Skip to the content
2 layers140.5 × 70 mmAmbiSense, the printed circuit board in 3D

A portable environment sensor to sense ambient temperature, humidity, light, movement speed, and more!

Size
140.5 × 70 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
66
Pads
223
Tracks, vias
424, 69
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
8 Oct 2026
Updated
17 Oct 2026

Overview

AmbiSense is an open-source printed circuit board by TwoCoolCole12, from the TwoCoolCole12/Half-Life-Week-1-PCB-AmbiSense repository on GitHub. It is a 2-layer board of 140.5 × 70 mm with 37 parts on 66 nets, routed with 424 tracks and 69 vias.

It is built around the ESP32-S3-MINI-1-N8, BMP384 and TPS63802DLAR, with the BQ24074RGTR, SHT31-DIS-F and PDV-P8103 among its other parts. Its parts include 15 resistors, 8 capacitors, 5 ICs, 4 switches and 2 connectors. It belongs with the ESP32 boards of this library.

Main components

8

README

README.md

AmbiSense

A portable environment sensor to sense ambient temperature, humidity, light, movement speed, and more!

Inspired by features on the Starbie, but extended for functionality and development time.

Living in a place where the climate constantly fluctuates, it can be handy to glance at a small device that's not a phone to see what's happening in the air around oneself.

Screenshot 2026-10-10 183336

Here's some of the planned features:

  • Temperature Sensor
  • Humidity Sensor
  • Battery Powered or Rechargeability
  • OLED Display
  • Navigation Buttons
  • Power/Charging Indicator
  • Ambient Light Level Monitor
  • Audio Sensor

Checks does not mean it's programmed, just accounted for and wired.

With enough work, it might be reasonable to add in these features too, but they are lower priority:

  • Wi-Fi Connection
  • Bluetooth Compatiblitiy
  • Access to Weather Forcasts
  • Push Notifications when Major Changes Occue
  • Charging & Battery Info
  • CO2 Sensor
  • Barometric Pressure Sensor
  • Built in Clock
  • Movement Sensor
image

Hardware Specifications WIP

Parts

37
QtyValueFootprintReferences
510kWeek 1 Parts:Res10kOR5, R7, R11, R12, R13
410µFWeek 1 Parts:Cap10UFC1, C2, C3, C5
4SW_PushWeek 1 Parts:SW4_1825910-B_TECSW1, SW2, SW3, SW4
3100nFWeek 1 Parts:Cap100nFC4, C7, C8
24.7kΩWeek 1 Parts:Res4.7kOR14, R15
25.1KWeek 1 Parts:Res5.1kOR3, R4
10.47 µHWeek 1 Parts:INDC2520X120NL1
11.8kWeek 1 Parts:Res1.8kOR6
1100KWeek 1 Parts:Res100kOR2
122µFWeek 1 Parts:Cap22UFC6
13kWeek 1 Parts:Res3kOR8
1511kWeek 1 Parts:Res511kOR9
191kWeek 1 Parts:Res91kOR10
1BMP384Week 1 Parts:LGA10_2.0X2.0X0.95_BOSU5
1BQ24074RGTPackage_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mmU3
1ESP32-S3-MINI-1-N8Week 1 Parts:XCVR_ESP32-S3-MINI-1-N8U1
1PDV-P8103Week 1 Parts:PHODET_PDV-P8103R1
1SHT31-DISWeek 1 Parts:U_SHT3_SENU2
1SM02B-SRSS-TB LFSNWeek 1 Parts:CONN_SM02B-SRSS-TB_JSTJ2
1SPH0655LM4H-1Week 1 Parts:SPH0655LM4H-1_KNOMIC1
1TPS63802DLARWeek 1 Parts:VREG_TPS63802DLARU4
1USB4105-GF-AWeek 1 Parts:USB4105_GCTJ1
1WEA012864DWPP3N00003Week 1 Parts:WEA012864DWPP3N00003DS1

Similar boards

  • 4 layers56 × 52 mmEdgeLink S3 Cellular, the printed circuit board in 3D

    EdgeLink S3 Cellular

    CDonohoe-Designs/EdgeLink_S3_Cellular

    EdgeLink S3 Cellular is a four-layer embedded hardware platform combining an ESP32-S3 controller, SIM7080G cellular/GNSS modem, USB-C, battery power management and environmental/motion sensing.

    114 parts
  • 2 layers63.5 × 78.7 mmProject 06, the printed circuit board in 3D

    Project 06

    lucadaloia/MSP430-LDR_ECE492

    This project involved the design and manufacturing of a microcontroller-based system focused on analog signal acquisition and real-time user interaction.

    61 partsMIT
  • 4 layers78 × 89 mmZbook, the printed circuit board in 3D

    Zbook

    VinnieT1/zbook

    170 parts
  • 4 layers81 × 37 mmMaidenhead pocket locator, the printed circuit board in 3D

    Maidenhead pocket locator

    EdmundLimBoEn/gps-maidenhead-device

    Open-source portable GNSS Maidenhead grid locator with a 16x2 LCD

    117 parts
  • 2 layers61.5 × 126.8 mmBadge eda, the printed circuit board in 3D

    Badge eda

    theparanoids/keyhole-badge

    The Paranoids have designed a sound-reactive LED electronic conference badge for DEFCON 2022. This repository contains the PCB design files for the badge and the source code to the firmware that runs on the…

    88 parts7
  • 2 layers29.2 × 18.3 mmBat IMU nRF5340, the printed circuit board in 3D

    Bat IMU nRF5340

    BigBroBob2/bat_tag_nrf5340dk

    A custom-designed device to record free-flying bat kinematics, echos, and eye movement

    21 parts
  • 2 layers130 × 70.1 mmSenseU Microphoneboard, the printed circuit board in 3D

    SenseU Microphoneboard

    dersian/embeddedBikeSafety

    EBS is an Embedded solution protecting a cyclist from vehicles by detecting approaching vehicles using microphones and machine learning.

    37 parts2

Questions

How big is the AmbiSense PCB?

It measures 140.5 × 70 mm and has 2 copper layers, 1.6 mm thick.

What parts does the AmbiSense use?

37 parts, built around the ESP32-S3-MINI-1-N8, BMP384, TPS63802DLAR and BQ24074RGTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AmbiSense KiCad files?

From the TwoCoolCole12/Half-Life-Week-1-PCB-AmbiSense repository on GitHub, at the commit this page was made from: the board is AmbiSense.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the AmbiSense design in my own project?

Its repository states no licence, so its author keeps all rights: ask TwoCoolCole12 before reusing the design.