
Chameleon v1 0
TweetyDaBird/Fat-Chameleon
A Grid Ortho keyboard for BM40, JJ40/JJ50 cases inspired by Planck and Preonic

Cosmos-docks is a custom hackpad created by me. It includes a custom PCB, a fully 3D-printable case, one rotary encoder, an OLED display, and SK6812MINI-E addressable RGB LEDs. The design is built around the Seeed XIAO RP2040 and uses QMK firmware.
Cosmodocks is an open-source printed circuit board by holeminhnhat3101, from the holeminhnhat3101/Cosmos-docks repository on GitHub, published under the MIT licence. It is a 2-layer board of 76.6 × 81.5 mm with 60 parts on 41 nets, routed with 370 tracks and 61 vias.
It is built around the SN74LV1T34DBV, SK6812MINI-E and 1N4148W. Its parts include 22 diodes, 15 capacitors, 10 switches, 5 resistors and 2 ICs. It belongs with the lEDs and displays and keyboards and input boards of this library.
Cosmos Docks is a custom 9-key macropad designed from scratch for Hack Club Stardance. It includes a custom PCB, a fully 3D-printable case, one rotary encoder, an OLED display, and SK6812MINI-E addressable RGB LEDs.
The design is built around the Seeed XIAO RP2040 and uses QMK firmware.




| Component | Quantity | Notes |
|---|---|---|
| Seeed XIAO RP2040 | 1 | Main microcontroller |
| MX-style mechanical switches | 9 | Main key switches |
| Blank DSA keycaps | 9 | Keycaps for the switches |
| 1N4148W SMD diodes | 9 | One diode per switch |
| EC11 rotary encoder | 1 | 20 mm D-shaft rotary encoder |
| 0.91 inch 128×32 I2C OLED display | 1 | OLED screen connected through I2C |
| JST-SH 4-pin connector | 1 | QWIIC/I2C OLED connector, SM04B-SRSS-TB, 1.00 mm pitch, horizontal |
| SK6812MINI-E RGB LEDs | 13 | Addressable RGB LEDs |
| 0.1 µF capacitors | 13 | One decoupling capacitor per RGB LED |
| 10 nF capacitors | 2 | Rotary encoder debounce/filtering capacitors |
| SN74LV1T34DBV level shifter | 1 | Shifts LED data from 3.3 V to 5 V |
| 330 Ω resistor | 1 | LED data line resistor |
| 10 kΩ resistors | 4 | Rotary encoder pull-up/pull-down resistors |
| M3×16 mm screws | 4 | Used to connect the top and bottom case |
| M3 heat-set inserts | 4 | Installed into the 3D-printed case |
| Custom PCB | 1 | 2-layer PCB designed in KiCad |
| 3D-printed top case | 1 | Top enclosure / switch plate |
| 3D-printed bottom case | 1 | Bottom enclosure |
| Soldering equipment | 1 | I don't have one |
The firmware is written using QMK. It includes support for:
The compiled firmware file is included in the production folder as:
firmware.uf2
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C7, C8, C9, C10, C11, C12, C13, C14, C15 |
| 13 | SK6812MINI-E | LED_SMD:LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10, LED11, LED12, LED13 |
| 9 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 9 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R5 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | 10nF | Capacitor_SMD:C_0603_1608Metric | C1, C6 |
| 1 | 330R | Capacitor_SMD:C_0603_1608Metric | R1 |
| 1 | Conn_01x04 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1 |
| 1 | LOGO | Logos:cosmo_docks_logo | G*** |
| 1 | MOUDLE-SEEEDUINO-XIAO | footprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U2 |
| 1 | RotaryEncoder | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW10 |
| 1 | SN74LV1T34DBV | Package_TO_SOT_SMD:SOT-23-5 | U1 |

TweetyDaBird/Fat-Chameleon
A Grid Ortho keyboard for BM40, JJ40/JJ50 cases inspired by Planck and Preonic

TweetyDaBird/Skinny-Chameleon
The Skinny Chameleon is a grid type orthogonal keyboard made to be a direct drop-in for the Preonic's and Planck's PCB's.


hossainmahmudchowdhury-boop/20-key-macropad
A small 20-key MacroPad built around the Seeeduino XIAO microcontroller. It has a custom circuit board. The MacroPad has 20 keys in a 4×5 grid.



TweetyDaBird/RefleXion-Grid
Minimal footprint Split Ortho Keyboard with RP2040 MCU and USB link

It measures 76.6 × 81.5 mm and has 2 copper layers, 1.6 mm thick.
60 parts, built around the SN74LV1T34DBV, SK6812MINI-E and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the holeminhnhat3101/Cosmos-docks repository on GitHub, at the commit this page was made from: the board is PCB/cosmodocks.kicad_pcb and its schematic PCB/cosmodocks.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).