
Gsm rtc board
SniperCZE/sms-gateway
Open SW/HW 1U SMS gateway based on raspberry pi and SIM800L.

Open SW/HW 1U SMS gateway based on raspberry pi and SIM800L.
Pdu board is an open-source printed circuit board by SniperCZE, from the SniperCZE/sms-gateway repository on GitHub, published under the MIT licence. It is a 2-layer board of 400 × 30 mm with 26 parts on 6 nets, routed with 47 tracks and 0 vias.
It is built around the 2N2222A. Its parts include 11 connectors, 2 diodes, 2 transistors and 1 resistor.
This board handles RTC and GSM modules, connects them to Raspberry and provide power for modules and Raspberry

| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D5, D6 |
| 2 | 2N2222A | Package_TO_SOT_THT:TO-18-3 | Q1, Q2 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R1 |
| 1 | FAN_A | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J15 |
| 1 | FAN_B | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J14 |
| 1 | PWM_RPI | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J13 |
| 1 | Power | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J9 |
| 1 | Raspberry_A | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | Raspberry_B | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | Raspberry_C | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | Raspberry_D | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | Raspberry_MGMT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J12 |
| 1 | SWITCH | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J11 |
| 1 | TERM | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J10 |
The 16 most common of 26 parts.

SniperCZE/sms-gateway
Open SW/HW 1U SMS gateway based on raspberry pi and SIM800L.


lynchaj/rhyophyre
Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller

alvaroalea/QL_QsoundQprint_clone
A clone board of the Sound card for the Sinclair QL Computer.

profdc9/NixieClock
A Nixie clock that uses IN-14 tubes and very generic components that can be easily sourced.

jensma-de/MM58167-ISA-RTC
RTC module for the ISA slot. With schematics, project files in kicad and open source software to drive the clock.


gidim/e61-gauge
An analog temperature gauge for E61 espresso machines. A custom PCB drives a VID6606 stepper motor gauge needle, reading temperature from an NTC thermistor.

cnobile2012/Li-IonBatteryProtection
Circuit to protect Li-Ion and Li-Po batteries at the cell level.
It measures 400 × 30 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the 2N2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SniperCZE/sms-gateway repository on GitHub, at the commit this page was made from: the board is electronic/pdu-board/pdu-board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).