2 layers100 × 100 mm
Langpie
langpie/langpie
An Opensource Raspberry Pi Based Smart Car Project (ORPSC Project) - 树莓派开源智能车项目
80 parts48
2 layers21.5 × 18.2 mm
DRV8833MotorDriver
VikramR3/DRV8833MotorDriverTI DRV8833 dual H-bridge motor driver breakout. Designed in KiCad 9.
- Size
- 21.5 × 18.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 14
- Pads
- 55
- Tracks, vias
- 72, 3
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 16 Aug 2026
- Updated
- 16 Aug 2026
Overview
DRV8833MotorDriver is an open-source printed circuit board by VikramR3, from the VikramR3/DRV8833MotorDriver repository on GitHub, published under the MIT licence. It is a 2-layer board of 21.5 × 18.2 mm with 8 parts on 14 nets, routed with 72 tracks and 3 vias.
It is built around the DRV8833PWP. Its parts include 3 capacitors, 2 connectors, 1 resistor, 1 IC and 1 diode. It belongs with the robots and motor control and interfaces and adapters boards of this library.
Main components
1README
README.mdDRV8833 Motor Driver
A 2-layer breakout for the TI DRV8833 dual H-bridge, carrying the charge-pump and bulk decoupling on board and bringing both motor channels out on 0.1" headers alongside the PWM inputs, nSLEEP and nFAULT. Drives two brushed DC motors or one bipolar stepper. Designed in KiCad 9.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1, J2 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-6032-20_AVX-F | C3 |
| 1 | 2.2UuF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | DRV8833PWP | Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm_ThermalVias | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
Similar boards
- 4 layers110 × 50 mm
OpenHand v1
AleksaHeler/OpenHand
Our attempt at a prosthetic hand using STM32 microcontroller with custom PCB and mechanics
214 parts13MIT - 2 layers70 × 90 mm
- 4 layers117 × 107 mm
Mainboard dual battery
shurik179/yozh
Small robot based on Pololu's Zumo chassis but programmable in CircuitPython
121 parts8MIT - 4 layers29.9 × 32 mm
Models heart rev1.1
KushlaVR/models-heart
Можливості: Керування через WIFI з телефона або ПК 5 незалежних каналів (світлодіоди/сервомотори) 1 Н-міст для підключення мотора (піковий струм до 3А) Вмонтована BMS 1S та контроллер заряду Li-Ion акумулятора з…
106 parts7GPL-3.0 - 2 layers200 × 100 mm
Mobo
opulo-inc/lumenpnp-archive
This repository is a public archive of the LumenPnP Pick and Place (formerly Index) source material from the beginning in mid-2020 until May 2022. The current source can be found at https://github.com/opulo-inc/lumenpnp
88 parts6GPL-3.0 - 4 layers91.2 × 100.3 mm
- 4 layers66 × 83.1 mm
Zumo PiZero
wallComputer/PiZumo_Robot
Git Folder to share hardware and software files for PiZumo Robot.
117 parts3GPL-2.0
Questions
How big is the DRV8833MotorDriver PCB?
It measures 21.5 × 18.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DRV8833MotorDriver use?
8 parts, built around the DRV8833PWP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DRV8833MotorDriver KiCad files?
From the VikramR3/DRV8833MotorDriver repository on GitHub, at the commit this page was made from: the board is DRV8833MotorDriver.kicad_pcb and its schematic DRV8833MotorDriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DRV8833MotorDriver design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).