Skip to the content
88888987654321

TPSM84209RKHT

Texas InstrumentsExtended

-40℃~+85℃ 1 1.2V~6V 2.5A 4.5V~28V 750kHz Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Hiccup current limiting Step-down type QFN-9(4x4.4) DC-DC Converters ROHS

Part id
ti/TPSM84209RKHT
Category
DC DC Converters
Package
QFN-9(4x4.4)
Pins
11
In stock
0 at JLCPCB (C2836944)
Used on
3 open-source boards

Overview

The TPSM84209RKHT is a DC DC Converter made by Texas Instruments in a QFN-9(4x4.4) package with 9 pins. -40℃~+85℃ 1 1.2V~6V 2.5A 4.5V~28V 750kHz Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Hiccup current limiting Step-down type QFN-9(4x4.4) DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (tinkerforge:TPSM84209RKHT, from Tinkerforge) and its footprint (kicad-libraries-0092aa9ee5cafb486eb4c0747c12aa9485bea0fc:TPSM84209, from Tinkerforge), ready for a KiCad board. JLCPCB lists it (part C2836944). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

VIN2EN9GND8VOUT3FB1DNC7DNC6SW5SW4
tinkerforge:TPSM84209RKHTFrom Tinkerforge

Footprint

88888987654321
kicad-libraries-0092aa9ee5cafb486eb4c0747c12aa9485bea0fc:TPSM84209From Tinkerforge

Pinout

9
The pins of the TPSM84209RKHT
PinNameType
1FBInput
2VINPower in
3VOUTPower in
4SWPower in
5SWPower in
6DNCNot connected
7DNCNot connected
8GNDPower in
9ENInput

Open-source boards using it

3
  • 2 layers41 × 42 mmMini Air FC, the printed circuit board in 3D

    Mini Air FC

    darshg321/Mini-Air

    Mini-Air is a DIY FPV drone! it features: - a custom flight controller supporting Betaflight - an ESC supporting Bluejay firmware - ELRS protocol - an analog camera - GPS

    101 parts2CERN-OHL-W-2.0
  • 4 layers41.6 × 42 mmIEE Drone 2026, the printed circuit board in 3D

    IEE Drone 2026

    CalebJM04/IEEE-2026-UAV

    Drone project for IEEE 2026 UAV. Primarily created by Caleb Murray

    54 parts
  • 4 layers29.7 × 29.7 mmUFOControlDeck, the printed circuit board in 3D

    UFOControlDeck

    Sussex-Invisibles/UFO

    104 parts

Questions

Is there a KiCad symbol and footprint for the TPSM84209RKHT?

Yes. The symbol is tinkerforge:TPSM84209RKHT and the footprint kicad-libraries-0092aa9ee5cafb486eb4c0747c12aa9485bea0fc:TPSM84209, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPSM84209RKHT?

QFN-9(4x4.4), with 9 pins. Its footprint is drawn on this page.

Where is the TPSM84209RKHT datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPSM84209RKHT?

JLCPCB lists it as part C2836944, with 0 in stock; the sellers' links on this page open their listings.

Which open-source boards use the TPSM84209RKHT?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.