
Pollen PCB
pollen-project/data-collector-controller-PCB
Design files for the data collector made with KiCAD version 8.0.

I made this as Version 2 of my motor controller for my V8 Engine project, as that board failed to work entirely because of bad design.
Pwm motor controller is an open-source printed circuit board by ShaanJ1, from the ShaanJ1/DC-Motor-Speed-Controller repository on GitHub. It is a 2-layer board of 39 × 53.8 mm with 37 parts on 20 nets, routed with 123 tracks and 10 vias.
It is built around the MMBT2222A and SI2319CDS. Its parts include 11 resistors, 10 connectors, 5 diodes, 5 transistors and 2 capacitors. It belongs with the robots and motor control boards of this library.
A PWM speed controller made for the 775 DC Motor, but can be used with other motors as well. It features on/off buttons, an indicator LED, and a potentiometer to control the motor's speed
I made this as Version 2 of my motor controller for my V8 Engine project, as that board failed to work entirely because of bad design.
Total (CAD): $17.96
Total (USD): $12.57
Schematic
PCB
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Conn_01x01 | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | J2, J3, J4, J5, J6, J7, J8, J9, J10 |
| 5 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R5, R6, R8, R11 |
| 5 | 1K | Resistor_SMD:R_0603_1608Metric | R3, R4, R7, R9, R10 |
| 2 | D | Diode_SMD:Nexperia_CFP3_SOD-123W | D5, D6 |
| 2 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q3, Q6 |
| 1 | 0.01uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 100nF | SamacSys_Parts:GRMJN65C1H104JE01D | C1 |
| 1 | 4.7K | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | D | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | D3 |
| 1 | D_Zener | Diode_SMD:D_SOD-123 | D1 |
| 1 | Fuse | Fuse:Fuse_2920_7451Metric | F1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | LMC555xM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Motor_DC | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | M1 |
| 1 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1 |
| 1 | NMOS | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | NMOS | Package_TO_SOT_SMD:TO-263-2 | Q5 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | Si2319CDS | Package_TO_SOT_SMD:SOT-23 | Q4 |

pollen-project/data-collector-controller-PCB
Design files for the data collector made with KiCAD version 8.0.

BelaPlatform/gliss-hardware
You can find the source KiCad files for the Gliss module in this repository. This project is open hardware and under the Creative Commons Share Alike license 4.0.


justsem/RP2040-868
A GPRS/GNSS/BTLE and LiPo/Li-ion charger integrated Pi Pico on credit-card format.

g-rahul/BQ76PL455A-EVM-Clone
This respository contains low cost design files for BQ76PL455A-EVM Clone.



It measures 39 × 53.8 mm and has 2 copper layers, 1.6 mm thick.
37 parts, built around the MMBT2222A and SI2319CDS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ShaanJ1/DC-Motor-Speed-Controller repository on GitHub, at the commit this page was made from: the board is PCB/pwm-motor-controller.kicad_pcb and its schematic PCB/pwm-motor-controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ShaanJ1 before reusing the design.