2 layers80 × 60 mm
EnvMonitor
kennySzhucheng/EnvMonitor
🌡️ 智能环境监测站 | STM32F103C8T6 + FreeRTOS + ESP8266 | 温湿度/光照/测距/OLED菜单/ThingSpeak上云 | 从裸机到RTOS到KiCad PCB全流程
27 parts10
2 layers
Comedouro PCB
UTFPR-DispositivosMoveis/ddm_comedouroProjeto em desenvolvimento pelos os alunos do 8 ~ 10 periodo.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 46
- Pads
- 102
- Tracks, vias
- 290, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Sep 2018
- Updated
- 20 Dec 2018
Overview
Comedouro PCB is an open-source printed circuit board by UTFPR-DispositivosMoveis, from the UTFPR-DispositivosMoveis/ddm_comedouro repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 19 parts on 46 nets, routed with 290 tracks and 0 vias.
It is built around the HC-SR04. Its parts include 7 resistors, 5 switches, 3 connectors and 1 transistor. It belongs with the computers and single-board computers boards and the MSP430 boards of this library.
Main components
1README
README.mdddm_comedouro
-
Aplicativo
-
Raspbarry
-
InLoco - MSP430G...
Projeto desenvolvido na Materia de Desenvolvimento De Aplicativos para Dispositvos Moveis - 8CP.
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R1, R2, R3, R4, R5, R6, R7 |
| 5 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5 |
| 2 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J1, J2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | HC-SR04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | LCD JDH162A | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | JDH162A1 |
| 1 | Motor_Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M1 |
| 1 | Q_NPN_CBE | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Q1 |
Similar boards
- 2 layers120.7 × 184.1 mm
- 2 layers110 × 80 mm
Noko 2
NikolaiRadke/Noko_2
The do-it-yourself Arduino-based Noko monster. Version 2 with PCB and 3D printed casing.
51 parts3Apache-2.0 - 2 layers150 × 100 mm
Maze kiCad
billtsol/Maze
This project demonstrates how to use an Arduino board, IR sensors, and a motor driver shield to create a maze-solving robot.
39 parts2 - 2 layers111.5 × 102 mm
Wall e
c-lydia/ESP-ROS2
A tiny robot with IMU (MPU5060) and an ultrasonic sensor (HC-SR04), running on micro-ROS, communicating over UDP.
12 parts2Apache-2.0 - 2 layers25.2 × 27.3 mm
Cf2-hcsr04
dbrgn/crazyflie2-hcsr04
Ultrasonic sensor (HC-SR04) extension board for the Crazyflie 2.0
9 parts2 - 2 layers
Aegis
YousefAliAicha/aegis-embedded-system
Networked rotating ultrasonic radar system built on the Deneyap Kart 1A (ESP32-S3), with a real-time web dashboard served directly from the board.
9 parts2MIT - 2 layers170.2 × 119.4 mm
Sentinel
YousefAliAicha/sentinel-arduino-firmware
Adaptive traffic-light FSM on the Arduino UNO R3 — pedestrian preemption, LDR-gated night mode with HC-SR04 vehicle detection, and a multiplexed 7-segment countdown. Fully non-blocking.
25 parts2MIT
Questions
What parts does the Comedouro PCB use?
19 parts, built around the HC-SR04. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Comedouro PCB KiCad files?
From the UTFPR-DispositivosMoveis/ddm_comedouro repository on GitHub, at the commit this page was made from: the board is MCU/Comedouro_PCB/Comedouro_PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Comedouro PCB design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).