2 layers238 × 32.4 mm
2 layers142.2 × 64.4 mm
A320 Home Cockpit project
- Size
- 142.2 × 64.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 128
- Pads
- 342
- Tracks, vias
- 1,208, 27
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Jan 2020
- Updated
- 11 Apr 2021
Overview
Fcu mb is an open-source printed circuit board by VirtualGit, from the VirtualGit/HomeCockpitA320 repository on GitHub. It is a 2-layer board of 142.2 × 64.4 mm with 69 parts on 128 nets, routed with 1,208 tracks and 27 vias.
It is built around the TLC5917IN, MAX7219M and BS170, with the L7805 among its other parts. Its parts include 30 resistors and 7 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4
TLC5917IN
PDIP-16-40℃~+125℃ 120mA 20V 3% 30MHz 3V~5.5V 8 Built-in Over-Temperature Protection (OTP)、Short-Circuit Protection PWM PDIP-16 LED Drivers ROHSTexas InstrumentsLED Drivers
MAX7219M
SOP-24-300mil10MHz 150uA 3-Wire Serial Interface 30mA 320mA 4V~5.5V 8 Segment x 8 Digit Built-in display RAM、PWM dimming、BCD input latch function、Power-up display blanking、Lamp test function、Cascadable function SOP-24-300mil Digital Tube Drivers ROHSHGSEMIDigital Tube Drivers
BS170
TO-92-55℃~+150℃ 1 N-channel 1.2Ω@10V 17pF 2.1V 24pF 500mA 60V 7pF 830mW N-Channel TO-92 MOSFETs ROHSonsemiMOSFETs
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdParts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | SW_Push | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | SW_HDG_TRK1, SW_METRIC_ALT1, SW_PULL_ALT1, SW_PULL_HDG1, SW_PULL_SPEED1, SW_PULL_VS1, SW_PUSH_ALT1, SW_PUSH_HDG1, SW_PUSH_SPEED1, SW_PUSH_VS1, SW_SPEED_MACH1 |
| 6 | 100Ohms | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R23, R24, R25, R26, R27, R28 |
| 6 | Korry | Connector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | KORRY_AP1, KORRY_AP2, KORRY_APPR1, KORRY_ATHR1, KORRY_EXPED1, KORRY_LOC1 |
| 4 | Rotary_Encoder | home-cockpit-footprints:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical_RotaryEncoder | ROT_ALT1, ROT_HDG1, ROT_SPEED1, ROT_VS1 |
| 3 | 1µF | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C5, C6, C7 |
| 3 | TLC5917IN | home-cockpit-footprints:Texas_Instruments-TLC5917IN-Manufacturer_Recommended | DriverLed1, DriverLed2, DriverLed3 |
| 2 | 0,1µF | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C3, C4 |
| 2 | 100kOhms | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5 |
| 2 | 120kOhms | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R22 |
| 2 | 15kOhms | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R15 |
| 2 | 1kohms | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R29 |
| 2 | 22kOhms | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11, R19 |
| 2 | 33kOhms | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R13 |
| 2 | 47kOhms | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12, R17 |
| 2 | 68kOhms | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16, R18 |
| 2 | 8,2kOhms | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R8 |
| 2 | 9,53kohms | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | 91kOhms | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R20, R21 |
| 2 | MAX7219 | Package_DIP:DIP-24_W7.62mm_Socket | DriverHdgVs1, DriverSpeedAlt1 |
| 1 | 100µF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C1 |
| 1 | 10µF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C2 |
| 1 | 150kOhms | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R14 |
| 1 | 2kohms | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R30 |
| 1 | Arduino_Nano_v3.x | home-cockpit-footprints:Arduino_Micro_Socket | Arduino1 |
| 1 | BS170 | Package_TO_SOT_THT:TO-92_Inline | T1 |
| 1 | Conn_01x02_Male | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | BACKLIGHT1 |
| 1 | Conn_Coaxial_Power | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | PWR1 |
| 1 | Connector-FPC-50pins | home-cockpit-footprints:Connector-FPC-50pins-0.5mm | DisplayConnector1 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | REG1 |
More from VirtualGit/HomeCockpitA320
1Similar boards
- 2 layers190.5 × 101.6 mm
- 2 layers61 × 67.3 mm
Led breakout
InfectedLan/NfcHardware
Repository containing the open source hardware for the NFC platform
34 partsGPL-3.0 - 2 layers140 × 40 mm
- 2 layers50.5 × 52 mm
WellerRT Station projekt
MarcelMG/DIY-Soldering-Station-Controller
A soldering station controller compatible with Weller RT tips
45 parts44MIT - 2 layers100 × 80 mm
- 2 layers114 × 89 mm
- 2 layers70.2 × 144.1 mm
- 2 layers175 × 95 mm
Portail jc
f1iwq2/Came_IWQ
Carte de remplacement pour portail CAME ZBX6N/7N - A base d'arduino nano
115 parts
Questions
How big is the Fcu mb PCB?
It measures 142.2 × 64.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fcu mb use?
69 parts, built around the TLC5917IN, MAX7219M, BS170 and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fcu mb KiCad files?
From the VirtualGit/HomeCockpitA320 repository on GitHub, at the commit this page was made from: the board is Electronic/fcu/fcu-mb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fcu mb design in my own project?
Its repository states no licence, so its author keeps all rights: ask VirtualGit before reusing the design.