
Right angle
sparkletron/mini_colecovision
A small (3.5" x 5.6") Colecovision Portable that uses composite output and +5v power supply.

A small (3.5" x 5.6") Colecovision Portable that uses composite output and +5v power supply.
Coleco original is an open-source printed circuit board by sparkletron, from the sparkletron/mini_colecovision repository on GitHub, published under the MIT licence. It is a 4-layer board of 88.7 × 143.4 mm with 110 parts on 149 nets, routed with 2,731 tracks and 84 vias.
It is built around the Z84C0010AEG, 74ABT125D and 27C256-17/J, with the TPA711D, 74AHCT1G08SE and SJ1-3525NG among its other parts. Its parts include 36 capacitors, 30 resistors, 16 ICs, 10 connectors and 4 switches. It belongs with the FPGA and CPLD boards of this library.

author: Jay Convertino
date: 2024.03.24
details: A Super Game Module Compatible Colecovision that is much smaller than the original, and only uses +5v.
license: MIT
This is a miniturization of the original colecovision. All logic is simplified to a single CPLD.
For detailed usage information, please navigate to one of the following sources. They are the same, just in a different format.
This design is made so anyone can build this. Though it will need a board from a PCB manufacture due to the small pitch and vias. There are only a few SMD devices, the CPU, a cap, and a few resistors. These are larger to help make soldering easier.
Recommend populating the SMD parts first, then moving on to the through hole parts from passive to active. If you do not plan on using a battery pack the shotkey diodes can be omitted.
This is a 4 layer board, power and ground planes are run on the two internal planes.
All case parts are ABS Plastic.



| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100nF | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C1, C7, C8, C10, C11, C12, C13, C14, C18, C19, C23, C25, C29, C36 |
| 8 | 100nF | Capacitor_SMD:C_1206_3216Metric | C9, C17, C22, C31, C32, C33, C34, C35 |
| 5 | 74AHCT1G08 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U12, U13, U14, U15, U16 |
| 5 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H4, H6, H7 |
| 4 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3, C5, C24, C30 |
| 4 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R14, R15, R16, R17 |
| 3 | 3K3 | Resistor_SMD:R_0805_2012Metric | R7, R8, R9 |
| 3 | 4.7uH | Inductor_THT:L_Axial_L7.0mm_D3.3mm_P10.16mm_Horizontal_Fastron_MICC | L1, L2, L3 |
| 3 | Conn_01x02 | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J2, J10, J11 |
| 2 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R27 |
| 2 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R28 |
| 2 | 10k | Resistor_THT:R_Array_SIP7 | RN1, RN2 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R18, R19 |
| 2 | 10nF | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C20, C21 |
| 2 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R24, R26 |
| 2 | 2R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R29, R30 |
| 2 | 2k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6 |
| 2 | 33pF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C15, C16 |
| 2 | TMS4416 | Package_DIP:DIP-18_W7.62mm | U7, U8 |
| 1 | 0.1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C27 |
| 1 | 0.47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C26 |
| 1 | 10.738635 MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 100R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12 |
| 1 | 100pF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C4 |
| 1 | 10K | RV100F-30:RV100F304K1B50K | RV1 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R23 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R20 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R21 |
| 1 | 2.2uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C28 |
| 1 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R22 |
| 1 | 270pF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C6 |
| 1 | 27C256 | Package_DIP:DIP-28_W15.24mm | U5 |
| 1 | 2N3904 | Package_TO_SOT_THT:TO-92_Wide | Q1 |
| 1 | 330uF | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C2 |
| 1 | 3k3 | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 470R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 4k7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 510R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | 68K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R25 |
| 1 | 74ABT125 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U10 |
| 1 | 75R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
| 1 | CY62256-55PC | Package_DIP:DIP-28_W15.24mm | U4 |
| 1 | Cartridge Port | TE_5530841-2:55308412_coleco | J4 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J6 |
| 1 | Conn_Coaxial | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J3 |
| 1 | EPM7128SLC | Package_LCC:PLCC-84_THT-Socket | U9 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | Player 1 | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J5 |
| 1 | Player 2 | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J7 |
| 1 | SJ1-3525NG | jacks2:SJ1-3525NG_CUD | J9 |
| 1 | SN76489AN | Package_DIP:DIP-16_W7.62mm | U2 |
| 1 | SW_Push | Button_Switch_THT:SW_Tactile_SKHH_Angled | SW1 |
| 1 | SW_SPDT | 1101M2S3ABE2:1101M2S3ABE2 | SW2 |
| 1 | SW_SPDT | Switches_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW3 |
| 1 | TMS9118NL | Package_DIP:DIP-40_W15.24mm | U6 |
| 1 | TPA711D | TPA:SOIC127P600X175-8N | U1 |
| 1 | YMZ284 | Package_DIP:DIP-16_W7.62mm | U11 |
| 1 | Z84C0010AEG | Package_QFP:LQFP-44_10x10mm_P0.8mm | U3 |
| 1 | sparkletron | logos:sparkletron | S1 |

sparkletron/mini_colecovision
A small (3.5" x 5.6") Colecovision Portable that uses composite output and +5v power supply.

sparkletron/mini_colecovision
A small (3.5" x 5.6") Colecovision Portable that uses composite output and +5v power supply.



/BAK/2%20-%20CPU%20and%20core%20components%20(Rev%203).kicad_pcb.jpg?size=s&soon)
FredericSegard/Fr80
Z80 Homebrew computer, code-named Fre80, pronounced Freddy.

next-hack/MG24_Doom_BLE
Doom ported to EFR32xG24 and MGM240x devices, with BLE multiplayer



It measures 88.7 × 143.4 mm and has 4 copper layers, 1.6 mm thick.
110 parts, built around the Z84C0010AEG, 74ABT125D, 27C256-17/J and TPA711D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sparkletron/mini_colecovision repository on GitHub, at the commit this page was made from: the board is schematic/coleco_original.kicad_pcb and its schematic schematic/coleco_original.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).