2 layers33 × 34 mm
Analog terminal bell
tenderlove/analog-terminal-bell
A bell for your terminal that is analog
12 parts494MIT
2 layers57.4 × 53.8 mm
Red node with ESP32
futureshocked/NodeRed-ESP32-TerrariumController7This repository contains ESP32 sketches and Node-RED flows from the course "NodeRed ESP32 Make a Terrarium Controller".
- Size
- 57.4 × 53.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 45
- Pads
- 93
- Tracks, vias
- 215, 1
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Jul 2020
- Updated
- 16 Oct 2026
Overview
Red node with ESP32 is an open-source printed circuit board by futureshocked, from the futureshocked/NodeRed-ESP32-TerrariumController repository on GitHub, published under the MIT licence. It is a 2-layer board of 57.4 × 53.8 mm with 25 parts on 45 nets, routed with 215 tracks and 1 via.
It is built around the TIP122. Its parts include 9 resistors, 6 connectors, 4 diodes, 1 capacitor and 1 IC. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdPlease go to the course home page to learn more about this course.
https://app.techexplorations.com/courses/node-red-esp32-make-a-terrarium-controller/
This repository contains ESP32 sketches and Node-RED flows from the course "NodeRed ESP32 Make a Terrarium Controller".
Update, October 2026
The flows have been tested with Node-RED 5.0.8 on Node.js 22 and 26. They work unchanged, but the Node-RED editor and install process look different from the videos. Read UPDATE-2026.md before you start.
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R6, R8, R9 |
| 3 | LED | LED_THT:LED_D5.0mm | D1, D3, D4 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C1 |
| 1 | 200K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 20K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 220K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 300K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 420K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | BMP/BME 280 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J6 |
| 1 | DHT22 terminal | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J5 |
| 1 | D_Schottky | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D2 |
| 1 | ESP32-DEVKITC-32D | Custom_project_footprints:MODULE_ESP32-DEVKITC_PD | U1 |
| 1 | MCU_MOTOR_POWER | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | Moisture Sensor | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Motor | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | Motor Battery | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | TIP122 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | VCC Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | VCC2 Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP3 |
Similar boards
- 2 layers130 × 80 mm
Pico controller
cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source
125 parts8GPL-3.0 - 2 layers180 × 90 mm
- 2 layers95.1 × 93.8 mm
TeCoLab Board
ytcsc/TeCoLab
TeCoLab stands for Temperature Control Laboratory. It is a low-cost open-source didactic framework to test the performance of several control strategies regarding temperature control.
61 parts7MIT - 2 layers
LEDControlPCBSMDV2
BioARTS-Lab/Miniature_Microscope
3D-printed fluorescence miniature microscope
31 parts6GPL-3.0 - 2 layers138 × 77 mm
- 2 layers68 × 50.5 mm
Fanspeed
Aniket95-code/Fan-Speed-Controller-NE555-PCB-design
A simple, low-cost DC fan speed controller built around the classic NE555 timer IC operating in astable mode. Fan speed is adjusted by varying the PWM duty cycle via a potentiometer, while a TIP122 Darlington transistor…
19 parts2 - 2 layers120 × 80 mm
Questions
How big is the Red node with ESP32 PCB?
It measures 57.4 × 53.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Red node with ESP32 use?
25 parts, built around the TIP122. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Red node with ESP32 KiCad files?
From the futureshocked/NodeRed-ESP32-TerrariumController repository on GitHub, at the commit this page was made from: the board is KiCad Terrarium Controller project/Red-node with ESP32.kicad_pcb and its schematic KiCad Terrarium Controller project/Red-node with ESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Red node with ESP32 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).