Skip to the content
2 layers131 × 100 mmMPPT 1KW ESP32 ggmV3, the printed circuit board in 3D

MPPT 1KW ESP32 ggmV3

g2maurer/MPPT1KW2

Solar Battery Charger

Size
131 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
104
Nets
63
Pads
296
Tracks, vias
586, 57
Pours
20
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
21 Mar 2023
Updated
24 Apr 2024

Overview

MPPT 1KW ESP32 ggmV3 is an open-source printed circuit board by g2maurer, from the g2maurer/MPPT1KW repository on GitHub. It is a 2-layer board of 131 × 100 mm with 104 parts on 63 nets, routed with 586 tracks and 57 vias.

It is built around the XL7015E1, IR2104PBF and AMS1117-5.0, with the SS310, CSD19505KTT and 100UF/35V among its other parts. Its parts include 38 resistors, 25 capacitors, 11 diodes, 9 ICs and 7 connectors. It belongs with the power boards and the ESP32 boards of this library.

Main components

7

README

README.md

MPPT1KW

Solar Battery Charger

  1. 4/18/2023 Added PCB files (KiCad).
  2. 10/11/2023 Updated BOM files: MPPT_1KW_ESP32_ggmV3.xlsx MPPT V3 BOM.pdf
  3. 04/23/2024 Added new enclosure design (new design was done with FreeCAD). The dimensions have not changed but the new design incorporates the fan and vent grills.

Parts

104
QtyValueFootprintReferences
1710kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4, R6, R12, R13, R14, R20, R25, R26, R27, R28, R29, R30, R31, R36, R37, R38 +1
10100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C3, C4, C11, C12, C13, C17, C20, C22, C23
7SS310Diode_SMD:D_2010_5025Metric_Pad1.52x2.65mm_HandSolderD1, D2, D3, D5, D6, D7, D9
447kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR16, R17, R32, R33
4MountingHoleMountingHole:MountingHole_2.7mmH1, H2, H3, H4
31kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5, R15, R34
34.7uFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC5, C6, C10
3CSD19505Package_TO_SOT_THT:TO-220-3_VerticalQ1, Q2, Q3
2100Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR9, R10
2100kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR8, R11
2100uF/35VCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC19, C21
2100uH/1AInductor_SMD:L_Taiyo-Yuden_NR-60xx_HandSolderingL2, L3
218kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR18, R21
21N4007Diode_SMD:D_2010_5025Metric_Pad1.52x2.65mm_HandSolderD4, D8
21uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC24, C25
22.2uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2, C9
23300Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR19, R23
233nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC16, C18
233uF/100VCapacitor_THT:CP_Radial_D8.0mm_P2.50mmC14, C15
235AESP32:Mini_BladeF1, F2
2470uFCapacitor_THT:CP_Radial_D16.0mm_P7.50mmC7, C8
2XL7015Package_TO_SOT_SMD:TO-252-5_TabPin3U4, U5
2XL7015_ModuleESP32:Module_XL7015U6, U9
10Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR39
110k ThermistorConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ3
12000Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR22
1200kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
13.3kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
15.1kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2
15600Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR24
15VConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ8
160uHInductor_THT:L_Toroid_Vertical_L41.9mm_W17.8mm_P12.70mm_Pulse_FL1
1ACS712xLCTR-30APackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU1
1ADS1015 ModuleConnector_JST:JST_XH_B10B-XH-A_1x10_P2.50mm_VerticalJ5
1AMS1117-5.0Package_TO_SOT_SMD:SOT-223-3_TabPin2U3
1B1212ESP32:B1212SU2
1Conn_01x02Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ4
1ESP-WROOM-32SESP32-Footprints:ESP-WROOM-32SU8
1IR2104Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU7
1InterfaceConnector_JST:JST_XH_B8B-XH-A_1x08_P2.50mm_VerticalJ2
1LED1LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD51
1LED2LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD52
1Si2306Package_TO_SOT_SMD:SOT-23Q4
1Si2306DSPackage_TO_SOT_SMD:SOT-23Q5
1Solar-BatteryESP32:Conn-Screw-4-termJ1
1TFTConnector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_VerticalJ6

Similar boards

  • 2 layers139.7 × 88.9 mmCharge Controller, the printed circuit board in 3D

    Charge Controller

    jharvey/Charge_Controller

    MPPT hardware which uses FUGU firmware

    163 parts24
  • 4 layers60 × 44 mmSTM32G431, the printed circuit board in 3D

    STM32G431

    Jana-Marie/OtterControlNG

    Next generation of OtterControl.

    156 parts9
  • 2 layers71.9 × 99.1 mmInverter, the printed circuit board in 3D

    Inverter

    Abi613/ESC

    3 phase motor bldc driver

    82 parts
  • 4 layers70.3 × 93.3 mm3-Phase BLDC (Brushless DC) Motor Controller., the printed circuit board in 3D

    3-Phase BLDC (Brushless DC) Motor Controller.

    Roshan-khatri78/Electronics-Projects-KiCad-

    A collection of my KiCad projects and PCB designs. These projects reflect my learning journey in electronics and PCB design.

    85 parts2
  • 4 layers140 × 90 mmTPA3255PBTL, the printed circuit board in 3D

    TPA3255PBTL

    EliMattingly22/TPA3255_ClassD_PBTL

    A KiCAD project for the TPA3255 amplifier in PBTL mode

    140 parts15MIT
  • 2 layers114.2 × 97.5 mmPlantMonitor v102, the printed circuit board in 3D

    PlantMonitor v102

    MathewNhari/KiCad

    Schematics for the plant monitoring systems

    51 parts
  • 2 layers30 × 30 mmBlewatch, the printed circuit board in 3D

    Blewatch

    jim-kirisame/LotWatch

    A BLE Watch using nrf51822

    27 parts22

Questions

How big is the MPPT 1KW ESP32 ggmV3 PCB?

It measures 131 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MPPT 1KW ESP32 ggmV3 use?

104 parts, built around the XL7015E1, IR2104PBF, AMS1117-5.0 and SS310. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MPPT 1KW ESP32 ggmV3 KiCad files?

From the g2maurer/MPPT1KW repository on GitHub, at the commit this page was made from: the board is PCB/MPPT_1KW_ESP32_ggmV3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the MPPT 1KW ESP32 ggmV3 design in my own project?

Its repository states no licence, so its author keeps all rights: ask g2maurer before reusing the design.