2 layers100 × 70 mm
2 layers100 × 50 mm
Arm controller single v1.1
UofA-SPEAR/pcb_designs3A place for SPEAR PCBs
- Size
- 100 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 57
- Pads
- 234
- Tracks, vias
- 363, 315
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 15 Mar 2018
- Updated
- 22 Jun 2024
Overview
Arm controller single v1.1 is an open-source printed circuit board by UofA-SPEAR, from the UofA-SPEAR/pcb_designs repository on GitHub. It is a 2-layer board of 100 × 50 mm with 51 parts on 57 nets, routed with 363 tracks and 315 vias.
It is built around the NC7SZ157P6X. Its parts include 18 capacitors, 10 resistors, 4 ICs, 3 connectors and 2 diodes.
Main components
1README
README.mdSPEAR PCB Designs
Central repository to hold PCB designs for SPEAR.
All board documentation shall be held in the Wiki..
Onboarding
If you plan on contributing to the PCB designs, first, you need to go through this list:
- Sign up for github, and fill out the new member form (contact the current team lead for this).
- Follow the GitHub Guides, specifically:
- "Hello World"
- "Understanding the GitHub flow."
- "Documenting your projects on GitHub"
- Follow the Onboarding Task.
Contributing
In order to start a new project, there are a few steps.
- Create a new branch for your project.
- Create a folder for your project, with the name of your project.
- Create an Eagle library for your project.
- Begin a documentation page on the wiki.
Branches
Branches are a useful concept in Git, where you can work on your portion of the project seperately from everyone else, and then "merge" your changes back in.
We make use of branches extensively. For every project, or new task, make a new branch, with
the naming scheme project-name-yourname, where "yourname" is ideally your first name, or at least
something that uniquely identifies you.
When you are finished your design, make a pull request to master, and assign the team lead to review it. This is where the team lead will do a design review and ask to make any required changes. Once these changes are made (or there are no changes), this code will be pulled into the main repository, and the branch will be deleted.
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | arm controller single v1.1:C0603 | C4, C7, C8, C10, C11, C12, C13, C14, C16, C17 |
| 5 | MOSFET-NCHDFN8-5X6 | arm controller single v1.1:ALOM_DFN5X6_8L_EP1_P | U$1, U$2, U$3, U$4, U$6 |
| 4 | 10k | arm controller single v1.1:R0603 | R1, R2, R6, R9 |
| 3 | 1uF | arm controller single v1.1:C0603 | C1, C2, C3 |
| 3 | 680uF | arm controller single v1.1:E5-10,5 | C5, C6, C18 |
| 2 | arm controller single v1.1:1X04 | JP1, JP2 | |
| 2 | arm controller single v1.1:1X20 | JP3, JP4 | |
| 2 | arm controller single v1.1:1X02 | JP5, JP6 | |
| 2 | 0.01 | arm controller single v1.1:R2512 | R3, R7 |
| 2 | 1017503 | arm controller single v1.1:1017503 | J1, J2 |
| 1 | arm controller single v1.1:CHIP-LED0805 | LED1 | |
| 1 | 0R-JUMPB | arm controller single v1.1:B0R-JMP | JMP1 |
| 1 | 1000pF | arm controller single v1.1:C0603 | C9 |
| 1 | 10uF | arm controller single v1.1:C1206 | C15 |
| 1 | 120 | arm controller single v1.1:R0603 | R10 |
| 1 | 1k | arm controller single v1.1:R0603 | R8 |
| 1 | 33k | arm controller single v1.1:R0603 | R4 |
| 1 | 4MB Flash | arm controller single v1.1:SO08 | U1 |
| 1 | 5-103669-4 | arm controller single v1.1:TE_5-103669-4 | J3 |
| 1 | 7.5k | arm controller single v1.1:R0603 | R5 |
| 1 | CGRM4001-G | arm controller single v1.1:SOD-123_MINI-SMA | D1 |
| 1 | DRV8701PRGER | arm controller single v1.1:QFN50P400X400X100-25N | IC2 |
| 1 | NC7SZ157P6X | arm controller single v1.1:SOT65P210X110-6N | IC1 |
| 1 | PLM74700QDBVTQ1 | arm controller single v1.1:SOT95P280X145-6N | PS1 |
| 1 | SMS-004 | arm controller single v1.1:SMS-004 | U$5 |
| 1 | TS5A3357DCUT | arm controller single v1.1:SOP50P310X90-8N | IC3 |
More from UofA-SPEAR/pcb_designs
12- 2 layers55 × 23 mm
- 2 layers100 × 110 mm
- 2 layers100 × 50 mm
- 2 layers25 × 25 mm
- 2 layers51.2 × 23 mm
- 2 layers25 × 25 mm
- 2 layers100 × 50 mm
- 2 layers21.3 × 53.7 mm
- 2 layers51.7 × 30.5 mm
- 2 layers16 × 16 mm
- 2 layers30 × 30 mm
Similar boards
- 2 layers110 × 110 mm
FreeDSP aurora
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
506 parts226CC-BY-SA-4.0 - 4 layers65 × 56 mm
I2S Hat
raptorlightning/I2S-Hat
An SPDIF Hat for the Raspberry Pi 2-X for SPDIF Communication
98 parts19GPL-3.0 - 2 layers50 × 50 mm
- 4 layers140.6 × 108.1 mm
- 4 layers65 × 56.5 mm
- 2 layers113 × 77 mm
- 2 layers74 × 97.5 mm
- 2 layers69.2 × 47.6 mm
AAquad PCB
Fberbari/AAquad
(OUTDATED, see AAQuad-Evolution) a baremetal implementation of a multirotor flight computer.
37 partsGPL-3.0
Questions
How big is the Arm controller single v1.1 PCB?
It measures 100 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Arm controller single v1.1 use?
51 parts, built around the NC7SZ157P6X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arm controller single v1.1 KiCad files?
From the UofA-SPEAR/pcb_designs repository on GitHub, at the commit this page was made from: the board is kicad/arm-controller/arm-controller-1.1/arm controller single v1.1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arm controller single v1.1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask UofA-SPEAR before reusing the design.