
Smarter discharger
Sasszem/programmable-discharger
Programmable battery discharger device intended for battery capacity measurements
HFExtended
-40℃~+70℃ 100mΩ 150mW 167Ω 2A 500mA@125VAC、1A@30VDC 5V 5ms 5ms 6 60V@DC、125V@AC A set of conversions: 1C (Single-pole Double-throw Conversion) AgNi + Gold plated DIP,12.5x7.5mm Signal Relays ROHS
The HFD23/005-1ZP is a power Relay made by HF in a DIP,12.5x7.5mm package with 6 pins. -40℃~+70℃ 100mΩ 150mW 167Ω 2A 500mA@125VAC、1A@30VDC 5V 5ms 5ms 6 60V@DC、125V@AC A set of conversions: 1C (Single-pole Double-throw Conversion) AgNi + Gold plated DIP,12.5x7.5mm Signal Relays ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:HFD23_005-1ZP, from EasyEDA) and its footprint (EasyEDA_Cloud:RELAY-TH_HF_HFD23-0XX-1ZX, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C2902775). 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | 1 | Unspecified |
| 2 | 2 | Unspecified |
| 3 | 3 | Unspecified |
| 4 | 4 | Unspecified |
| 5 | 5 | Unspecified |
| 6 | 6 | Unspecified |

Sasszem/programmable-discharger
Programmable battery discharger device intended for battery capacity measurements
Yes. The symbol is EasyEDA_Cloud:HFD23_005-1ZP and the footprint EasyEDA_Cloud:RELAY-TH_HF_HFD23-0XX-1ZX, both drawn on this page. PCBKit places them on a board for you when you design with it.
DIP,12.5x7.5mm, with 6 pins. Its footprint is drawn on this page.
HF publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C2902775, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the HFD23/009-1ZS by HF. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.