
OpenEFI rev4 bkp
Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI

Programmable battery discharger device intended for battery capacity measurements
Smarter discharger is an open-source printed circuit board by Sasszem, from the Sasszem/programmable-discharger repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 61 parts on 68 nets, routed with 277 tracks and 6 vias.
It is built around the LMV324, 74AHCT1G08SE and BSS138, with the HFD23/005-1ZP and IRLZ44N among its other parts. Its parts include 36 resistors, 6 connectors, 4 capacitors, 3 ICs and 3 diodes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 0R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33, R34, R35 +1 |
| 5 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R4, R5, R6, R11 |
| 4 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3, R14, R16 |
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4 |
| 4 | MountingHole_3.2mm | Arduino_MountingHole:MountingHole_3.2mm | MH1, MH2, MH3, MH4 |
| 3 | 1000 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R17, R18, R19 |
| 2 | 10 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12, R13 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9, R15 |
| 2 | 1N4148 | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2, D3 |
| 1 | 0R3 2W | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R8 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | 2k7 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | 74AHCT1G08 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U3 |
| 1 | Analog | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | HFD23/005-1ZP | Relay_THT:Relay_SPDT_Omron_G5V-1 | K1 |
| 1 | INA180B1 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | Jumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm_NumberLabels | JP1 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | LMV324 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | OLED DISPLAY | oled_display:Untitled | J5 |
| 1 | Power | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | RotaryEncoder_Switch_MP | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J6 |

Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI


sparkletron/mini_colecovision
A small (3.5" x 5.6") Colecovision Portable that uses composite output and +5v power supply.

SeanCline/atari8bitcart
Cartridge for 8-Bit Atari Computers (400/800/XL/XE)




AJain9199/AOS16
Table of Contents About The Project Pictures Technical Details Directory Structure To-Do Acknowledgments
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
61 parts, built around the LMV324, 74AHCT1G08SE, BSS138 and HFD23/005-1ZP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Sasszem/programmable-discharger repository on GitHub, at the commit this page was made from: the board is smarter-discharger/smarter-discharger/smarter-discharger.kicad_pcb and its schematic smarter-discharger/smarter-discharger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Sasszem before reusing the design.