
Ws2815-corner left
SurrealityLabs/smart-led-corners
For making smart LED strips turn 90 degrees

For making smart LED strips turn 90 degrees
Ws2812b corner right is an open-source printed circuit board by SurrealityLabs, from the SurrealityLabs/smart-led-corners repository on GitHub. It is a 2-layer board of 20.3 × 20.3 mm with 4 parts on 4 nets, routed with 14 tracks and 0 vias.
It is built around the WS2812B. Its parts include 2 connectors, 1 capacitor and 1 diode.
For making smart LED strips turn 90 degrees
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | Conn_01x03 | WS2812B_Strip:strip_end | J2 |
| 1 | Conn_01x03 | WS2812B_Strip:strip_begin | J1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |

SurrealityLabs/smart-led-corners
For making smart LED strips turn 90 degrees

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



It measures 20.3 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
4 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SurrealityLabs/smart-led-corners repository on GitHub, at the commit this page was made from: the board is ws2812b-corner-right/ws2812b-corner-right.kicad_pcb and its schematic ws2812b-corner-left/ws2812b-corner-left.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SurrealityLabs before reusing the design.