

UHoubolt PCB GNSS
- Size
- 82.6 × 76 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 105
- Pads
- 514
- Tracks, vias
- 736, 381
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 22 May 2021
- Updated
- 23 Sep 2023
Overview
UHoubolt PCB GNSS is an open-source printed circuit board by SpaceTeam, from the SpaceTeam/uHoubolt_PCB_RCU repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 4-layer board of 82.6 × 76 mm with 90 parts on 105 nets, routed with 736 tracks and 381 vias.
It is built around the MCP2562FDT-E/MF, LPS25HB and MCP1700-3302E/TT, with the ICM-20602, LORA1276F30-868 and SAM-M8Q-0 among its other parts. Its parts include 35 capacitors, 17 resistors, 11 ICs, 8 connectors and 7 diodes. It belongs with the radio and wireless boards and the STM32 boards of this library.
Main components
9MCP2562FDT-E/MF
DFN-8(3x3)-40℃~+125℃ 1 15uA 4.5V~5.5V 45mA 8Mbps CAN FD Transceiver Low-power mode、Wake-up function、TXD dominant timeout、ESD protection、Undervoltage Protection、Thermal shutdown protection、Short-Circuit Protection、Integrated level shifting DFN-8(3x3) CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversLPS25HB
HLGA-10(2.5x2.5)-30℃~+105℃ 0.1hpa 0.2hpa 1.7V~3.6V 26Kpa~1.26bar I2C、SPI No HLGA-10(2.5x2.5) Pressure Sensors ROHSSTMicroelectronicsPressure SensorsMCP1700-3302E/TT
SOT-23-40℃~+125℃@(Tj) 1 1.6uA 178mV@(250mA) 250mA 3.3V 44dB@(100Hz) 6V Fixed Over Temperature Protection、Short Circuit Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsICM-20602
LGA-16(3x3)-40℃~+85℃ 1.71V~3.45V 16bit 1KB 6uA IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps 运动事件检测 LGA-16(3x3) Accelerometers ROHSTDK InvenSenseAccelerometersLORA1276F30-868
SMD,38x20mmSMD,38x20mm SMT ROHSG-NiceRFUncategorisedSAM-M8Q-0
SMD-20P,15x15mmUncategorisedu-bloxW25Q256JV
UncategorisedWinbondCDBU0240-HF
SOD-523F1uA@30V 200mA 3A 40V 450mV@200mA Independent SOD-523F Schottky Diodes ROHSComchipSchottky DiodesMMCX-J-P-H-RA-SM1
-1 50Ω 6GHz 7mm Board Side Elbow Inner hole MMCX - Coaxial Connectors (RF) ROHSSamtecCoaxial Connectors (RF)
README
README.mduHoubolt Radio Communication Unit (RCU) Hardware
Known Issues
- Silkscreen Label of CAN1 and CAN2 are swapped
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C10, C11, C13, C14, C16, C17, C19, C20, C21, C22, C28, C30, C32, C33 +7 |
| 7 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C3, C5, C12, C15, C25, C26, C27 |
| 6 | 120 | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R10, R11, R17 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R8, R15, R16 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R5, R6, R14 |
| 3 | 22u | Capacitor_SMD:C_0805_2012Metric | C23, C24, C29 |
| 2 | CAN1 | Connector_JST:JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J4, J6 |
| 2 | CAN2 | Connector_JST:JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J5, J7 |
| 2 | LED_Small_Filled | LED_SMD:LED_0603_1608Metric | LED1, LED2 |
| 2 | MCP1700-3302E | Package_TO_SOT_SMD:SOT-23 | U4, U8 |
| 2 | MCP2562FDT | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U5, U6 |
| 2 | SolderJumper_ | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C31 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C18 |
| 1 | 1F | Capacitor_SMD:CP_Elec_10x10.5 | SuperCap1 |
| 1 | 3V3 | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | 4u7 | TXV_Library_Footprints:SRN4018TA-4R7M | L1 |
| 1 | 56k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 5V | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | CDBU0240-HF | Diode_SMD:D_SOD-323F | D2 |
| 1 | Debug | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical_SMD_Pin1Left | J2 |
| 1 | Debug | Connector_PinHeader_1.27mm:PinHeader_2x04_P1.27mm_Vertical_SMD | J3 |
| 1 | ICM-20602 | Package_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U9 |
| 1 | LOGO | TXV_Library_Footprints:ST_Logo_new | G*** |
| 1 | LPS25HB | Package_LGA:ST_HLGA-10_2.5x2.5mm_P0.6mm_LayoutBorder3x2y | U11 |
| 1 | LoRa1276F30 | TXV_Library_Footprints:G-NiceRF-LoRa1268F30 | U10 |
| 1 | MMCX-J-P-H-RA-SM1 | TXV_Library_Footprints:MMCX_Horizontal_THT | J12 |
| 1 | Power In | TXV_Library_Footprints:Molex_Nano-Fit_105309-xx02_1x02_P2.50mm_Vertical | J1 |
| 1 | R_x | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | R_y | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | SAM-M8Q | TXV_Library_Footprints:SAM-M8Q | U1 |
| 1 | SISA88DN or similar | TXV_Library_Footprints:PowerPAK_1212-8 | Q1 |
| 1 | STM32G491MET6-LQFP80 | Package_QFP:LQFP-80_12x12mm_P0.5mm | U2 |
| 1 | Speaker | TXV_Library_Footprints:Piezo_Buzzer | LS1 |
| 1 | TS30041 | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm_ThermalVias | U7 |
| 1 | TVS 3V3 | TXV_Library_Footprints:SOD882D | D4 |
| 1 | TXC-7C | Oscillator:Oscillator_SMD_TXC_7C-4Pin_5.0x3.2mm | X1 |
| 1 | VIN | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | W25Q256JV | TXV_Library_Footprints:WSON-8-8x6mm | U3 |
More from SpaceTeam/uHoubolt_PCB_RCU
1- 2 layers12 × 8 mm

