage_Power.kicad_proPower board project (same design rules for toner transfer as the sensor board)
power-board/Vantage_Power.kicad_schPower board schematic
power-board/Vantage_Power.kicad_pcbPower board PCB, 110 × 30 mm, copper on the bottom only, two wire links on top
power-board/Vantage_Power.kicad_druCustom design rule: 0.35 mm clearance between the pins of the SOT-23 parts
power-board/fp-lib-table, sym-lib-tableProject library tables, pointing to lib/

Library

FileDescription
lib/Vantage.kicad_symSymbols: ESP32-S3 dev board, INA226 module, CN3791 module, MAX40200, MT3608, RT9080-33, TPS2051B
lib/Vantage.pretty/Footprints with enlarged pads for toner transfer and hand drilling; SMD footprints placed on the copper side

Drawings and tables (outputs/)

FileDescription
outputs/sensor-board/Vantage_Sensor_Schematic.pdfSensor board schematic
outputs/sensor-board/Vantage_Sensor_Copper-Artwork_Letter.pdfCopper artwork, 1:1, four copies on US Letter. Print at 100 % / Actual size, do not mirror.
outputs/sensor-board/Vantage_Sensor_Copper-Artwork_A4.pdfSame, on A4
outputs/sensor-board/Vantage_Sensor_Assembly-Drawing.pdfAssembly drawing, 2:1: component side and copper side
outputs/sensor-board/Vantage_Sensor_BOM.csvSensor board bill of materials
outputs/sensor-board/Vantage_Sensor_Drill.csvDrill sizes and counts
outputs/power-board/Vantage_Power_Schematic.pdfPower board schematic
outputs/power-board/Vantage_Power_Copper-Artwork_Letter.pdfCopper artwork, 1:1, four copies on US Letter. Print at 100 % / Actual size, do not mirror.
outputs/power-board/Vantage_Power_Copper-Artwork_A4.pdfSame, on A4
outputs/power-board/Vantage_Power_Assembly-Drawing.pdfAssembly drawing, 2:1: component side and copper side
outputs/power-board/Vantage_Power_Envelope.pdfModule envelope, 1:1: the space the assembled board needs in the enclosure
outputs/power-board/Vantage_Power_BOM.csvPower board bill of materials
outputs/power-board/Vantage_Power_Drill.csvDrill sizes and counts

Documents (docs/)

The documents follow the layout of ISO documents: cover, contents, foreword, introduction, numbered clauses (scope, references, terms, ...), normative and informative annexes, bibliography.

FileDescription
docs/VNT-001_Sensor-board_Fabrication-assembly-test.pdfVNT-001 Vantage — Sensor board — Fabrication, assembly and test
docs/VNT-002_Power-board_Fabrication-assembly-test.pdfVNT-002 Vantage — Power board — Fabrication, assembly and test
docs/src/VNT-001.md, VNT-002.mdDocument sources (edit these, then rebuild the PDFs)
docs/src/build.pyBuilds the PDFs from the sources
docs/src/iso.cssPage layout and styles
docs/src/figures/Figures used by the documents
docs/src/fonts/Caladea font (SIL Open Font License, OFL.txt)

Firmware (firmware/)

FileDescription
firmware/README.mdSetup, build environments, power modes and the data format
firmware/platformio.iniPlatformIO project: field (normal operation) and bench (bench and functional tests)
firmware/include/config.hNode ID, gateway URL, mounting height, intervals and battery thresholds
firmware/include/pins.hPin map (VNT-001, Annex C)
firmware/include/secrets.example.hTemplate for the Wi-Fi credentials; copy to secrets.h, which is not committed
firmware/src/Firmware sources: sensors, rain gauge, power monitors, uplink, sleep and power modes
firmware/tools/receiver.pyReceiver for the gateway computer; writes the readings to a CSV file

Tools

FileDescription
tools/make_outputs.pyRegenerates the schematic PDFs, copper artwork, assembly drawings, power board envelope and document figures with kicad-cli; python3 tools/make_outputs.py power does one board

Opening the design

The KiCad files are in the KiCad 7 format; KiCad 8, 9 and 10 open them. The first save in KiCad 10 upgrades the file format; commit that upgrade on its own, without other changes, so later diffs stay readable.

Both projects use the shared library in lib/ through their own library tables, so no global library setup is needed.

Title blocks

Every file carries the same title block content: Team sevenUP, title Vantage — Sensor board or Vantage — Power board, date and revision. No comment lines. The documents carry the same fields in the title block on their cover.

Revisions

All files of a release share one revision letter, shown in every title block and on the document covers. Each release is tagged rev-<letter> and listed in CHANGELOG.md. Things that need to change are tracked as GitHub issues.

To make a new revision:

  1. Change the design in KiCad.
  2. Set the new revision letter and date in the title block of every changed file (Page Settings in KiCad).
  3. Regenerate the drawings: python3 tools/make_outputs.py, or plot them from KiCad.
  4. Update the BOM and drill CSV files if parts or holes changed.
  5. Update the document sources (edition, date, rev and the content) and rebuild: python3 docs/src/build.py.
  6. Add the revision to CHANGELOG.md, commit, and tag it rev-<letter>.

