

AddressableProgressbar
Various open hardware projects
- Size
- 10 × 150 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 51
- Pads
- 195
- Tracks, vias
- 403, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 Dec 2024
- Updated
- 30 Jul 2026
Overview
AddressableProgressbar is an open-source printed circuit board by Teknikens-Hus, from the Teknikens-Hus/Open-Hardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 10 × 150 mm with 50 parts on 51 nets, routed with 403 tracks and 0 vias.
It is built around the WS2812B-2020. Its parts include 48 diodes and 1 connector.
Main components
1README
ESP32-ALED-Controller/README.mdESP32 ALED Controller
A simple addressable LED strip controller based on the ESP32 D1 Mini development board.

Summary
- ESP32 D1 Mini - Main microcontroller board
- SN74AHCT125N - 3.3V to 5V level shifter for LED data signal
- Capacitors - Power filtering capacitors for both 5V and 3.3V rails
- 4 Data outputs - Drive 4 WS2811B or 2 APA102 LED strips (or other clock+data addressable LEDs)
- Separate power input - 5V-24V power input for the LED strips and 5V input for the ESP32 D1 Mini
- Relay output - Control a relay for switching power to the LED strips to reduce power consumption when LEDs are off
- Glas fuse - Protection for the LED input power line (Wise to add a external fuse per LED strip if powering multiple strips)
Pinout
- LED 1 Data - GPIO18
- LED 2 Data - GPIO23
- LED 3 Data - GPIO21
- LED 4 Data - GPIO22
- Relay Control - GPIO13 (V1 GPIO14)
Additional LEDs
The additonal data outputs (2-3) are disabled by default. To enable them, cut the jumper traces on the bottom side of the PCB and bridge it to the opposite side.
Data Resistors
Add data resistors for each data line. 33-200Ω is recommended. For the proper value, check the data line with an oscilloscope and try different resistors to find which provides the best square wave signal.
Revisions
- V1.1 Fix Capacitor placement
- V2 Add spare gpio pin headers
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +32 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | LOGO | Graphics:teknikenshus-text-logo | G*** |
More from Teknikens-Hus/Open-Hardware
9- 4 layers100 × 60 mm

- 2 layers

- 2 layers49.3 × 100 mm

- 2 layers40 × 100 mm

- 2 layers70 × 59 mm

- 2 layers68 × 54 mm

- 2 layers75.9 × 41.2 mm

- 2 layers48 × 70.5 mm

- 2 layers30 × 42 mm

Similar boards
- 4 layers16.9 × 119.4 mm

- 4 layers78 × 59 mm

- 2 layers240 × 240 mm

- 2 layers26 × 28 mm

- 2 layers86 × 54 mm

- 4 layers35 × 85 mm

Vimdrones esc development board
VimDrones/AM32_esc_development_board
Open Source AM32 ESC development board
95 parts44GPL-3.0 - 2 layers31.9 × 36 mm

Lemon pcb swizzle
rianadon/Cosmos-Keyboard-PCBs
Open-Source keyboard PCB designs for the Cosmos Keyboard Generator
63 parts43 - 6 layers155.5 × 194.6 mm

NerdEKO Gamma NoATX
phil31/NerdEKO-Gamma
fork of the NerdOCTAXE-Gamma design (https://github.com/Patsch91/NerdOCTAXE-Gamma), with 12 x BM1370 (14TH/s SHA256)
499 parts42
Questions
How big is the AddressableProgressbar PCB?
It measures 10 × 150 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AddressableProgressbar use?
50 parts, built around the WS2812B-2020. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AddressableProgressbar KiCad files?
From the Teknikens-Hus/Open-Hardware repository on GitHub, at the commit this page was made from: the board is AddressableProgressbar/AddressableProgressbar.kicad_pcb and its schematic Adafruit AudioFX Breakout/Adafruit AudioFX Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AddressableProgressbar design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).