2 layers42 × 67 mm
2 layers21 × 51 mm
Furboard
SuperNinjaCat5/furboardA RP2040 Devboard made following blueprint's guide, my first time doing hardware.
- Size
- 21 × 51 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 53
- Pads
- 196
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Oct 2025
- Updated
- 12 Oct 2025
Overview
Furboard is an open-source printed circuit board by SuperNinjaCat5, from the SuperNinjaCat5/furboard repository on GitHub. It is a 2-layer board of 21 × 51 mm with 33 parts on 53 nets.
It is built around the RP2040 and W25Q128JVSIQ. Its parts include 17 capacitors, 7 resistors, 4 connectors, 3 ICs and 1 switch. It belongs with the microcontroller boards boards and the RP2040 boards of this library.
Main components
2
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C6, C7, C8, C9, C10, C11, C12, C13, C14, C16, C17 |
| 2 | 10uF | Capacitor_SMD:C_0201_0603Metric | C1, C2 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R3, R5 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C5, C15 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 33pF | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | Conn_01x20 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J2, J4 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 12 MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U3 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U2 |
Similar boards
- 2 layers181 × 97 mm
OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 4 layers82.6 × 82.5 mm
- 4 layers102.9 × 96.7 mm
PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 4 layers180.8 × 300.3 mm
Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 2 layers130.4 × 76.6 mm
Gb stream cart
Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.
80 parts542 - 2 layers78 × 60 mm
- 2 layers44 × 44 mm
Questions
How big is the Furboard PCB?
It measures 21 × 51 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Furboard use?
33 parts, built around the RP2040 and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Furboard KiCad files?
From the SuperNinjaCat5/furboard repository on GitHub, at the commit this page was made from: the board is furboard.kicad_pcb and its schematic furboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Furboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask SuperNinjaCat5 before reusing the design.