Rebuilding the outputs

Drawings (needs KiCad's kicad-cli on the PATH, or its path in KICAD_CLI):

text
pip install pypdf reportlab
python3 tools/make_outputs.py

Documents:

text
pip install markdown beautifulsoup4 weasyprint
python3 docs/src/build.py

Parts

37
QtyValueFootprintReferences
422uFVantage:C_1206_HandSolder_BottomC1, C4, C7, C8
2100nFVantage:C_1206_HandSolder_BottomC2, C6
210uFVantage:C_1206_HandSolder_BottomC3, C5
24.7kVantage:R_1206_HandSolder_BottomR2, R3
2M3Vantage:MountingHole_3.2mm_M3_KeepCopper3.5mmH1, H2
10RVantage:R_1206_HandSolder_BottomR7
1100kVantage:R_1206_HandSolder_BottomR6
110kVantage:R_1206_HandSolder_BottomR1
11S PACK (BMS)Vantage:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal_TonerBT1
1220uF 16VVantage:CP_Radial_D6.3mm_P2.50mm_TonerC9
122kVantage:R_1206_HandSolder_BottomR4
122uH 1AVantage:L_Radial_D8.0mm_P5.00mm_TonerL1
13.0kVantage:R_1206_HandSolder_BottomR5
13V3Vantage:TestPoint_Pad_D2.0mm_BottomTP2
15VVantage:TestPoint_Pad_D2.0mm_BottomTP3
1CN3791 MPPT 6VVantage:CN3791_Socket_1x04M1
1GNDVantage:TestPoint_Pad_D2.0mm_BottomTP4
1INA226 0x40Vantage:INA226_Socket_1x08_UprightU1
1INA226 0x44Vantage:INA226_Socket_1x08_UprightU2
1MAX40200Vantage:SOT-23-5_HandSolder_BottomU3
1MT3608Vantage:SOT-23-6_HandSolder_BottomU6
1PTC 1.5AVantage:Fuse_1812_HandSolder_BottomF1
1RT9080-33Vantage:SOT-23-5_HandSolder_BottomU5
1SENSORVantage:JST_XH_S6B-XH-A_1x06_P2.50mm_Horizontal_TonerJ1
1SMAJ9.0CAVantage:D_SMA_HandSolder_Bottom_WideGapD1
1SOLARVantage:TerminalBlock_3.5mm_1x02_TonerJ2
1SS34Vantage:D_SMA_HandSolder_BottomD3
1SS34Vantage:D_SMA_HandSolder_Bottom_WideGapD2
1TPS2051BVantage:SOT-23-5_HandSolder_BottomU4
1VBATVantage:TestPoint_Pad_D2.0mm_BottomTP1

More from Georgebruh/Vantage-System-for-ANDAM

1
  • 2 layers110 × 30 mmVantage Sensor, the printed circuit board in 3D

    Vantage Sensor

    Georgebruh/Vantage-System-for-ANDAM

    Design files and firmware of the Vantage IoT sensor node, by Team sevenUP. The node is the field unit of a flood-monitoring system.

    26 parts

Similar boards

  • 4 layers117.9 × 99.1 mmGNSS Firehose, the printed circuit board in 3D

    GNSS Firehose

    pmonta/GNSS_Firehose

    Wideband front-end digitizer for GPS, GLONASS, Galileo, BeiDou

    519 parts69
  • 2 layers271.5 × 81 mmAllez, the printed circuit board in 3D

    Allez

    zakariyavkhan/allez-keyboard

    Hardware and firmware files for the allez! mechanical keyboard

    142 partsGPL-3.0
  • 2 layers64 × 39 mmSigmaLink USBi, the printed circuit board in 3D

    SigmaLink USBi

    freeDSP/SigmaLink-USBi

    The freeDSP SigmaLink USBi PROGRAMMER is an all-in-one real-time programming interface.

    31 parts33CC-BY-SA-4.0
  • 2 layers64 × 39 mmSigmaLink USBi, the printed circuit board in 3D

    SigmaLink USBi

    xfdr0805/usbi

    sigmadsp usb link

    40 parts1
  • 2 layers92 × 64 mmPico2 trace, the printed circuit board in 3D

    Pico2 trace

    hathach/pcb

    PCB assembly

    64 parts
  • 2 layers83.8 × 61 mmSound o hedron, the printed circuit board in 3D

    Sound o hedron

    TFK1410/sound-o-hedron

    22 partsGPL-3.0
  • 2 layers107.8 × 71.2 mmSMIW projekt, the printed circuit board in 3D

    SMIW projekt

    WGRL/SMIW-projekt

    Projekt 7 na SMIW

    54 parts
  • 2 layers39.9 × 30.6 mmPWR Control, the printed circuit board in 3D

    PWR Control

    Heorenmaru/Hardware

    56 parts1CC-BY-SA-4.0

Questions

How big is the Vantage Power PCB?

It measures 110 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Vantage Power use?

37 parts, built around the MT3608, MAX40200AUK, RT9080-33GJ5 and TPS2051BD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Vantage Power KiCad files?

From the Georgebruh/Vantage-System-for-ANDAM repository on GitHub, at the commit this page was made from: the board is power-board/Vantage_Power.kicad_pcb and its schematic power-board/Vantage_Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Vantage Power design in my own project?

Its repository states no licence, so its author keeps all rights: ask Georgebruh before reusing the design.