

Raspberry pi pico
- Size
- 29.7 × 58.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 53
- Pads
- 183
- Tracks, vias
- 776, 78
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 31 Aug 2023
- Updated
- 31 Aug 2023
Overview
Raspberry pi pico is an open-source printed circuit board by Shubham8-hub, from the Shubham8-hub/Raspberry-pi-pico repository on GitHub. It is a 4-layer board of 29.7 × 58.9 mm with 37 parts on 53 nets, routed with 776 tracks and 78 vias.
It is built around the RP2040 and W25Q128JVSIQ. Its parts include 17 capacitors, 6 resistors, 5 connectors, 3 ICs and 1 diode. It belongs with the RP2040 boards of this library.
Main components
2RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16 |
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 3 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R6 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C17 |
| 2 | 27R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 2 | 30p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 2 | Conn_01x15_Pin | Connector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_Vertical | J3, J4 |
| 1 | 12MHZ | Crystal:Crystal_SMD_7050-4Pin_7.0x5.0mm | Y1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | DNP | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521_CircularHoles | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
Similar boards
- 2 layers42 × 67 mm

- 2 layers181 × 97 mm

OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 4 layers82.6 × 82.5 mm

- 4 layers102.9 × 96.7 mm

PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 4 layers180.8 × 300.3 mm

Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 2 layers130.4 × 76.6 mm

Gb stream cart
Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.
80 parts542 - 2 layers78 × 60 mm

- 2 layers44 × 44 mm

Questions
How big is the Raspberry pi pico PCB?
It measures 29.7 × 58.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Raspberry pi pico use?
37 parts, built around the RP2040 and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Raspberry pi pico KiCad files?
From the Shubham8-hub/Raspberry-pi-pico repository on GitHub, at the commit this page was made from: the board is Raspberry_Pi_Pico.kicad_pcb and its schematic Raspberry_Pi_Pico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Raspberry pi pico design in my own project?
Its repository states no licence, so its author keeps all rights: ask Shubham8-hub before reusing the design.