
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

A 35% Katana stagger keyboard with a 3 degree tilt with a stacked acrylic case and a Hotswap pro micro PCB
Shrimptana v1 is an open-source printed circuit board by ShrimpedKeyboard, from the ShrimpedKeyboard/Shrimptana repository on GitHub. It is a 2-layer board of 260.3 × 86.3 mm with 122 parts on 84 nets, routed with 786 tracks and 113 vias.
It is built around the WS2812B. Its parts include 55 diodes, 10 capacitors, 6 switches and 1 IC. It belongs with the keyboards and input boards and the RP2040 and AVR (ATmega, ATtiny) boards of this library.
The shrimptana is a 35% katana stagger keyboard with a 3 degree tilt and an optional rotary encoder in the center

Shrimptana uses a 9 layer stacked acrylic case with a bottom mount/Gasket mount plate The case uses m3 spacers and screws and the plate uses m2 / 40mm gaskets

Also has funny shrimp on the back

A hotswap pro micro RP2040 pcb with underglow RGB
I plan to sell this board instock in the future once my storefront is at this board is untested at the momment i do not recomend producing it DM xshrimped on discord if you have any questions https://discord.gg/pNWCxb3Fh5
| Qty | Value | Footprint | References |
|---|---|---|---|
| 45 | D | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +29 |
| 38 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1u | MX2, MX10, MX11, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23, MX25, MX27, MX28 +22 |
| 10 | 104 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C0, C1, C2, C3, C4, C5, C6, C7, C8, C9 |
| 10 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | LED0, LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9 |
| 4 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_1u | MX26, MX35, MX38, MX39 |
| 3 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1.25u | MX13, MX41, MX46 |
| 2 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1.75u | MX43, MX44 |
| 2 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_3u | S1, S2 |
| 2 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_2u | S3, S4 |
| 1 | MX_SW_HS | ScottoKeebs_Hotswap:Hotswap_MX_Plated_1.50u_90deg | MX12 |
| 1 | MX_SW_HS | ScottoKeebs_Hotswap:Hotswap_MX_Plated_1.25u_90deg | MX24 |
| 1 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1.5u | MX1 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_ISO | S5 |
| 1 | RP2040_Pro_Micro | ScottoKeebs_MCU:RP2040_Pro_Micro | U1 |
| 1 | Rotary_Encoder_Switch | PCM_marbastlib-various:ROT_Alps_EC11E-Switch | SW1 |

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



It measures 260.3 × 86.3 mm and has 2 copper layers, 1.6 mm thick.
122 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ShrimpedKeyboard/Shrimptana repository on GitHub, at the commit this page was made from: the board is PCB/Shrimptana v1.kicad_pcb and its schematic PCB/Shrimptana v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ShrimpedKeyboard before reusing the design.