
NBoxRpi
trihome/RasPi_NervesBOX
An extension platform for the Raspberry Pi that mimics the functionality of a PLC.

SubPCB is an open-source printed circuit board by UnknownSP, from the UnknownSP/MedalGame_GINGAAAN_PCB repository on GitHub. It is a 2-layer board of 100 × 100 mm with 69 parts on 113 nets, routed with 270 tracks and 12 vias.
It is built around the TLP222AF and TLP785F. Its parts include 19 resistors, 18 ICs and 7 capacitors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | R_1608 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19 +3 |
| 9 | TLP222A | Package_DIP:DIP-4_W7.62mm | U10, U11, U12, U13, U14, U15, U16, U17, U18 |
| 8 | TLP785 | Package_DIP:DIP-4_W7.62mm | U2, U3, U4, U5, U6, U7, U8, U9 |
| 4 | CP | KAZAAAN:C | C1, C2, C3, C4 |
| 4 | Conn_3p | KAZAAAN:Conn_3pin | J_C5V_I1, J_C5V_O1, J_P5V_I1, J_P5V_O1 |
| 4 | MountingHole_3.2mm_M3_ISO7380_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | REF1, REF1, REF1, REF1 |
| 4 | NH_4p | KAZAAAN:Conn_4pin | J_P24V_I1, J_P24V_O1, J_PG_O1, J_PG_O2 |
| 3 | C | KAZAAAN:C | C5, C6, C7 |
| 2 | NH_10p | KAZAAAN:Conn_10pin | J_CG_O1, J_IN_1 |
| 2 | NH_2p | KAZAAAN:Conn_2pin | J_P12V_I1, J_P12V_O1 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | RESET_SW, USER_SW |
| 1 | Conn_4p | KAZAAAN:Conn_4pin | J_CAN1 |
| 1 | Jump_3p | KAZAAAN:Conn_3pin | J_CAN_TM1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | Cir_Pwr_D |
| 1 | MCP2562-E-P | Package_DIP:DIP-8_W7.62mm | U38 |
| 1 | NH_5p | KAZAAAN:Conn_5pin | J_UART1 |
| 1 | NH_6p | KAZAAAN:Conn_6pin | J_CD_O1 |
| 1 | NH_8p | KAZAAAN:Conn_8pin | J_IN_2 |
| 1 | NUCLEO-F446RE | NUCLEO-F446RE_LIB:MODULE_NUCLEO-F446RE | U_STM1 |

trihome/RasPi_NervesBOX
An extension platform for the Raspberry Pi that mimics the functionality of a PLC.

Maverick765/miatuino
まずはアクセルを完全に戻した状態で[Closed throttle ADC Count]の右の[Get Current]をクリックして、スロットル全閉時の値を取得します。 次に、アクセルを完全に踏み込んだ状態で[Full throttle ADC Count]の右の[Get Current]をクリックして、スロットル前回時の値を取得します。 完了したら[Accept]をクリックします。

cajt/poc-scp-ft-4s-bms-app
Proof of concept fault tolerant SCP with a BMS Application.





It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
69 parts, built around the TLP222AF and TLP785F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the UnknownSP/MedalGame_GINGAAAN_PCB repository on GitHub, at the commit this page was made from: the board is PCB/SubPCB.kicad_pcb and its schematic PCB/SubPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask UnknownSP before reusing the design.