

UFOControlDeck
- Size
- 29.7 × 29.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 104
- Nets
- 142
- Pads
- 423
- Tracks, vias
- 580, 203
- Pours
- 25
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Dec 2020
- Updated
- 28 Oct 2022
Overview
UFOControlDeck is an open-source printed circuit board by Sussex-Invisibles, from the Sussex-Invisibles/UFO repository on GitHub. It is a 4-layer board of 29.7 × 29.7 mm with 104 parts on 142 nets, routed with 580 tracks and 203 vias.
It is built around the ICE40HX8K-BG121, SN74LV1T34DBV and TPSM84209RKHT. Its parts include 48 capacitors, 31 resistors, 12 diodes, 8 ICs and 4 connectors. It belongs with the FPGA and CPLD boards of this library.
Main components
3ICE40HX8K-BG121
CABGA-121-40℃~+100℃ 1.14V~1.26V 131072bit 7680 93 960 iCE40 HX CABGA-121 Programmable Logic Device (CPLDs/FPGAs) ROHSLatticeProgrammable Logic Device (CPLDs/FPGAs)SN74LV1T34DBV
SOT-23-5-40℃~+125℃ 1 1 1.6V~5.5V 10uA 5.5ns@5V,15pF 74LV 8mA 8mA Level shifting Push-pull Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversTPSM84209RKHT
QFN-9(4x4.4)-40℃~+85℃ 1 1.2V~6V 2.5A 4.5V~28V 750kHz Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Hiccup current limiting Step-down type QFN-9(4x4.4) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
README
README.mdUFO
Parts
104| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C29, C30 +12 |
| 14 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R4, R5, R10, R11, R12, R13, R25, R26, R27, R28, R29, R30 |
| 10 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D5, D6, D7, D8, D9, D10, D11, D12, D13 |
| 9 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R17, R18, R19, R20, R21, R22, R23, R24 |
| 6 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 6 | 47u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8, C9, C39, C40, C41 |
| 4 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C46, C47, C48 |
| 3 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R14, R15 |
| 3 | TPSM84209RKHT | TPSM84209:TPSM84209RKHT | U1, U7, U8 |
| 2 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12 |
| 1 | 1.37k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 100p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 1 | 2.21k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 2k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31 |
| 1 | 50n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13 |
| 1 | ASDMB-xxxMHz | Oscillator:Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mm | U4 |
| 1 | Conn_01x02_Male | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J10 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x04_P1.27mm_Vertical_SMD | J2 |
| 1 | Conn_02x08_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x08_P1.27mm_Vertical_SMD | J13 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123F | D14 |
| 1 | D_Schottky | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | ICE40HX8K-BG121 | Package_BGA:BGA-121_9.0x9.0mm_Layout11x11_P0.8mm_Ball0.4mm_Pad0.35mm_NSMD | U3 |
| 1 | L | Inductor_SMD:L_Taiyo-Yuden_NR-40xx | L1 |
| 1 | LM555xM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MT25QL128ABA | Package_DFN_QFN:DFN-8-1EP_6x5mm_P1.27mm_EP2x2mm | U6 |
| 1 | SN74LV1T34DBV | Package_TO_SOT_SMD:SOT-23-5 | U5 |
More from Sussex-Invisibles/UFO
2- 4 layers29.7 × 29.7 mm

- 2 layers6.6 × 9.7 mm

Similar boards
- 4 layers100 × 100 mm

- 2 layers41 × 42 mm

Mini Air FC
darshg321/Mini-Air
Mini-Air is a DIY FPV drone! it features: - a custom flight controller supporting Betaflight - an ESC supporting Bluejay firmware - ELRS protocol - an analog camera - GPS
101 parts2CERN-OHL-W-2.0 - 4 layers41.6 × 42 mm

IEE Drone 2026
CalebJM04/IEEE-2026-UAV
Drone project for IEEE 2026 UAV. Primarily created by Caleb Murray
54 parts - 4 layers76.2 × 63.5 mm

- 4 layers45 × 75 mm

- 4 layers85 × 85 mm

- 4 layers20 × 70 mm

- 4 layers22 × 65 mm

Radianite Schtick
RadianiteComputers/RadianiteBoards
A collection of Radianite boards we have designed so far. All are licensed under CC BY-SA 4.0
52 parts
Questions
How big is the UFOControlDeck PCB?
It measures 29.7 × 29.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the UFOControlDeck use?
104 parts, built around the ICE40HX8K-BG121, SN74LV1T34DBV and TPSM84209RKHT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UFOControlDeck KiCad files?
From the Sussex-Invisibles/UFO repository on GitHub, at the commit this page was made from: the board is HW/Electronics/UFOControlDeck/UFOControlDeck.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the UFOControlDeck design in my own project?
Its repository states no licence, so its author keeps all rights: ask Sussex-Invisibles before reusing the design.