2 layers
Estop
SoonerRobotics/igvc_hardware_2020
Hardware and schematics for the Steel Cannon, our 2020 IGVC Competition robot
28 parts2
2 layers40 × 63 mm
PeripheralPowerControl
SoonerRobotics/igvc_hardware_20202Hardware and schematics for the Steel Cannon, our 2020 IGVC Competition robot
- Size
- 40 × 63 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 7
- Pads
- 20
- Tracks, vias
- 31, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Jul 2019
- Updated
- 8 Mar 2020
Overview
PeripheralPowerControl is an open-source printed circuit board by SoonerRobotics, from the SoonerRobotics/igvc_hardware_2020 repository on GitHub. It is a 2-layer board of 40 × 63 mm with 10 parts on 7 nets, routed with 31 tracks and 0 vias.
It is built around the LM2596S-5.0 and IPP120P04P4L03AKSA1. Its parts include 2 connectors and 1 resistor.
Main components
2
LM2596S-5.0
TO-263-5-40℃~+125℃@(TJ) 1 150kHz 3A 4.5V~40V 5V 5mA Buck Buck Built-in Fixed No TO-263-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
IPP120P04P4L03AKSA1
TO-220-3-55℃~+175℃@(Tj) 1 P-Channel 120A 136W 15nF@25V 2.2V@340uA 234nC@10V 3.4mΩ@100A,10V 40V TO-220-3 MOSFETs ROHSInfineon TechnologiesMOSFETs
README
Motor Power Control/README.mdMotor Power Control Board
Enable and disable power to a peripheral component (such as a camera, Raspberry Pi, or Arduino) and regulate voltage for the peripheral.
Components
- LM2956 Breakout Board - Buck Converter (can find on Amazon easily)
- IPP120P04P4L03AKSA1 - 120A rated Power PMOS
- 64600001003 - Fuse Holder
Images
- insert top view picture of PCB
Designers
- XXX - YYY - ZZZ
Built With
- KiCAD - The PCB design software used
Errata
- TBD
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | 64600001003 | LibraryLoader:646-SERIESHOLDER | FUSE1 |
| 1 | Conn_01x03 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | IPP120P04P4L03AKSA1 | LibraryLoader:TO254P440X1000X2110-3P | PMOS1 |
| 1 | LM2596 | SCR_KiCAD_Lib:LM2596 | BUCK1 |
| 1 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J2 |
More from SoonerRobotics/igvc_hardware_2020
5- 2 layers
MotorNucleo
SoonerRobotics/igvc_hardware_2020
Hardware and schematics for the Steel Cannon, our 2020 IGVC Competition robot
15 parts2 - 2 layers
MotorPowerControl
SoonerRobotics/igvc_hardware_2020
Hardware and schematics for the Steel Cannon, our 2020 IGVC Competition robot
14 parts2 - 2 layers55.9 × 82.6 mm
Estop Remote
SoonerRobotics/igvc_hardware_2020
Hardware and schematics for the Steel Cannon, our 2020 IGVC Competition robot
8 parts2 - 2 layers
JSTHeader
SoonerRobotics/igvc_hardware_2020
Hardware and schematics for the Steel Cannon, our 2020 IGVC Competition robot
4 parts2
Similar boards
- 4 layers95 × 95 mm
Cube motherboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
52 parts1.1kGPL-3.0 - 2 layers100 × 100 mm
Hydromisc
hydromisc/hydromisc
Open hardware to measure EC and pH, drive pumps, and otherwise manage a mid-size hydroponic grow over Wi-Fi.
179 parts526 - 2 layers100 × 68 mm
- 2 layers76.1 × 85 mm
- 2 layers156.8 × 67.3 mm
YM2151 STM32 VGM
AidanHockey5/YM2151_VGM_STM32
A hardware arcade video game music player based on the STM32 platform driving a YM2151
52 parts81AGPL-3.0 - 6 layers249.4 × 111.5 mm
- 4 layers100 × 49.8 mm
- 2 layers89.2 × 103.5 mm
Oas
hubertciebiada/open-ambient-sensor
OAS — Open Ambient Sensor: DIY multi-sensor indoor environmental monitor (CO2, PM, VOC/NOx, temperature/humidity, mmWave presence) on ESP32-C6 with ESPHome / Home Assistant integration
64 parts44GPL-3.0
Questions
How big is the PeripheralPowerControl PCB?
It measures 40 × 63 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PeripheralPowerControl use?
10 parts, built around the LM2596S-5.0 and IPP120P04P4L03AKSA1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PeripheralPowerControl KiCad files?
From the SoonerRobotics/igvc_hardware_2020 repository on GitHub, at the commit this page was made from: the board is Peripheral Power Control/PeripheralPowerControl.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PeripheralPowerControl design in my own project?
Its repository states no licence, so its author keeps all rights: ask SoonerRobotics before reusing the design.