

UHoubolt PCB PMU
µHoubolt Power Management Unit KiCad project
- Size
- 59 × 7.1 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 166
- Nets
- 154
- Pads
- 692
- Tracks, vias
- 755, 781
- Pours
- 32
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 16 Nov 2020
- Updated
- 23 Sep 2023
Overview
UHoubolt PCB PMU is an open-source printed circuit board by SpaceTeam, from the SpaceTeam/uHoubolt_PCB_PMU repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 4-layer board of 59 × 7.1 mm with 166 parts on 154 nets, routed with 755 tracks and 781 vias.
It is built around the LPS25HB, ICM-20602 and LM5069MM-1, with the MCP1700-3302E/TT, SFH617A-1X007T and W25Q256JV among its other parts. Its parts include 44 resistors, 39 capacitors, 25 connectors, 17 diodes and 14 ICs. It belongs with the STM32 boards of this library.
Main components
8LPS25HB
HLGA-10(2.5x2.5)-30℃~+105℃ 0.1hpa 0.2hpa 1.7V~3.6V 26Kpa~1.26bar I2C、SPI No HLGA-10(2.5x2.5) Pressure Sensors ROHSSTMicroelectronicsPressure SensorsICM-20602
LGA-16(3x3)-40℃~+85℃ 1.71V~3.45V 16bit 1KB 6uA IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps 运动事件检测 LGA-16(3x3) Accelerometers ROHSTDK InvenSenseAccelerometersLM5069MM-1
MSOP-10MSOP-10 Power Management - Specialized ROHSTexas InstrumentsPower Management - SpecializedMCP1700-3302E/TT
SOT-23-40℃~+125℃@(Tj) 1 1.6uA 178mV@(250mA) 250mA 3.3V 44dB@(100Hz) 6V Fixed Over Temperature Protection、Short Circuit Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSFH617A-1X007T
SMD-4P-55℃~+110℃ 1 1.35V 250mV@10mA,10mA 2us 2us 40% 5.3kV 50mA 6V 70V 80% Phototransistor SMD-4P Transistor, Photovoltaic Output Optoisolators ROHSVishay IntertechnologyTransistor, Photovoltaic Output OptoisolatorsW25Q256JV
UncategorisedWinbondBSZ0902NSATMA1
TSDSON-8-55℃~+150℃ 1 N-channel 106A 2.261nF 2V 3.5mΩ@4.5V 30V 35nC@10V 48W 798pF 88pF N-Channel TSDSON-8 MOSFETs ROHSInfineon TechnologiesMOSFETsBSZ0905PNSATMA1
TSDSON-8TSDSON-8 New Arrivals ROHSInfineon TechnologiesUncategorised
README
README.mdµHoubolt Power Management Unit (PMU) Hardware
Features
- Altimeter capability (barometer, IMU, 2x Low Side Fet)
- 2x Low Side Fet for camera
- 1x Optocoupler for payload enable
- 2x LiIon Charger
- Flash for data logging
- 2x CAN FD
Known Issues
- CAN Rx and Tx are swapped on CAN1 and CAN2
- No Battery Voltage Sense
- No Pyro Voltage Sense
- Same Connector for 12V and 24V
- No direct hardware arming for primary altimax
- Supply Current Sense is connected to the wrong pin
- Layout: Battery connector is hard to disconnect because it's next to the mounting hole (threaded rod)
- When powering cameras from pyro voltage, their initial current draw is large enough to trigger the overcurrent protection --> all supplied devices might get power cycled when safety pin is pulled (especially bad for ECU, might cause igniters to fire, see ECU known issues)
Parts
166| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 120 | Resistor_SMD:R_0603_1608Metric | R11, R12, R15, R28, R29, R30, R32, R34, R35, R37, R38, R40, R42, R49, R56 |
| 14 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C20, C21, C23, C25, C26, C27, C28, C29, C30, C35, C40, C41, C42 |
| 12 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R8, R14, R20, R21, R33, R36, R39, R41, R46, R47, R48 |
| 10 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C6, C15, C19, C32, C33, C37, C38, C45, C46 |
| 8 | 22u | Capacitor_SMD:C_0805_2012Metric | C4, C5, C16, C17, C43, C44, C47, C48 |
| 8 | R | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R17, R18, R31, R43, R44 |
| 5 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C22, C24, C31, C34, C36 |
| 5 | OUT 1 | LED_SMD:LED_0603_1608Metric | D10, D12, D14, D17, D25 |
| 5 | SISA88DN or similar | TXV_Library_Footprints:PowerPAK_1212-8 | Q3, Q4, Q5, Q6, Q7 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R10, R16, R19, R45 |
| 4 | CAN1 | Connector_JST:JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J12, J14, J16, J18 |
| 4 | CAN2 | Connector_JST:JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J13, J15, J17, J19 |
| 4 | Jumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4, JP5, JP6, JP7 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 4 | Output | TXV_Library_Footprints:Molex_Nano-Fit_105309-xx02_1x02_P2.50mm_Vertical | J20, J21, J22, J24 |
| 4 | Shottky | Diode_SMD:D_SOD-123F | D11, D13, D15, D18 |
| 2 | 4.7u | TXV_Library_Footprints:SRN4018TA-4R7M | L1, L3 |
| 2 | 5V | LED_SMD:LED_0603_1608Metric | D7, D16 |
| 2 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP3 |
| 2 | LED_Small_Filled | LED_SMD:LED_0603_1608Metric | LED1, LED2 |
| 2 | LiIon_Charger | TXV_Library_Footprints:LiIon_Charger_Footprint | U4, U14 |
| 2 | MCP2562FDx-x_MF | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U8, U9 |
| 2 | RCU | TXV_Library_Footprints:Molex_SL_1x2_Vertical | J8, J25 |
| 2 | TS30041 | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm_ThermalVias | U3, U13 |
| 2 | Umbilical0 | TXV_Library_Footprints:Molex_Nano-Fit_105309-xx02_1x02_P2.50mm_Vertical | J1, J26 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C39 |
| 1 | 2m | Resistor_SMD:R_1206_3216Metric | R6 |
| 1 | 30V | Diode_SMD:D_SOD-123F | D1 |
| 1 | 3V3 | LED_SMD:LED_0603_1608Metric | D9 |
| 1 | 470n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 56k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | AltimaxArm | TXV_Library_Footprints:Molex_SL_1x2_Vertical | J6 |
| 1 | AltimaxPwr | TXV_Library_Footprints:Molex_SL_1x2_Vertical | J11 |
| 1 | BSZ0902NSATMA1 | TXV_Library_Footprints:PG_TSDSON-8 | Q2 |
| 1 | BSZ0905PNSATMA1 | TXV_Library_Footprints:PG_TSDSON-8 | Q1 |
| 1 | Battery | TXV_Library_Footprints:Molex_MegaFit_1x03_Vertical | J2 |
| 1 | BatteryAltimax | TXV_Library_Footprints:Molex_SL_1x2_Vertical | J4 |
| 1 | Debug | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical_SMD_Pin1Left | J9 |
| 1 | Debug | Connector_PinHeader_1.27mm:PinHeader_2x04_P1.27mm_Vertical_SMD | J10 |
| 1 | Fuse_Small | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | F1 |
| 1 | ICM-20602 | Package_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U10 |
| 1 | LM5069 | Package_SO:VSSOP-10_3x3mm_P0.5mm | U1 |
| 1 | LMP8640 F | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | LPS25HB | Package_LGA:ST_HLGA-10_2.5x2.5mm_P0.6mm_LayoutBorder3x2y | U11 |
| 1 | MCP1700-3302E | Package_TO_SOT_SMD:SOT-23 | U7 |
| 1 | NP | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | Payload | TXV_Library_Footprints:Molex_Nano-Fit_105309-xx02_1x02_P2.50mm_Vertical | J23 |
| 1 | Power | TXV_Library_Footprints:Molex_MegaFit_1x03_Vertical | J3 |
| 1 | Power_1 | TXV_Library_Footprints:D2F_A | SW1 |
| 1 | Power_2 | TXV_Library_Footprints:D2F_A1 | SW2 |
| 1 | Pyro_1 | TXV_Library_Footprints:D2F_A | SW3 |
| 1 | Pyro_2 | TXV_Library_Footprints:D2F_A1 | SW4 |
| 1 | SFH617A-1X007T | Package_DIP:SMDIP-4_W9.53mm_Clearance8mm | U12 |
| 1 | STM32G491MET6-LQFP80 | Package_QFP:LQFP-80_12x12mm_P0.5mm | U5 |
| 1 | SpaceTeam_LOGO | TXV_Library_Footprints:ST_Logo_new | G1 |
| 1 | Speaker | TXV_Library_Footprints:Piezo_Buzzer | LS1 |
| 1 | TVS 3V3 | TXV_Library_Footprints:SOD882D | D8 |
| 1 | TXC-7C | Oscillator:Oscillator_SMD_TXC_7C-4Pin_5.0x3.2mm | X1 |
| 1 | Umbilical1 | TXV_Library_Footprints:Molex_Nano-Fit_105309-xx02_1x02_P2.50mm_Vertical | J7 |
| 1 | VIN | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | W25Q256JV | TXV_Library_Footprints:WSON-8-8x6mm | U6 |
Similar boards
- 4 layers82.6 × 76 mm

