

Demo a16a
kicad library for xmos devices
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 117
- Pads
- 495
- Tracks, vias
- 878, 58
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 30 Aug 2016
- Updated
- 13 Mar 2019
Overview
Demo a16a is an open-source printed circuit board by bfarago, from the bfarago/kicad_xmos repository on GitHub, published under the LGPL-3.0 licence. It is a 2-layer board of 50 × 50 mm with 50 parts on 117 nets, routed with 878 tracks and 58 vias.
It is built around the XS1-A16A-128-FB217-C8, NC7WZ17P6X and NC7SZ157P6X, with the NCP699SN33 among its other parts. Its parts include 14 resistors, 13 capacitors, 12 connectors, 6 ICs and 3 inductors.
Main components
4XS1-A16A-128-FB217-C8
FBGA-217(16x16)0℃~+70℃ 12bit 32 Bit 90 900mV~5.5V Built-in Others FBGA-217(16x16) Microcontrollers (MCU/MPU/SOC) ROHSXMOSMicrocontrollers (MCU/MPU/SOC)NC7WZ17P6X
SOT-363-40℃~+125℃ 1.65V~5.5V 10uA 2 2 2.2ns@3.3V,50pF 24mA 24mA Schmitt trigger Unidirectional SOT-363 Buffers, Drivers, Receivers, Transceivers ROHSTECH PUBLICBuffers, Drivers, Receivers, TransceiversNC7SZ157P6X
SC-70-6-40℃~+85℃ 1.65V~5.5V 10uA 2/1 3.5ns@5.0V,15pF 32mA 32mA Multiplexer Output enable high-impedance、Power-off protection、Level shifting Single Supply SC-70-6 Signal Switches, Multiplexers, Decoders ROHSonsemiSignal Switches, Multiplexers, DecodersNCP699SN33
TSOP-5-40℃~+85℃@(Ta) 1 100uVrms 150mA 3.3V 340mV@(150mA) 40uA 50dB@(1kHz)、55dB@(120Hz) 6V Fixed Over Current Protection Positive TSOP-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitors_SMD:C_0603 | C2, C3, C7, C9, C10, C11, C12 |
| 5 | 33R | Resistors_SMD:R_0603 | R7, R8, R12, R13, R14 |
| 5 | 47K | Resistors_SMD:R_0603 | R1, R2, R3, R4, R6 |
| 4 | SCREW | xmos_project:screw | P6, P7, P8, P9 |
| 3 | 4u7 | Inductors:SELF-WE-PD3S | L1, L2, L3 |
| 2 | 10u | Capacitors_SMD:C_0805 | C6, C8 |
| 2 | 33p | Capacitors_SMD:C_0603 | C1, C4 |
| 2 | 47k | Resistors_SMD:R_0603 | R9, R11 |
| 2 | CONN_02X20 | Pin_Headers:Pin_Header_Straight_2x20 | P2, P3 |
| 2 | NC7WZ17 | Housings_SOT-23_SOT-143_TSOT-6:SC-70-6_Handsoldering | U2, U3 |
| 1 | 10k | Resistors_SMD:R_0603 | R5 |
| 1 | 1k | Resistors_SMD:R_0603 | R10 |
| 1 | 25M | Crystals_Oscillators_SMD:Q_49U3HMS | Y1 |
| 1 | 4u7 | Capacitors_SMD:C_0603 | C5 |
| 1 | BARREL_JACK | Connect:BARREL_JACK | CON1 |
| 1 | CONN_02X05 | Pin_Headers:Pin_Header_Straight_2x05 | P1 |
| 1 | CP_Small | Capacitors_SMD:c_elec_3x5.3 | C13 |
| 1 | NC7SZ157 | Housings_SOT-23_SOT-143_TSOT-6:SC-70-6_Handsoldering | U6 |
| 1 | NCP699SN33 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23-5 | U5 |
| 1 | Pillar | xmos_project:Pillar | P5 |
| 1 | XLinkIn | Pin_Headers:Pin_Header_Angled_2x10 | P4 |
| 1 | XLinkOut | Socket_Strips:Socket_Strip_Angled_2x10 | P11 |
| 1 | clip | Connect:TESTPOINT | P10 |
| 1 | ntr4101 P | Housings_SOT-23_SOT-143_TSOT-6:SOT-23_Handsoldering | Q1 |
| 1 | w25x40cl | SMD_Packages:SOIC-8-N | U1 |
| 1 | xs1-a16a-128-fb217 | xmos:BGA217 | U4 |
More from bfarago/kicad_xmos
1- 2 layers

Similar boards
- 4 layers100 × 100 mm

Adau1452 dsp core
EDA-bench/eda-bench
Execution-based benchmark for open-book KiCad PCB reconstruction agents
377 parts4 - 4 layers81.3 × 45.4 mm

- 2 layers110 × 110 mm

FreeDSP aurora
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
506 parts226CC-BY-SA-4.0 - 4 layers65 × 56 mm

I2S Hat
raptorlightning/I2S-Hat
An SPDIF Hat for the Raspberry Pi 2-X for SPDIF Communication
98 parts19GPL-3.0 - 2 layers100 × 50 mm

- 4 layers140.6 × 108.1 mm

- 4 layers65 × 56.5 mm

- 2 layers113 × 77 mm

Questions
How big is the Demo a16a PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Demo a16a use?
50 parts, built around the XS1-A16A-128-FB217-C8, NC7WZ17P6X, NC7SZ157P6X and NCP699SN33. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Demo a16a KiCad files?
From the bfarago/kicad_xmos repository on GitHub, at the commit this page was made from: the board is examples/demo_a16a/demo_a16a.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Demo a16a design in my own project?
Its repository publishes it under the LGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).