

ESP32-M2-Module Simple
Various open hardware projects
- Size
- 30 × 42 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 15
- Nets
- 50
- Pads
- 147
- Tracks, vias
- 263, 66
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 Dec 2024
- Updated
- 30 Jul 2026
Overview
ESP32-M2-Module Simple is an open-source printed circuit board by Teknikens-Hus, from the Teknikens-Hus/Open-Hardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 30 × 42 mm with 15 parts on 50 nets, routed with 263 tracks and 66 vias.
It is built around the ESP32-S3-WROOM-1-N8. Its parts include 2 capacitors, 2 resistors, 1 IC, 1 diode and 1 connector. It belongs with the ESP32 boards of this library.
Main components
1README
ESP32-ALED-Controller/README.mdESP32 ALED Controller
A simple addressable LED strip controller based on the ESP32 D1 Mini development board.

Summary
- ESP32 D1 Mini - Main microcontroller board
- SN74AHCT125N - 3.3V to 5V level shifter for LED data signal
- Capacitors - Power filtering capacitors for both 5V and 3.3V rails
- 4 Data outputs - Drive 4 WS2811B or 2 APA102 LED strips (or other clock+data addressable LEDs)
- Separate power input - 5V-24V power input for the LED strips and 5V input for the ESP32 D1 Mini
- Relay output - Control a relay for switching power to the LED strips to reduce power consumption when LEDs are off
- Glas fuse - Protection for the LED input power line (Wise to add a external fuse per LED strip if powering multiple strips)
Pinout
- LED 1 Data - GPIO18
- LED 2 Data - GPIO23
- LED 3 Data - GPIO21
- LED 4 Data - GPIO22
- Relay Control - GPIO13 (V1 GPIO14)
Additional LEDs
The additonal data outputs (2-3) are disabled by default. To enable them, cut the jumper traces on the bottom side of the PCB and bridge it to the opposite side.
Data Resistors
Add data resistors for each data line. 33-200Ω is recommended. For the proper value, check the data line with an oscilloscope and try different resistors to find which provides the best square wave signal.
Revisions
- V1.1 Fix Capacitor placement
- V2 Add spare gpio pin headers
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | LOGO | Graphics:teknikenshus-text-logo | G***, G*** |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | Bus_M.2_Socket_E | M.2:2242-key-E-ESP32 | J4 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | LED_Small | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | TestPoint 3.3v | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | TestPoint EN | TestPoint:TestPoint_Pad_D2.0mm | TP4 |
| 1 | TestPoint GND | TestPoint:TestPoint_Pad_D2.0mm | TP3 |
| 1 | TestPoint IOO | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | TestPoint RXD | TestPoint:TestPoint_Pad_D2.0mm | TP6 |
| 1 | TestPoint TXD | TestPoint:TestPoint_Pad_D2.0mm | TP5 |
More from Teknikens-Hus/Open-Hardware
9- 2 layers10 × 150 mm

- 4 layers100 × 60 mm

- 2 layers

- 2 layers49.3 × 100 mm

- 2 layers40 × 100 mm

- 2 layers70 × 59 mm

- 2 layers68 × 54 mm

- 2 layers75.9 × 41.2 mm

- 2 layers48 × 70.5 mm

Similar boards
- 2 layers85 × 115 mm

OSO BOOK B1
joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.
76 parts8.1kCC-BY-SA-4.0 - 2 layers299 × 82.5 mm

PixelWave
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
663 parts915 - 4 layers56.5 × 99.8 mm

BitaxeGamma
bitaxeorg/bitaxeGamma
Bitaxe based on the BM1370 from the S21 Pro
147 parts432CERN-OHL-S-2.0 - 2 layers129.5 × 50.8 mm

- 4 layers84.5 × 129.5 mm

- 2 layers110 × 115 mm

Esp32 keyboard v0.1
hhuysqt/esp32s3-keyboard
USB/BLE keyboard driver based on ESP32S3-WROOM-1
230 parts168GPL-3.0 - 2 layers35.1 × 36.6 mm

BinNanoFOC
katbinaris/nanofoc_devkit
Compact All-In-One BLDC Controler featuiring ESP32-S3, TMC6300 and Magalpha sensors. Small 35x35mm footprint.
76 parts146 - 2 layers148 × 81 mm

Communicator pcb
Hack-a-Day/2025-Communicator_Badge
The 2025 Hackaday Supercon RF Communicator Badge
58 parts107MIT
Questions
How big is the ESP32-M2-Module Simple PCB?
It measures 30 × 42 mm and has 2 copper layers, 0.8 mm thick.
What parts does the ESP32-M2-Module Simple use?
15 parts, built around the ESP32-S3-WROOM-1-N8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-M2-Module Simple KiCad files?
From the Teknikens-Hus/Open-Hardware repository on GitHub, at the commit this page was made from: the board is ESP32-M2/ESP32-Module/ESP32-M2-Module-Simple/ESP32-M2-Module-Simple.kicad_pcb and its schematic Adafruit AudioFX Breakout/Adafruit AudioFX Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-M2-Module Simple design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).