- 4 layers80 × 140 mm

- 4 layers70 × 40 mm

UHoubolt PCB ECU
SpaceTeam/uHoubolt_PCB_ECU
µHoubolt Engine Control Unit KiCad project
216 parts2CERN-OHL-W-2.0 - 2 layers80 × 66 mm

Periph
bastien313/Open-test-bench
Open test bench is an open-source platform for drive or characterize any type of system. The system is made for simplifying the development of additional modules called "peripheral module".
46 parts6GPL-3.0 - 4 layers50 × 18 mm

- 2 layers158.4 × 98.8 mm

Motor driver
hex-inverter/VVVF_motor_drive
The inspiration for this project came from a very characteristic sound in Amsterdam metro trams. During acceleration or braking they make a "shifting gears" sound even though the motors are electric (this sound can also…
68 parts1 - 4 layers115 × 108 mm

- 6 layers100 × 53.8 mm

Questions
How big is the UHoubolt PCB PMU PCB?
It measures 59 × 7.1 mm and has 4 copper layers, 4.69 mm thick.
What parts does the UHoubolt PCB PMU use?
166 parts, built around the LPS25HB, ICM-20602, LM5069MM-1 and MCP1700-3302E/TT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UHoubolt PCB PMU KiCad files?
From the SpaceTeam/uHoubolt_PCB_PMU repository on GitHub, at the commit this page was made from: the board is uHoubolt_PCB_PMU.kicad_pcb and its schematic 5V_SMPS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the UHoubolt PCB PMU design in my own project?
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).