Skip to the content
2 layers66 × 50 mmStep down converter odrive rpi, the printed circuit board in 3D

Step down converter odrive rpi

VedantC2307/PiPowerBridge

A power distribution PCB designed to manage power delivery for a Raspberry Pi and ODrive motor controller. The board is specifically optimized to mount directly on top of the ODrive controller for a compact and…

Size
66 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
13
Pads
45
Tracks, vias
77, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
26 Feb 2025
Updated
27 Aug 2025

Overview

Step down converter odrive rpi is an open-source printed circuit board by VedantC2307, from the VedantC2307/PiPowerBridge repository on GitHub. It is a 2-layer board of 66 × 50 mm with 17 parts on 13 nets, routed with 77 tracks and 0 vias.

It is built around the LM2676T-5.0 and XT60-M. Its parts include 5 capacitors, 4 connectors, 2 diodes, 1 resistor and 1 IC.

Main components

2

README

README.md

PiPowerBridge

A power distribution PCB designed to manage power delivery for a Raspberry Pi and ODrive motor controller. The board is specifically optimized to mount directly on top of the ODrive controller for a compact and integrated solution.

Features ⚡

  • Input Voltage: 33V (LiPo battery) 🔋
  • Output:
    • 5V DC regulated output for Raspberry Pi
    • Direct power distribution to ODrive motor controller
  • Form factor optimized for direct mounting on top of ODrive
  • Additional SPI interface pins for connecting external devices 🔌

Description 📝

This PCB converts 33V input from a LiPo battery to 5V to power for the Raspberry Pi, while also directly powering the ODrive motor controller. It’s designed to stack directly on top of the controller, saving space and keeping the setup tidy. It includes an additional SPI interface pins for easily connecting external sensors like encoder.

PCB Design 🎨

3D Model View 🖥️

3D Model of the PCB

PCB Layout 📐

PCB Layout Design

Printed PCB

PCB Layout Design

Parts

17
QtyValueFootprintReferences
215µFpower_distribution_board:PCB capacitor 15uFC1, C2
2TestPointTestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfileTP1, TP2
2XT60-MXT60-M:AMASS_XT60-MJ1, J3
2~Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ2, J4
10.01µF0.01uF capacitor:CAP_C410C_AX_Z5U_U5TA_KEMC4
10.47µFCapacitor 0.47uF:CAPRR254W54L381T254H466C3
1180µF/16V180uF Capacitor:CAPPRD350W60D800H1200C5
133µH33µH Inductor Inductor:IND_SBC8-330-452_KEML1
1Fuse (3A)Polyfuse 3A:FUSE_CMF-RL50A-0_BRNF1
1LEDLED_THT:LED_D2.0mm_W4.0mm_H2.8mm_FlatTopD2
1LM2676T-5.0LM2676T_5_0_NOPB:TA07BU3
1RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
1SR305SR305 - Diode:DIOAD1990W125L900D530D1

Similar boards

  • 4 layers100.1 × 60.2 mmHades, the printed circuit board in 3D

    Hades

    pms67/HadesFCS

    Complete flight control system designed from scratch. Hardware designed with KiCad.

    215 parts1kBSD-3-Clause
  • 2 layers120 × 100 mmRoot, the printed circuit board in 3D

    Root

    GonzaCerv/noah-hardware

    This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.

    127 parts28MIT
  • 2 layers110 × 110 mmMs pcb, the printed circuit board in 3D

    Ms pcb

    opatiny/micromouse

    Designing a custom micromouse robot.

    39 parts15CERN-OHL-P-2.0
  • 2 layersPlaca alimentacao, the printed circuit board in 3D

    Placa alimentacao

    edromufu/edromufu

    Repositório da EDROM-UFU destinado ao desenvolvimento do projeto humanoide para participação nas competições LARC e ROBOCUP.

    26 parts9MIT
  • 2 layers107.9 × 63.2 mmTeam2(10-30), the printed circuit board in 3D

    Team2(10-30)

    RoboJackets/robowrestling

    Autonomous 3kg sumo

    116 parts9MIT
  • 2 layers99.5 × 67 mmController Board, the printed circuit board in 3D

    Controller Board

    kairobyte/bipedal_self_balance

    A bipedal self balancing robot with 2DOF in each leg. Built from scratch.

    23 parts7MIT
  • 4 layers65.8 × 77.2 mmVtx scanner pcb, the printed circuit board in 3D

    Vtx scanner pcb

    deets/deets-fpv-vtx-scanner

    39 parts5
  • 2 layers151.3 × 122.6 mmRemote v2, the printed circuit board in 3D

    Remote v2

    KIIT-Robotic-Society/Dharma_RoboFest4.0

    Dharma Bot is a quadruped robotic dog featuring 12-DOF locomotion, real-time sensing, and a modular subsystem design.

    135 parts4MIT

Questions

How big is the Step down converter odrive rpi PCB?

It measures 66 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Step down converter odrive rpi use?

17 parts, built around the LM2676T-5.0 and XT60-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Step down converter odrive rpi KiCad files?

From the VedantC2307/PiPowerBridge repository on GitHub, at the commit this page was made from: the board is Step_down_converter_odrive_rpi/Step_down_converter_odrive_rpi.kicad_pcb and its schematic Step_down_converter_odrive_rpi/Step_down_converter_odrive_rpi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Step down converter odrive rpi design in my own project?

Its repository states no licence, so its author keeps all rights: ask VedantC2307 before reusing the design.