2 layers78.1 × 80 mm
2 layers86.4 × 76.2 mm
Ads circuit v2
VP1147/adsArduino-based Atmospheric Deposition Sampler.
- Size
- 86.4 × 76.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 10
- Pads
- 36
- Tracks, vias
- 71, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 28 Oct 2022
- Updated
- 23 Mar 2025
Overview
Ads circuit v2 is an open-source printed circuit board by VP1147, from the VP1147/ads repository on GitHub, published under the MIT licence. It is a 2-layer board of 86.4 × 76.2 mm with 18 parts on 10 nets, routed with 71 tracks and 0 vias.
It is built around the TIP122. Its parts include 9 connectors, 5 resistors and 1 transistor. It belongs with the sensors and measurement boards of this library.
Main components
1README
README.mdArduino microcontroler code for ADS (Atmospheric Deposition Sampler).
Instructions, circuits and documentation are avaliable on https://github.com/vp1147/ads.
Copyright and License
This code is under MIT License (See LICENSE for more information).
Copyright (c) 2022 Vinícius Pavão
LCA (Atmospheric Sciences Laboratory), INFI (Institute of Physics), UFMS (Federal University of Mato Grosso do Sul).
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 2 | , | ||
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 39 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | Energia Arduino | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J5 |
| 1 | Entrada Relays | TerminalBlock_RND:TerminalBlock_RND_205-00001_1x02_P5.00mm_Horizontal | J1 |
| 1 | Entrada Sensor IR | TerminalBlock_RND:TerminalBlock_RND_205-00002_1x03_P5.00mm_Horizontal | J8 |
| 1 | LED IR | TerminalBlock_RND:TerminalBlock_RND_205-00001_1x02_P5.00mm_Horizontal | J9 |
| 1 | Negativo switches | TerminalBlock_RND:TerminalBlock_RND_205-00001_1x02_P5.00mm_Horizontal | J4 |
| 1 | Positivo switches | TerminalBlock_RND:TerminalBlock_RND_205-00001_1x02_P5.00mm_Horizontal | J3 |
| 1 | Potentiometer | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | RV1 |
| 1 | Saida p/ motor | TerminalBlock_RND:TerminalBlock_RND_205-00001_1x02_P5.00mm_Horizontal | J2 |
| 1 | Saida switches | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J6 |
| 1 | Sensor p/ Arduino | Connector_PinHeader_1.27mm:PinHeader_1x01_P1.27mm_Vertical | J7 |
| 1 | TIP122 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
More from VP1147/ads
1Similar boards
- 2 layers33 × 34 mm
Analog terminal bell
tenderlove/analog-terminal-bell
A bell for your terminal that is analog
12 parts494MIT - 2 layers130 × 80 mm
Pico controller
cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source
125 parts8GPL-3.0 - 2 layers180 × 90 mm
- 2 layers57.4 × 53.8 mm
Red node with ESP32
futureshocked/NodeRed-ESP32-TerrariumController
This repository contains ESP32 sketches and Node-RED flows from the course "NodeRed ESP32 Make a Terrarium Controller".
25 parts7MIT - 2 layers95.1 × 93.8 mm
TeCoLab Board
ytcsc/TeCoLab
TeCoLab stands for Temperature Control Laboratory. It is a low-cost open-source didactic framework to test the performance of several control strategies regarding temperature control.
61 parts7MIT - 2 layers
LEDControlPCBSMDV2
BioARTS-Lab/Miniature_Microscope
3D-printed fluorescence miniature microscope
31 parts6GPL-3.0 - 2 layers138 × 77 mm
- 2 layers68 × 50.5 mm
Fanspeed
Aniket95-code/Fan-Speed-Controller-NE555-PCB-design
A simple, low-cost DC fan speed controller built around the classic NE555 timer IC operating in astable mode. Fan speed is adjusted by varying the PWM duty cycle via a potentiometer, while a TIP122 Darlington transistor…
19 parts2
Questions
How big is the Ads circuit v2 PCB?
It measures 86.4 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ads circuit v2 use?
18 parts, built around the TIP122. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ads circuit v2 KiCad files?
From the VP1147/ads repository on GitHub, at the commit this page was made from: the board is Kicad/ads_circuit_v2/ads_circuit_v2.kicad_pcb and its schematic Kicad/ads_circuit/ads_circuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ads circuit v2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).