
Estop
SoonerRobotics/igvc_hardware_2020
Hardware and schematics for the Steel Cannon, our 2020 IGVC Competition robot

Hardware and schematics for the Steel Cannon, our 2020 IGVC Competition robot
MotorPowerControl is an open-source printed circuit board by SoonerRobotics, from the SoonerRobotics/igvc_hardware_2020 repository on GitHub. It is a 2-layer board with 14 parts on 8 nets, routed with 25 tracks and 0 vias.
It is built around the IPP120P04P4L03AKSA1. Its parts include 5 connectors and 1 resistor.
Enable and disable power to a peripheral component (such as a camera, Raspberry Pi, or Arduino) and regulate voltage for the peripheral.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 178.6164.0002 | LibraryLoader:178.6164.0002_1 | J2, J4, J5, J6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H2, H3, H4, H5 |
| 2 | Conn_01x02 | Connector_Wire:SolderWirePad_1x02_P7.62mm_Drill2.5mm | CONN1, CONN2 |
| 1 | Conn_01x03 | Connector_Wire:SolderWirePad_1x03_P7.62mm_Drill2.5mm | J1 |
| 1 | HSE-B20250-040H | LibraryLoader:HSEB20250040H | H1 |
| 1 | IPP120P04P4L03AKSA1 | LibraryLoader:TO254P440X1000X2110-3P | PMOS1 |
| 1 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |

SoonerRobotics/igvc_hardware_2020
Hardware and schematics for the Steel Cannon, our 2020 IGVC Competition robot

SoonerRobotics/igvc_hardware_2020
Hardware and schematics for the Steel Cannon, our 2020 IGVC Competition robot

SoonerRobotics/igvc_hardware_2020
Hardware and schematics for the Steel Cannon, our 2020 IGVC Competition robot

SoonerRobotics/igvc_hardware_2020
Hardware and schematics for the Steel Cannon, our 2020 IGVC Competition robot

SoonerRobotics/igvc_hardware_2020
Hardware and schematics for the Steel Cannon, our 2020 IGVC Competition robot

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


14 parts, built around the IPP120P04P4L03AKSA1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SoonerRobotics/igvc_hardware_2020 repository on GitHub, at the commit this page was made from: the board is Motor Power Control/MotorPowerControl.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SoonerRobotics before reusing the design.