Skip to the content
2 layers99.9 × 49.9 mmDrone, the printed circuit board in 3D
Size
99.9 × 49.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
12
Pads
106
Tracks, vias
163, 6
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
1 Dec 2024
Updated
16 Dec 2024

Overview

Drone is an open-source printed circuit board by SteveBrownJr, from the SteveBrownJr/DIY_ESP32_Quadrocopter repository on GitHub. It is a 2-layer board of 99.9 × 49.9 mm with 25 parts on 12 nets, routed with 163 tracks and 6 vias.

It is built around the TC4424EPA, LM2576HVS-3.3 and IRLZ34N. Its parts include 5 diodes, 5 connectors, 4 transistors, 3 ICs and 2 capacitors. It belongs with the robots and motor control boards and the ESP8266 boards of this library.

Main components

3

README

README.md

Schematic

The ESP32 is not enough to reliably drive 4 motors so I had to add 4 mosfets and 2 mosfet drivers. I supplied the 3.3V input voltage for the gyroscope and the microcontroller from a buck converter which is fixed internally. Rendered image of the PCB

BOM

NameNumberDescription
IRLZ34N4Transistor N-MOSFET 55V 30A/110p 68W
ICL-08P2IC socket 8p. DIL
TC4424EPA2DUAL POWER MOSFET DRIVER 3A 8p
1N58174Diode, SCHOTTKY 20V 1A/25Ap Uf:0.45V
LM2576S-3.31NOPB SW V-REG.STEP DOWN 3.3V 3A 5p. SMD
COILM10/R1.001100uH radial 1A 0.28ohm 4MHz 10%
1000/10P-105ESR-FR1ELectrolit capacitor 1000uF 10V 105°C
100/25P-105ESR-FR1Electrolit capacitor 100uF 25V 105°C

The body of the drone

I have been able to 3D print the body of the drone so I designed my own STL in Solid Works. You can find the STL in the 3DPrintableParts folder. I used a Creality Ender 3 V2 3D printer for the purpose and Cura slicer with dynamic resolution. Material was normal pla. You can see the quick overview below:

stl
solid Mesh
  facet normal 0.000000 0.000000 -1.000000
    outer loop
      vertex 116.426407 32.426407 11.100025
      vertex 52.426407 32.426407 11.100025
      vertex 52.426407 34.176407 11.100025
    endloop
  endfacet
  facet normal -0.000000 -0.000000 -1.000000
    outer loop
      vertex 116.426407 34.176407 11.100025
      vertex 116.426407 32.426407 11.100025
      vertex 52.426407 34.176407 11.100025
    endloop
  endfacet
  facet normal 0.000000 0.000000 -1.000000
    outer loop
      vertex 134.676392 52.426407 11.100025
      vertex 134.676392 66.426407 11.100025
      vertex 136.426407 66.426407 11.100025
    endloop
  endfacet
  facet normal 0.000000 0.000000 -1.000000
    outer loop

Parts

25
QtyValueFootprintReferences
4, , ,
41N5817Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD2, D3, D4, D5
4IRLZ34NPackage_TO_SOT_THT:TO-220-3_VerticalQ1, Q2, Q3, Q4
2TC4424EPAPackage_DIP:DIP-8_W7.62mm_SocketU2, U3
11000uFCapacitor_THT:CP_Radial_D7.5mm_P2.50mmC1
1100uFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC2
1100uH 1AInductor_THT:L_Radial_D8.7mm_P5.00mm_Fastron_07HCPL1
11N5822Diode_THT:D_DO-201AD_P15.24mm_HorizontalD1
1BATTConnector:JWT_A3963_1x02_P3.96mm_VerticalJ1
1LM2576HVS-3.3Package_TO_SOT_SMD:TO-263-5_TabPin3U1
1Motor 1Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_VerticalJ6
1Motor 2Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_VerticalJ7
1Motor 3Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_VerticalJ8
1Motor 4Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_VerticalJ5
1NodeMCU_DevKitC_v4Module:NodeMCU DevKitC v4ESP32

Similar boards

  • 4 layers181.7 × 80 mmLaserharp, the printed circuit board in 3D

    Laserharp

    heimdallaustria/Laserharp

    125 parts1
  • 4 layers222 × 100 mmHydroScan V1, the printed circuit board in 3D

    HydroScan V1

    paulmartinezcuenta/Proyecto_finales_mecatronica_ITLA

    Monorepo for two mechatronics projects sharing a panelized PCB: HydroScan (autonomous IoT maritime buoy with LTE, GPS, and solar power) and AUTOAMBU (automated medical respirator prototype with DC control and USB fast…

    156 parts1
  • 4 layers110 × 90 mmPLC V1, the printed circuit board in 3D

    PLC V1

    paulmartinezcuenta/UltiCore-V1-PLC

    Custom industrial-grade PLC and logic controller engineered around the ESP32 platform.

    202 parts1MIT
  • 2 layers122 × 94 mmTv decorder, the printed circuit board in 3D

    Tv decorder

    Aust1nke/DVBT2-DECORDER

    In this project i designed the pcb for a dvbt2 decorder

    73 parts
  • 2 layersShop guard, the printed circuit board in 3D

    Shop guard

    Aust1nke/Security_shop_guard

    I built this pcb using esp32, and lidar sensor to monitor and alert shop owner of intruders

    29 parts
  • 2 layers116.5 × 55.5 mmPcb v4, the printed circuit board in 3D

    Pcb v4

    Brent-Dickinson/SDP_PCB

    this is version 4 right now

    53 parts
  • 2 layers150 × 130 mmGarden Board, the printed circuit board in 3D

    Garden Board

    bvs7/gemini-home

    Poll a Nest Thermostat and track temperature data

    68 parts
  • 2 layers34.3 × 74.9 mmPantryLED, the printed circuit board in 3D

    PantryLED

    DanBattaglia4/Smart-Switch-LED-

    20 parts

Questions

How big is the Drone PCB?

It measures 99.9 × 49.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Drone use?

25 parts, built around the TC4424EPA, LM2576HVS-3.3 and IRLZ34N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Drone KiCad files?

From the SteveBrownJr/DIY_ESP32_Quadrocopter repository on GitHub, at the commit this page was made from: the board is Schematic_and_PCB/Drone.kicad_pcb and its schematic Schematic_and_PCB/Drone.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Drone design in my own project?

Its repository states no licence, so its author keeps all rights: ask SteveBrownJr before reusing the design.