Similar boards
- 4 layers59 × 7.1 mm

UHoubolt PCB PMU
SpaceTeam/uHoubolt_PCB_PMU
µHoubolt Power Management Unit KiCad project
166 partsCERN-OHL-W-2.0 - 4 layers70 × 40 mm

UHoubolt PCB ECU
SpaceTeam/uHoubolt_PCB_ECU
µHoubolt Engine Control Unit KiCad project
216 parts2CERN-OHL-W-2.0 - 4 layers80 × 80 mm

- 2 layers50 × 50 mm

Flight controller V1
anish007-av/Flight-Controller---PCB
Learning-focused STM32 flight controller PCB designed in KiCad.
27 parts - 4 layers31 × 100 mm

Kp ptr
PTR-projects/PTR_mega_hardware
Welcome to the KPPTR-hardware repository! This repository contains the design files for the hardware components used in the KPPTR project.
208 parts3MIT - 4 layers80 × 140 mm

- 4 layers70 × 80 mm

Easycomm
stamina/easyriderc
Motorcycle ECU STM32 ARM Cortex 4 source code and hardware PCB design
41 parts14GPL-3.0 - 2 layers193 × 72 mm

Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
6 parts2
Questions
How big is the UHoubolt PCB GNSS PCB?
It measures 82.6 × 76 mm and has 4 copper layers, 1.6 mm thick.
What parts does the UHoubolt PCB GNSS use?
90 parts, built around the MCP2562FDT-E/MF, LPS25HB, MCP1700-3302E/TT and ICM-20602. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UHoubolt PCB GNSS KiCad files?
From the SpaceTeam/uHoubolt_PCB_RCU repository on GitHub, at the commit this page was made from: the board is uHoubolt_PCB_GNSS.kicad_pcb and its schematic uHoubolt_PCB_Balun.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the UHoubolt PCB GNSS design in my own project?
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).