2 layers74 × 97.5 mm Antenna Feed, the printed circuit board in 3D

Antenna Feed

Size: 74 × 97.5 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 25
Nets: 70
Pads: 115
Tracks, vias: 136, 20
Pours: 8
Routed: Yes
KiCad: KiCad 4
Created: 3 Jul 2017
Updated: 4 Jun 2018

Overview

Antenna Feed is an open-source printed circuit board by SFUSatClub, from the SFUSatClub/Antenna_Feed repository on GitHub. It is a 2-layer board of 74 × 97.5 mm with 25 parts on 70 nets, routed with 136 tracks and 20 vias.

It is built around the NC7SZ157P6X. Its parts include 14 connectors, 2 ICs and 2 switches. It belongs with the radio and wireless boards of this library.

Main components

NC7SZ157P6X
SC-70-6-40℃~+85℃ 1.65V~5.5V 10uA 2/1 3.5ns@5.0V,15pF 32mA 32mA Multiplexer Output enable high-impedance、Power-off protection、Level shifting Single Supply SC-70-6 Signal Switches, Multiplexers, Decoders ROHSonsemiSignal Switches, Multiplexers, Decoders

README

README.md

#Antenna Feed printed circuit board Board for feeding dipole antenna from unbalance radio board.

Category and platform

Radio and wireless

Project files

Show this board on your page

https://pcbkit.io/boards/SFUSatClub/Antenna_Feed

The board's own page, for a message or a post.

Source

Repository: SFUSatClub/Antenna_Feed
Board file: Antenna-Feed.kicad_pcb
Commit: 914e56f
Licence: Not stated

Parts

Qty	Value	Footprint	References
6	Conn_01x01	SFUSat:PTH-2.5	J5, J6, J7, J8, J15, J18
2	Conn_01x01	SFUSat:via-0.97mm	J1, J4
2	Conn_01x02	Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm	J9, J14
2	Conn_01x03	Socket_Strips:Socket_Strip_Straight_1x03_Pitch2.54mm	J16, J17
2	LIMIT_SWITCH	SFUSat:SS-3GLPD-R	SW1, SW2
2	NC7SZ157	SFUSat:SOT-363	U1, U2
1	LOGO	SFUSat:SFUSat_15mm_2	G***
1	PC104-8BIT	SFUSat:PC104-8bit	J2
1	SMA	SFUSat:SMA-Vert-TH	J3

The 19 most common of 25 parts.

Similar boards

2 layers110 × 110 mm
FreeDSP aurora
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
506 parts226CC-BY-SA-4.0
4 layers65 × 56 mm
I2S Hat
raptorlightning/I2S-Hat
An SPDIF Hat for the Raspberry Pi 2-X for SPDIF Communication
98 parts19GPL-3.0
2 layers50 × 50 mm
Demo a16a
bfarago/kicad_xmos
kicad library for xmos devices
50 parts5LGPL-3.0
2 layers100 × 50 mm
Arm controller single v1.1
UofA-SPEAR/pcb_designs
A place for SPEAR PCBs
51 parts3
4 layers140.6 × 108.1 mm
Drone
iridia-ulb/drone-pcb
Printed circuit board for the drone
228 parts1
4 layers65 × 56.5 mm
Obc drone hat
vooon/obc-drone-hat
Raspberry Pi 3B HAT with additional UART's and RTC
69 parts1
2 layers113 × 77 mm
Adau1492
fabguitar69690/FreeDSP-Aurora-Custom
a modular version of pcb
193 parts
2 layers69.2 × 47.6 mm
AAquad PCB
Fberbari/AAquad
(OUTDATED, see AAQuad-Evolution) a baremetal implementation of a multirotor flight computer.
37 partsGPL-3.0

Questions

How big is the Antenna Feed PCB?

It measures 74 × 97.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Antenna Feed use?

25 parts, built around the NC7SZ157P6X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Antenna Feed KiCad files?

From the SFUSatClub/Antenna_Feed repository on GitHub, at the commit this page was made from: the board is Antenna-Feed.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Antenna Feed design in my own project?

Its repository states no licence, so its author keeps all rights: ask SFUSatClub before reusing the design.