2 layers
Led breakout v2
InfectedLan/NfcHardware
Repository containing the open source hardware for the NFC platform
23 partsGPL-3.0
2 layers61 × 67.3 mm
Led breakout
InfectedLan/NfcHardwareRepository containing the open source hardware for the NFC platform
- Size
- 61 × 67.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 62
- Pads
- 131
- Tracks, vias
- 307, 9
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 21 Nov 2017
- Updated
- 9 Dec 2017
Overview
Led breakout is an open-source printed circuit board by InfectedLan, from the InfectedLan/NfcHardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 61 × 67.3 mm with 34 parts on 62 nets, routed with 307 tracks and 9 vias.
It is built around the MFRC522B and TLC5917IN. Its parts include 15 connectors, 9 resistors, 3 transistors, 3 fuses and 2 ICs. It belongs with the interfaces and adapters boards of this library.
Main components
2
MFRC522B
QFN-32-EP(5x5)106Kbit/s、212Kbit/s、424Kbit/s、848Kbit/s 13.56MHz 2.5V~4V Built-in antenna driver、Data verification、Low power wake-up I2C,SPI,UART ISO 14443A QFN-32-EP(5x5) RFID ICs ROHSJSMSEMIRFID ICs
TLC5917IN
PDIP-16-40℃~+125℃ 120mA 20V 3% 30MHz 3V~5.5V 8 Built-in Over-Temperature Protection (OTP)、Short-Circuit Protection PWM PDIP-16 LED Drivers ROHSTexas InstrumentsLED Drivers
README
README.mdInfectedNfc
Repository containing coumentation on our upcoming NFC platform
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | R | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 3 | Fuse | Fuse_Holders_and_Fuses:Fuse_SMD1206_HandSoldering | F1, F2, F3 |
| 3 | I2C | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | J4, J6, J7 |
| 3 | MOSFET | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | Q1, Q2, Q3 |
| 1 | LED1 | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | J8 |
| 1 | LED2 | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | J9 |
| 1 | LED3 | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | J10 |
| 1 | LED4 | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | J11 |
| 1 | LED5 | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | J12 |
| 1 | LED6 | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | J13 |
| 1 | LED7 | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | J14 |
| 1 | LED8 | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | J15 |
| 1 | LED_STRIP | Socket_Strips:Socket_Strip_Straight_1x04_Pitch2.54mm | J1 |
| 1 | LOGO | infected-led-breakout:infected_logo | G*** |
| 1 | LOGO | infected-led-breakout:bisco | G*** |
| 1 | MFRC-522 | Socket_Strips:Socket_Strip_Straight_1x08_Pitch2.54mm | U1 |
| 1 | POWER | Socket_Strips:Socket_Strip_Straight_1x03_Pitch2.54mm | J3 |
| 1 | Raspberry_Pi_2_3 | Pin_Headers:Pin_Header_Straight_2x20_Pitch2.54mm | J2 |
| 1 | Serial | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | J5 |
| 1 | TLC5917 | Housings_DIP:DIP-16_W10.16mm | U2 |
More from InfectedLan/NfcHardware
2- 2 layers
Led breakout v1
InfectedLan/NfcHardware
Repository containing the open source hardware for the NFC platform
22 partsGPL-3.0
Similar boards
- 2 layers95 × 147.3 mm
- 2 layers190.5 × 101.6 mm
- 2 layers142.2 × 64.4 mm
- 2 layers140 × 40 mm
- 2 layers142.5 × 106.4 mm
- 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 2 layers171.2 × 72.9 mm
Amiga gfxcard old
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
34 parts1k - 2 layers53.5 × 62.5 mm
Led matrix
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
34 parts915
Questions
How big is the Led breakout PCB?
It measures 61 × 67.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Led breakout use?
34 parts, built around the MFRC522B and TLC5917IN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Led breakout KiCad files?
From the InfectedLan/NfcHardware repository on GitHub, at the commit this page was made from: the board is led-breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Led breakout design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).