

GamingController
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 85
- Nets
- 160
- Pads
- 510
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Aug 2025
- Updated
- 7 Aug 2025
Overview
GamingController is an open-source printed circuit board by TenmaUchiyama, from the TenmaUchiyama/STM32F401RE_GameController repository on GitHub. It is a 2-layer board with 85 parts on 160 nets.
It is built around the BMD-330-A-R, TVS0500DRV and USBLC6-2P6, with the IN-S66TBTRGB among its other parts. Its parts include 34 capacitors, 23 resistors, 14 switches, 5 ICs and 5 connectors. It belongs with the STM32 boards of this library.
Main components
4BMD-330-A-R
SMD-47PSMD-47P Bluetooth Modules ROHSu-bloxBluetooth ModulesTVS0500DRV
WSON-6(2x2)-40℃~+125℃ 155pF 400W@8/20us 43A@8/20us 5V 7.9V 70pA 9.2V IEC 61000-4-2、IEC 61000-4-5 TVS Unidirectional WSON-6(2x2) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)USBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)IN-S66TBTRGB
SMD-4P,1.6x1.5mm-30℃~+85℃ 0.55mm 1.5mm 1.6mm 120° B:115mcd、R:180mcd、G:450mcd B:471nm、G:530nm、R:630nm Common Anode R:2.2V~2.6V、G:3.2V~3.6V、B:3.2V~3.6V R:20mA、G:20mA、B:20mA R:630nm、G:530nm、B:471nm R:75mW、B:75mW、G:75mW Water Clear SMD-4P,1.6x1.5mm RGB LEDs ROHSInoluxRGB LEDs
Parts
85| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 100n | Capacitor_SMD:C_0201_0603Metric | C2, C12, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28 +4 |
| 12 | DTS-63N-V | TactSwitch:DTS63NV | S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S13, S14 |
| 10 | 56k | Resistor_SMD:R_0201_0603Metric | R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 5 | 100nF | Capacitor_SMD:C_0201_0603Metric | C6, C7, C8, C10, C11 |
| 3 | 1u | Capacitor_SMD:C_0201_0603Metric | C30, C31, C32 |
| 2 | 10k | Resistor_SMD:R_0201_0603Metric | R5, R6 |
| 2 | 1u_X5R_0603 | Capacitor_SMD:C_0201_0603Metric | C1, C4 |
| 2 | 270 | Resistor_SMD:R_0201_0603Metric | R20, R23 |
| 2 | 330 | Resistor_SMD:R_0201_0603Metric | R4, R21 |
| 2 | 470 | Resistor_SMD:R_0201_0603Metric | R19, R22 |
| 2 | 5k1 | Resistor_SMD:R_0201_0603Metric | R1, R2 |
| 2 | Conn_01x05_Socket | Connector_PinSocket_2.00mm:PinSocket_1x05_P2.00mm_Horizontal | J2, J3 |
| 2 | IN-S66TBTRGB | RGB_LED:INS66TBTRGB | LED1, LED2 |
| 2 | RKJXV122400R_R | Thumbstick_RKJXV122400R:RKJXV122400R | S1, S2 |
| 1 | 10k | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R18 |
| 1 | 10nF_X7R_0603 | Capacitor_SMD:C_0201_0603Metric | C3 |
| 1 | 1uC | Capacitor_SMD:C_0201_0603Metric | C13 |
| 1 | 1uF | Capacitor_SMD:C_0201_0603Metric | C9 |
| 1 | 2k | Resistor_SMD:R_0201_0603Metric | R3 |
| 1 | 4.7u | Capacitor_SMD:C_0201_0603Metric | C14 |
| 1 | 56k | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R17 |
| 1 | BMD-330-A-R | BD330:BMD330AR | IC1 |
| 1 | Conn_01x09_Socket_LCD | Connector_PinSocket_1.27mm:PinSocket_1x09_P1.27mm_Vertical | J5 |
| 1 | ECS-2520MV-xxx-xx | Oscillator:Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm | Y1 |
| 1 | FFC ADAPTER | FFCAdapter:0781271220 | J4_TPAD |
| 1 | LD3985M33R_SOT23 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | LED | LED_SMD:LED_0201_0603Metric | D1 |
| 1 | STM32F401RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U4 |
| 1 | TVS0500DRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U2 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_JAE_DX07S016JA1R1500 | J1 |
Similar boards
- 4 layers57.9 × 65.7 mm

- 4 layers100 × 100 mm

IMUnav H00
marouncz/IMU-navigation
This is a repository for my bachelor's thesis regarding IMU navigation
220 parts1MIT - 4 layers44.3 × 39 mm

Gmax4002-breakout
will127534/gmax4002-breakout
A basic minimum GMAX4002 breakout board for Raspberry Pi
142 parts12MIT - 2 layers50.8 × 22.9 mm

- 2 layers120 × 100 mm

Enose PCB
Tobias66662/Bachelor-Project-PCB-Designs
PCB to be used in the Enose (for Bachelor Project)
157 parts1 - 2 layers

- 2 layers52 × 50.5 mm

- 2 layers362 × 121 mm

Questions
What parts does the GamingController use?
85 parts, built around the BMD-330-A-R, TVS0500DRV, USBLC6-2P6 and IN-S66TBTRGB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GamingController KiCad files?
From the TenmaUchiyama/STM32F401RE_GameController repository on GitHub, at the commit this page was made from: the board is GamingController/GamingController.kicad_pcb and its schematic GamingController/GamingController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the GamingController design in my own project?
Its repository states no licence, so its author keeps all rights: ask TenmaUchiyama before reusing the design.