
Bsl drv v1
jackw01/scanlight
A better light source for scanning color negative film

A really small and simple USB-C PCB with 2 output pads. It's for 12V (47k resistor), but if you want higher voltage, buy a different Rset resistor and fuse.
USB C2easypads kicad is an open-source printed circuit board by Small-doge128, from the Small-doge128/USB-C2easypads repository on GitHub. It is a 2-layer board of 22.8 × 10.8 mm with 13 parts on 14 nets, routed with 77 tracks and 15 vias.
It is built around the CH221K and HSD12C. Its parts include 4 resistors, 3 capacitors, 3 connectors, 1 IC and 1 diode.
A really small, compact and simple USB-C PCB with 2 output pads and of course USB-C (16pin). It's for 12V (47k resistor), but if you want higher voltage, buy a different Rset resistor, TVS diodes and fuse. onshape
USB-C 16 pin, 2 output pads, 4 resistors, 1 poly fuse, CH221K for higher voltage, 10uf capacitor and 100nf capacitor. All bundled up on a small PCB that I designed in Kicad. If you want you can have higher voltage or lower, all you need to do is change the fuse, TVS diodes and Rset resistor. The target voltage can be easily set by a table on the back of the PCB and a arrow pointing to the Rset resistor.
PCB - 22.75 mm x 10.75 mm
I wanted a way to convert my soldering iron to USB-C for better usability, so I thought why not make it for more use and for more people, so that's how it was created.
| Name | Purpose | Qty | Price (USD) | Distributor | Link |
|---|---|---|---|---|---|
| PCB | for conecting all of the parts | 5 | $ 5 | PCBWAY | Link |
| CH221K chip | for drawing more power from the USB-C | 5 | $ 1.65 | LCSC | Link |
| TVS diode | for protection | 10 | $ 0.06 | LCSC | Link |
| polyfuse | for protecting all of the parts from over-current / short circuits | 20 | $ 0.69 | LCSC | Link |
| 47kΩ resistor | for drawing the requested voltage | 100 | $ 1.31 | LCSC | Link |
| 1kΩ resistor | protection | 100 | already at home | LCSC | Link |
| 5.1kΩ resistor | protection | 200 | already at home | LCSC | Link |
| 10uf capacitor | protection | 100 | already at home | LCSC | Link |
| 100nf capacitor | protection | 100 | already at home | LCSC | Link |
| TOTAL without shipping and taxes | $ 8.71 | ||||
| TOTAL with shipping and taxes | $ 43 |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | R | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R2, R3, R4, R5 |
| 2 | Conn_01x01_Pin | TestPoint:TestPoint_Pad_2.0x2.0mm | J2, J3 |
| 1 | 3A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | CH221K | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | C_Small | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | C_Small | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | C_Small | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | HSD12C | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |

jackw01/scanlight
A better light source for scanning color negative film


CYP4502D6/DCJ11CoreBoard
PDP-11 replica project based on the DEC DCJ-11 chipset, utilizing FPGA as bus controller and peripheral emulator, using external SRAM to provide system memory




midarubiccube/canfd_meisi
この名刺はPCとつなぐだけでCANFDができるという最高で実用性マシマシの名刺となっています。 特徴として + SLCANでserialを経由しCANが可能 + CANFD2ch搭載 + CANFDをLANケーブルに変換 + 終端抵抗 + LANケーブルでPoE給電(12V)が可能。 + インジケータ付き

It measures 22.8 × 10.8 mm and has 2 copper layers, 1.6 mm thick.
13 parts, built around the CH221K and HSD12C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Small-doge128/USB-C2easypads repository on GitHub, at the commit this page was made from: the board is USB-C2easypads_kicad/USB-C2easypads_kicad.kicad_pcb and its schematic USB-C2easypads_kicad/USB-C2easypads_kicad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Small-doge128 before reusing the design.