Skip to the content
2 layers76.2 × 96.7 mmUnOrthoDox 20 PCB, the printed circuit board in 3D

UnOrthoDox 20 PCB

TweetyDaBird/UnOrthoDox1

A 'simple' 17-20 key Numpad

Size
76.2 × 96.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
70
Nets
61
Pads
306
Tracks, vias
423, 71
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
23 Apr 2023
Updated
11 Jul 2023

Overview

UnOrthoDox 20 PCB is an open-source printed circuit board by TweetyDaBird, from the TweetyDaBird/UnOrthoDox repository on GitHub. It is a 2-layer board of 76.2 × 96.7 mm with 70 parts on 61 nets, routed with 423 tracks and 71 vias.

It is built around the SN74LV1T34DBV, 1N4148W and SK6812MINI-E, with the RP2040-ZERO among its other parts. Its parts include 20 diodes, 20 switches, 4 capacitors and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.

Main components

4

README

README.md
Render UnOrthoDox 17Render UnOrthoDoc 20Render UnOrthoDoc Rear
Render UnOrthoDox Front PlateRender UnOrthoDox Rear Plate

UnOrthoDox

A 'simple' and low cost hot-swap Numpad (available in 17-18 or 20 key versions) with support for dual encoders, and using a low cost but powerfull controller (RP2040-Zero). The design is dual sided, so flipping it over and building it as a 'SouthPaw' configuration is outright easy. A single plate/case design with cut-outs for all key configurations available in Black or White makes it easy to build a complete Numpad that fit's in well witha 60% keyboard in size and looks. The same plates/components fit both the 20-key PCB variant and the PCB-variant for a 17-18 key classic numpad layout.

The name comes from the slightly unortodox placement of the controller straddling the hot-swap socket, with not all pins soldered, and the fact that it can be built as a 20-key ortholinear macro pad.

  • Full Sandwich Case design
  • Low cost/Simple to build
  • Powerful and Flexible MCU
  • Compatible with QMK/Vial and ZMK firmware
  • Reversible for SouthPaw's
  • Dual Rotary Encoders
  • Per-Key RGB
  • Build instructions are printed on the backplate for an easy build.

Parts

70
QtyValueFootprintReferences
201N4148WDiode_SMD:D_SOD-123D1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4
20SK6812MINI-EKeyboard RGB:RGB_SK6812MINI-ERGB1, RGB2, RGB3, RGB4, RGB5, RGB10, RGB11, RGB12, RGB13, RGB14, RGB15, RGB16, RGB17, RGB18, RGB19, RGB20 +4
20SW_MX_HotSwapKeyboard Switches:SW_MX_HotSwapSW1, SW2, SW3, SW4, SW5, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20 +4
4C_SmallCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2, C3, C4
2Rotary_Encoder_ClickKeyboard Encoders:Encoder_Alps_EC11E_SmallENC1, ENC2
1CC-BY-SA-4.0Logotypes:CC_BY_SA_40_lineLogo1
1QMK_LogoLogotypes:Powered_by_QMKLogo2
1RP2040-ZeroKeyboard Controllers:RP2040-Zero_reverse_mount_flipped_less_pinsRZ1
1SN74LV1T34DBVPackage_TO_SOT_SMD:SOT-23-5U1

More from TweetyDaBird/UnOrthoDox

1
  • 2 layers76.2 × 96.7 mmUnOrthoDox 17 PCB, the printed circuit board in 3D

    UnOrthoDox 17 PCB

    TweetyDaBird/UnOrthoDox

    A 'simple' 17-20 key Numpad

    69 parts1

Similar boards

  • 2 layers226 × 92 mmChameleon v1 0, the printed circuit board in 3D

    Chameleon v1 0

    TweetyDaBird/Fat-Chameleon

    A Grid Ortho keyboard for BM40, JJ40/JJ50 cases inspired by Planck and Preonic

    205 parts14CC-BY-SA-4.0
  • 2 layers225.5 × 93 mmSkinny Chameleon, the printed circuit board in 3D

    Skinny Chameleon

    TweetyDaBird/Skinny-Chameleon

    The Skinny Chameleon is a grid type orthogonal keyboard made to be a direct drop-in for the Preonic's and Planck's PCB's.

    201 parts3
  • 2 layers76.6 × 81.5 mmCosmodocks, the printed circuit board in 3D

    Cosmodocks

    holeminhnhat3101/Cosmos-docks

    Cosmos-docks is a custom hackpad created by me. It includes a custom PCB, a fully 3D-printable case, one rotary encoder, an OLED display, and SK6812MINI-E addressable RGB LEDs.

    60 partsMIT
  • 2 layers100 × 116 mmCustom macropad, the printed circuit board in 3D

    Custom macropad

    hossainmahmudchowdhury-boop/20-key-macropad

    A small 20-key MacroPad built around the Seeeduino XIAO microcontroller. It has a custom circuit board. The MacroPad has 20 keys in a 4×5 grid.

    115 parts
  • 2 layers285 × 94.6 mmGökunge, the printed circuit board in 3D

    Gökunge

    TweetyDaBird/Gokunge

    274 parts
  • 2 layers133.4 × 117.1 mmRefleXion X65, the printed circuit board in 3D

    RefleXion X65

    TweetyDaBird/RefleXion-65

    Ortho Split Keyboard

    176 parts
  • 2 layers133.4 × 102 mmRefleXion Grid, the printed circuit board in 3D

    RefleXion Grid

    TweetyDaBird/RefleXion-Grid

    Minimal footprint Split Ortho Keyboard with RP2040 MCU and USB link

    185 parts
  • 2 layers160 × 105.5 mmSenwegetv2, the printed circuit board in 3D

    Senwegetv2

    UnfadingSoul97/Senweget

    A split Corne Keyboard that doubles as a stenograph

    66 parts

Questions

How big is the UnOrthoDox 20 PCB PCB?

It measures 76.2 × 96.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the UnOrthoDox 20 PCB use?

70 parts, built around the SN74LV1T34DBV, 1N4148W, SK6812MINI-E and RP2040-ZERO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the UnOrthoDox 20 PCB KiCad files?

From the TweetyDaBird/UnOrthoDox repository on GitHub, at the commit this page was made from: the board is UnOrthoDox 20 PCB/UnOrthoDox 20 PCB.kicad_pcb and its schematic UnOrthoDox 17 PCB/UnOrthoDox 17 PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the UnOrthoDox 20 PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask TweetyDaBird before reusing the design.