
SmartTherm
Strooom/SmartTherm
Controlling a Junkers heating (Eurostar ZWE24) with an IoT thermostat

"Ten minute transmitter" KiCAD demo
Kicad demo is an open-source printed circuit board by Tjoppen, from the Tjoppen/kicad_demo repository on GitHub. It is a 2-layer board of 100 × 50 mm with 39 parts on 8 nets, routed with 143 tracks and 0 vias.
It is built around the BC546. Its parts include 14 capacitors, 3 transistors, 3 inductors, 2 connectors and 1 resistor. It belongs with the radio and wireless boards of this library.
A small KiCAD demo for SK2AT
Implements the Ten Minute Transmitter for the 40 meter band plus a 5-pole low-pass filter. The filter cuts the 2nd harmonic by 30 dB and the 3rd by 46 dB.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | TEST_1P | Pin_Headers:Pin_Header_Straight_1x01 | W1, W2, W3, W4, W5, W6, W7, W8, W9, W10 |
| 3 | 100p | Resistors_Universal:Resistor_SMD+THTuniversal_0805to1206_RM10_HandSoldering | C3, C4, C5 |
| 3 | 60p | Resistors_Universal:Resistor_SMD+THTuniversal_0805to1206_RM10_HandSoldering | C7, C10, C13 |
| 3 | BC546 | TO_SOT_Packages_THT:TO-92_Molded_Wide | Q1, Q2, Q3 |
| 2 | 1.75uH | PROJECT:1u75_coil | L2, L3 |
| 2 | 10nF | Resistors_Universal:Resistor_SMD+THTuniversal_0805to1206_RM10_HandSoldering | C1, C2 |
| 2 | 200p | Resistors_Universal:Resistor_SMD+THTuniversal_0805to1206_RM10_HandSoldering | C6, C12 |
| 2 | 7p | Resistors_Universal:Resistor_SMD+THTuniversal_0805to1206_RM10_HandSoldering | C8, C14 |
| 1 | 100uH | Choke_Axial_ThroughHole:Choke_Horizontal_RM20mm | L1 |
| 1 | 22k | Resistors_Universal:Resistor_SMD+THTuniversal_0805to1206_RM10_HandSoldering | R1 |
| 1 | 5p | Resistors_Universal:Resistor_SMD+THTuniversal_0805to1206_RM10_HandSoldering | C11 |
| 1 | 7020 kHz | Crystals:HC-49V | Y1 |
| 1 | 800p | Resistors_Universal:Resistor_SMD+THTuniversal_0805to1206_RM10_HandSoldering | C9 |
| 1 | Antenna | Pin_Headers:Pin_Header_Straight_1x01 | AE1 |
| 1 | key | Buttons_Switches_ThroughHole:SW_PUSH_6mm | P2 |
| 1 | pwr | Pin_Headers:Pin_Header_Straight_1x02 | P1 |
The 35 most common of 39 parts.

Strooom/SmartTherm
Controlling a Junkers heating (Eurostar ZWE24) with an IoT thermostat



bildschirmtext/rpi-dbt03
Hardware, Software and Firmware for a Raspberry Pi to DBT-03 adapter

bigbass1997/PICTAS
Low-cost replay device for playing back Tool Assisted Speedruns on real hardware

Wesemane-Industries/808-kick-eurorack
808 kick (bass drum) for eurorack / modular synth

m0xpd/EUCLIDplus
EUCLID+ is a Clock Divider, Oscillator and Rhythm Sequencer for electronic music applications

m0xpd/FLIP
A Bernoulli Gate for Electronic Music Applications, realised in Hardware
It measures 100 × 50 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the BC546. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tjoppen/kicad_demo repository on GitHub, at the commit this page was made from: the board is kicad_demo.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Tjoppen before reusing the design.