

ESP32-S3 Weather Station
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 94
- Nets
- 86
- Pads
- 305
- Tracks, vias
- 0, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Feb 2024
- Updated
- 7 Mar 2024
Overview
ESP32-S3 Weather Station is an open-source printed circuit board by Scottydosntkn0w, from the Scottydosntkn0w/ESP32-PCB repository on GitHub. It is a 2-layer board with 94 parts on 86 nets.
It is built around the IR2104PBF, ADS1015IDGS and AMS1117-3.3, with the AMS1117-5.0, SS310LW and CSD19505KTT among its other parts. Its parts include 30 resistors, 29 capacitors, 14 diodes, 6 ICs and 4 transistors. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
Main components
10IR2104PBF
PDIP-8-40℃~+125℃ 100ns 10V~20V 130mA 150ns 150uA 2 270mA 50ns 680ns Enable shutdown、Interleaved conduction protection、Dead-time control Half-Bridge IGBT、MOSFET PDIP-8 Gate Drivers ROHSInfineon TechnologiesGate DriversADS1015IDGS
VSSOP-10-0.5mm-40℃~+125℃ 0.5LSB 12 128Hz、250Hz、490Hz、920Hz、1.6kHz、2.4kHz、3.3kHz 1MHz 2 2V~5.5V 2uA 3.3kHz 5ppm/℃ 6.144V Built-in Built-in I2C Sigma-Delta Support Yes VSSOP-10-0.5mm Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSS310LW
SOD-123W-55℃~+150℃ 1 Independent 100V 20uA@100V 3A 80A 850mV@3A SOD-123W Schottky Diodes ROHSTaiwan SemiconductorSchottky DiodesCSD19505KTT
TO-263-3-55℃~+175℃ 1 N-channel 2.08nF 212A 3.2V 3.8mΩ@6V 300W 34pF 7.92nF 76nC@10V 80V N-Channel TO-263-3 MOSFETs ROHSTexas InstrumentsMOSFETsLESD5D5.0CT1G
SOD-523-55℃~+150℃ 100W 12pF 16V 1uA 5V 7A 7V Bidirectional ESD IEC 61000-4-2 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKUncategorisedPTS810SJM250SMTRLFS
SMD-4P,4.2x3.2mm-40℃~+85℃ 1.6N 16V 2.5mm 3.2mm 4.2mm 50mA J-Lead Round Button SPST Surface Mount,Vertical SMD-4P,4.2x3.2mm Tactile Switches ROHSC&KTactile SwitchesSK6812
SMD-4P,5.4x5mm-40℃~+85℃ 0.6mA 1.6mm 120° 160mcd~320mcd 1kHz 2000V 280mcd~515mcd 3.7V~5.5V 460nm~470nm 520nm~530nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Built-in power-on reset circuit Semi-transparent lens SMD-4P,5.4x5mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)SI2306
SOT-23-55℃~+150℃ 1 N-channel 29pF 3.16A 305pF 30V 3V 4.5nC@5V 65mΩ@4.5V 65pF 750mW SOT-23 MOSFETs ROHSGuangdong HottechMOSFETs
README
README.mdESP32-PCB
Parts
94| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6, R9, R10, R11, R12, R18, R19, R30 |
| 5 | 0u1F | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C5, C6, C7, C10 |
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C16, C18, C19, C27 |
| 5 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C4, C9, C17 |
| 5 | SS310LW | Diode_SMD:D_SOD-123 | D8, D9, D10, D12, D13 |
| 4 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R17, R20, R21 |
| 4 | 15K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R22, R24, R26 |
| 4 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R23, R25, R28 |
| 3 | 100uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21, C25, C28 |
| 3 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C22, C23 |
| 3 | CSD19505 | Package_TO_SOT_THT:TO-220-3_Vertical | Q2, Q3, Q4 |
| 3 | LESD5D5.0CT1G | Diode_SMD:D_SOD-523 | D2, D3, D4 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R16 |
| 2 | 100uH | B82442T1104K050:INDM5650X530N | L2, L3 |
| 2 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D7, D14 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C13 |
| 2 | 33nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20, C24 |
| 2 | 35A | Fuse:Fuseholder_Keystone_3555-2 | F1, F2 |
| 2 | 470uF | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C26, C29 |
| 2 | 47K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27, R29 |
| 2 | 5K1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | IR2104 | IR2104SPBF:SOIC127P600X175-8N | U5, U7 |
| 2 | PTS810_SJM_250_SMTR_LFS | PTS815_SJG_250_SMTR_LFS:PTS815SJG250SMTRLFS | SW1, SW2 |
| 1 | 0-50V | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type703_RT10N02HGLU_1x02_P9.52mm_Horizontal | BT1 |
| 1 | 15V-80V | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type703_RT10N02HGLU_1x02_P9.52mm_Horizontal | SC1 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 3.3K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 47uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
| 1 | 60uH | Inductor_THT:L_Toroid_Vertical_L21.6mm_W11.4mm_P7.62mm_Pulse_KM-3 | L1 |
| 1 | 75 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | ADS1015IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | ESP32-S3-WROOM-2 | RF_Module:ESP32-S3-WROOM-2 | U2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D11 |
| 1 | PWERLED | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | SK6812 | LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D6 |
| 1 | Si2306 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | Thermistor_NTC | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | TH1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
More from Scottydosntkn0w/ESP32-PCB
3- 2 layers120.8 × 60 mm

- 2 layers120.8 × 60 mm

- 2 layers

Similar boards
- 2 layers139.7 × 88.9 mm

- 2 layers131 × 100 mm

- 2 layers53.8 × 38.9 mm

ESP 32 LM
Quisqueya-Len/Electiva-LM
Repositorio correspondiente a la materia Electiva Mecatrónica C3-2024 Luis Molina
27 partsMIT - 2 layers86 × 54 mm

- 2 layers112.7 × 121.4 mm

- 2 layers62.5 × 35 mm

- 2 layers52.8 × 69 mm

MuntsorteerderESP
TiebeDeclercq/Munt-sorteer--en-opslagsysteem
A coin-counting, storing, and dispensing system. View the blog »
53 parts - 2 layers80.5 × 40.8 mm

Saucey - Copy
Vulcan758/Saucey-Flight-Controller-PCB
This is a design repository for an ESP32 based flight controller I made
58 parts
Questions
What parts does the ESP32-S3 Weather Station use?
94 parts, built around the IR2104PBF, ADS1015IDGS, AMS1117-3.3 and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-S3 Weather Station KiCad files?
From the Scottydosntkn0w/ESP32-PCB repository on GitHub, at the commit this page was made from: the board is ESP32_Base_PCB/ESP32-S3 Weather Station/ESP32-S3 Weather Station.kicad_pcb and its schematic ESP32_Base_PCB/ESP32-S3 MPPT/ESP32-S3 MPPT/ESP32-S3 MPPT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-S3 Weather Station design in my own project?
Its repository states no licence, so its author keeps all rights: ask Scottydosntkn0w before reusing the design.