TimoWey/PM3-Cable_MonitorProjekt Modul 3 - Cable Monitor
Cable Monitor is an open-source printed circuit board by TimoWey, from the TimoWey/PM3-Cable_Monitor repository on GitHub. It is a 2-layer board of 63.5 × 118.1 mm with 101 parts on 94 nets, routed with 545 tracks and 43 vias.
It is built around the LD1117S33TR(MS), SIP32508DT and SS13L R3G, with the BSS316N among its other parts. Its parts include 26 resistors, 24 capacitors, 7 ICs, 6 diodes and 3 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C8, C9, C17, C18, C23, C24 |
| 6 | GND | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP1, TP2, TP3, TP4, TP5, TP6 |
| 5 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C19, C20, C21, C22 |
| 4 | 18k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R18, R25, R26 |
| 4 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R21, R23 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 4 | SS13L_R3G | SS13L_R3G:SODFL3618X143N | D1, D2, D3, D4 |
| 3 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R19, R20 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11, C16 |
| 3 | 100uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C4, C5 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R4 |
| 3 | MCP6002-xSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5, U6, U7 |
| 2 | 18nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C14 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22, R24 |
| 2 | 330nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C15 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12 |
| 2 | 560k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R16 |
| 2 | 62 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8 |
| 2 | 7.5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R14 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | HS_Left, HS_right |
| 2 | DRV5053_THT | HW_template:TO-92Flat_wide | U3, U4 |
| 2 | LEDred_3mm | LED_THT:LED_D3.0mm | LED1, LED2 |
| 2 | type="R" model="Conn_01x32_Female" lib="" | Connector_PinSocket_2.54mm:PinSocket_1x32_P2.54mm_Vertical | P1, P2 |
| 1 | 220nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 30k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 3V | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP14 |
| 1 | 4.7uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 43k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 5V | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP11 |
| 1 | BSS316N | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_D14mm_H7mm_P10mm | BZ1 |
| 1 | HS_left_VGND | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP21 |
| 1 | HS_left_in | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP15 |
| 1 | HS_left_out | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP17 |
| 1 | HS_right_VGND | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP22 |
| 1 | HS_right_in | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP16 |
| 1 | HS_right_out | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP18 |
| 1 | LD1117S33TR | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | On / Off Button | Button_Switch_SMD:SW_SPST_PTS645 | SW1 |
| 1 | PWM_Buzzer | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP7 |
| 1 | SiP32508 | Package_TO_SOT_SMD:TSOT-23-6_HandSoldering | U1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J1 |
| 1 | VGND | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP8 |
| 1 | pad_left_in | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP9 |
| 1 | pad_left_out | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP12 |
| 1 | pad_left_sf | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP19 |
| 1 | pad_right_in | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP10 |
| 1 | pad_right_out | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP13 |
| 1 | pad_right_sf | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP20 |
DennisRathgeb/doppler-radar-detector
24 GHz CW Doppler + FMCW radar detector: STM32F429 + ESP32 + TouchGFX live UI, CMSIS-DSP FFT, FastAPI backend, YOLOv8 angle-of-arrival sensor fusion desktop app. ZHAW PM4 team project.
JQIamo/AOD_protector
The protection circuit for the acousto-optic deflectors used for tweezers
It measures 63.5 × 118.1 mm and has 2 copper layers, 1.6 mm thick.
101 parts, built around the LD1117S33TR(MS), SIP32508DT, SS13L R3G and BSS316N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TimoWey/PM3-Cable_Monitor repository on GitHub, at the commit this page was made from: the board is PCB Design/Manufacturing Data/Cable_Monitor.kicad_pcb and its schematic PCB Design/Cable_Monitor/Cable_Monitor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask TimoWey before reusing the design.