TheRegularDX/DX32G1New DX32 board, now with an oled display and serial usb adapter
DX32G is an open-source printed circuit board by TheRegularDX, from the TheRegularDX/DX32G repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 53.3 × 45.7 mm with 34 parts on 54 nets, routed with 324 tracks and 40 vias.
It is built around the ESP32-S3-WROOM-1-N8, CH340N and AMS1117-3.3, with the WS2812B among its other parts. Its parts include 5 capacitors, 5 resistors, 5 connectors, 4 ICs and 4 diodes. It belongs with the lEDs and displays and interfaces and adapters boards and the ESP32 boards of this library.
ESP32S3 based board with built in USB to serial adapter, micro SD card reader, and I2C OLED connection.
Supports Arduino IDE, PlattformIO and CircuitPython.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C5 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5 |
| 4 | MountingHole_2.2mm_M2_DIN965 | MountingHole:MountingHole_2.2mm_M2_DIN965 | HOLE, hole2, hole3, hole4 |
| 3 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3 |
| 3 | LOGO | LOGO | Flag, logo, OSH |
| 2 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1, J7 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BOOT | TestPoint:TestPoint_Pad_1.5x1.5mm | BOOT |
| 1 | CH340N | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | LEFT | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J4 |
| 1 | MicroSD Card | 112J-TDAR-R01:112J-TDAR-R01 | J2 |
| 1 | RESET | TestPoint:TestPoint_Pad_1.5x1.5mm | RESET |
| 1 | RIGHT | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J3 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D4 |
| 1 | boot | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | reset | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | ~ | Custom_Symbols:SSD1306_OLED | U4 |
Tomas-Kuchta-FPV/Open-ESPilot
An open-source project to develop a custom ESP32-based flight controller designed primarily for use with ArduPilot. Focused on affordability, flexibility, and ease of integration with various robotic and UAV platforms.
RoboticsBrno/Robutek
Robůtek je robotická platforma založená na čipu ESP32-S3. Je velice rozšitiřelný, ale ze základu umí jezdit, kreslit fixou, jezdit po čáře, pohybovat se bludištěm. Programování je přes Jaculus.
LesKaribous/Karibous-2024-PAMI
Hardware pour les Petits Automates Mobiles Indépendants de la Coupe de France de Robotique 2024
fehlfarbe/ESP32-Alarm-clock
This is an ESP32 based alarm clock that plays mp3 files from SD, webstreams or even FM radio. You can configure multiple alarms and add new songs to your sd card with a simple webinterface.
shubhisgonnastealyourcode/FT-32-esp32-s3-dev-board-
Custom ESP32-S3 Development Board with Header Pins for Display and RGB LED
aditgoyal5/Forward_Ignition_PCB
This repository is about a printed circuit board I built for Team Sammard.
It measures 53.3 × 45.7 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the ESP32-S3-WROOM-1-N8, CH340N, AMS1117-3.3 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TheRegularDX/DX32G repository on GitHub, at the commit this page was made from: the board is DX32G.kicad_pcb and its schematic DX32G.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).