Skip to the content
2 layers362 × 121 mmKeyboard, the printed circuit board in 3D

My Mechanical key board

Size
362 × 121 mm
Copper layers
2
Thickness
1.6 mm
Parts
171
Nets
122
Pads
690
Tracks, vias
1,250, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 Dec 2025
Updated
31 Mar 2026

Overview

Keyboard is an open-source printed circuit board by FazalThe, from the FazalThe/Keyboard-by-Fazal repository on GitHub. It is a 2-layer board of 362 × 121 mm with 171 parts on 122 nets, routed with 1,250 tracks and 0 vias.

It is built around the TVS0500DRV. Its parts include 80 diodes, 79 switches, 3 resistors, 2 ICs and 2 connectors. It belongs with the keyboards and input and lEDs and displays boards and the RP2040 boards of this library.

Main components

1

README

README.md

Custom Wireless Mechanical Keyboard (Pico W)

Alt text

A custom-designed wireless mechanical keyboard built around the Raspberry Pi Pico W, featuring a hand-wired key matrix, rotary encoders, OLED display, rechargeable battery support, and a fully custom 3D-printed case.

The Layout is custome made by me


📸 Project Overview

Top Plate

Case Top

Case (Bottom Shell)

Case Top

Key Layout

Layout

Electrical Schematic

Schematic


🧩 Bill of Materials

Core Electronics

  • Raspberry Pi Pico W ×1
  • Mechanical key switches ×78
  • Keyboard diodes ×81
  • SK6812 MINI RGB LEDs ×7
  • Rotary encoders ×2
  • 0.91″ OLED display ×1
  • MCP73831 Li-ion charger ×1
  • TVS ESD protection IC ×1
  • Fuse (500 mA) ×1
  • Resistors (4.7 kΩ ×2, 2 kΩ ×1)

Power & Connectivity

  • Protected Li-Po battery ×1
  • JST 2-pin battery connector ×1
  • USB connector / header ×1
  • SS12F15 slide switch ×1

Mechanical & Assembly

  • MX keycaps ×78 (look layout for reference)
  • Rotary encoder caps ×2
  • Copper wire (for hand wiring)
  • Solder board / perfboard
  • M3 × 20 mm screws ×8
  • M3 heat-set inserts ×8

Parts

171
QtyValueFootprintReferences
80D_SmallDiode_SMD:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +64
78SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +62
24.7kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
2RotaryEncoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmEC1, EC2
11N5817Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalDS0
12kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
1500 mAFuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolderF1
1Conn_01x02_PinConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ2
1Conn_01x04_PinConnector_PinSocket_1.00mm:PinSocket_1x04_P1.00mm_Vertical_SMD_Pin1RightJ1
1MCP73831-2-OTPackage_TO_SOT_SMD:SOT-23-5U1
1RaspberryPi_Pico_WModule:RaspberryPi_Pico_W_SMD_HandSolderA1
1SW_SPDTButton_Switch_SMD:SW_SPDT_PCM12SW80
1TVS0500DRVPackage_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mmU2

Similar boards

  • 4 layers44.3 × 39 mmGmax4002-breakout, the printed circuit board in 3D

    Gmax4002-breakout

    will127534/gmax4002-breakout

    A basic minimum GMAX4002 breakout board for Raspberry Pi

    142 parts12MIT
  • 2 layers50.8 × 22.9 mmFeatherWing 485, the printed circuit board in 3D

    FeatherWing 485

    W8LID/RS-485-FW

    An RS-485 FeatherWing for the Adafruit Feather system.

    22 parts5
  • 4 layers100 × 100 mmIMUnav H00, the printed circuit board in 3D

    IMUnav H00

    marouncz/IMU-navigation

    This is a repository for my bachelor's thesis regarding IMU navigation

    220 parts1MIT
  • 2 layers120 × 100 mmEnose PCB, the printed circuit board in 3D

    Enose PCB

    Tobias66662/Bachelor-Project-PCB-Designs

    PCB to be used in the Enose (for Bachelor Project)

    157 parts1
  • 2 layersDigital waters, the printed circuit board in 3D

    Digital waters

    atop8918/DigitalWaters_WD

    Digital Waters Water Monitoring Device hardware

    20 parts
  • 2 layers52 × 50.5 mmSpoofCIDv2, the printed circuit board in 3D

    SpoofCIDv2

    famez/SpoofCIDv2

    A fork of the SpoofCID project:

    29 partsGPL-3.0
  • 4 layers70 × 50 mmTimekeeper, the printed circuit board in 3D

    Timekeeper

    liam-tirpitz/TickTock

    A custom ESP32-based clock platform driving WS2812B/NeoPixel LED displays. Firmware and PCB are display-agnostic, supporting any addressable LED clock with minimal adjustments.

    57 parts
  • 2 layers55.1 × 62.2 mmStation esp32, the printed circuit board in 3D

    Station esp32

    rabie-ouinten/ESP32-Environmental-Monitoring-Station

    ESP32-based environmental monitoring station measuring temperature, humidity, and light intensity using a DHT11 sensor and an LDR, with an I2C LCD display and a web interface for real-time monitoring and data export.

    40 partsMIT

Questions

How big is the Keyboard PCB?

It measures 362 × 121 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Keyboard use?

171 parts, built around the TVS0500DRV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Keyboard KiCad files?

From the FazalThe/Keyboard-by-Fazal repository on GitHub, at the commit this page was made from: the board is KiCAD/Keyboard.kicad_pcb and its schematic KiCAD/Keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Keyboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask FazalThe before reusing the design.