
ESP32CAM Weather Station
EliaKr/ESP32CAM-Weather-Station
[WIP] This repo includes electronics (schematics/PCBs), 3D-printable mechanical parts, and software for a custom ESP32-CAM weather station.

Sensorstick is an open-source printed circuit board by SamanHushi, from the SamanHushi/sensorstick_minimal repository on GitHub. It is a 4-layer board of 39.2 × 28.4 mm with 25 parts on 21 nets, routed with 247 tracks and 91 vias.
It is built around the SGP41-D-R4, VEML7700-TT and D5V0L1B2WS-7. Its parts include 10 capacitors, 4 ICs, 3 resistors, 2 diodes and 1 connector. It belongs with the ESP32 and RISC-V boards of this library.
[!NOTE] This board has not been physically tested.
Interactive BOM: https://samanhushi.github.io/sensorstick_minimal/
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C5, C7, C9 |
| 4 | 2x 10k Array | easyeda2kicad:RES-ARRAY-SMD_0402-4P-L1.0-W1.0-BL | RN1, RN2, RN3, RN4 |
| 2 | 10μF | Capacitor_SMD:C_0603_1608Metric | C8, C10 |
| 2 | 1μF | Capacitor_SMD:C_0603_1608Metric | C2, C6 |
| 1 | 10Ω | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 33kΩ | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 33kΩ NTC | Resistor_SMD:R_0603_1608Metric | TH1 |
| 1 | 4.7 Ω | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | D5V0L1B2WS-7 | easyeda2kicad:SOD-323_L1.8-W1.3-LS2.5-BI | D1 |
| 1 | ESP32-C3_SUPERMINI | CustomLibrary:ESP32-C3_SUPERMINI_SMD | U1 |
| 1 | SCD40 | Sensor:Sensirion_SCD4x-1EP_10.1x10.1mm_P1.25mm_EP4.8x4.8mm | U4 |
| 1 | SGP41-D-R4 | SGP41_D_R4:XDCR_SGP41-D-R4 | U7 |
| 1 | USB-A Header | CustomLibrary:USB-A-SMD_U217-041N-4BV81 | J1 |
| 1 | VEML7700 | easyeda2kicad:LED-SMD_4P-L6.8-W2.4_VEML7700-TR | LED1 |
| 1 | WSEN-HIDS | Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U3 |

EliaKr/ESP32CAM-Weather-Station
[WIP] This repo includes electronics (schematics/PCBs), 3D-printable mechanical parts, and software for a custom ESP32-CAM weather station.

Eniemooo/Sensor-HAT
Open-hardware indoor air sensor (CO2, VOC/NOx, T/RH, light, sound): HAT for Raspberry Pi or standalone with Seeed XIAO + ESPHome. KiCad 10.


ECE49022Team22/delivery-robot-pcb
Delivery robot KiCad PCB project and reusable 3.3 V LDO module


SK-Electronics-Consulting/electronics-widgets
Small, Custom Tools for Electronics

emertcakir/OpenAirScope
Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.

pushtiujeniya/esp32-c6-environmental-logger
This repository contains an Environmental Sensor Station and Data Logger powered by the ESP32-C6-WROOM-1 microcontroller.
It measures 39.2 × 28.4 mm and has 4 copper layers, 1.6 mm thick.
25 parts, built around the SGP41-D-R4, VEML7700-TT and D5V0L1B2WS-7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SamanHushi/sensorstick_minimal repository on GitHub, at the commit this page was made from: the board is sensorstick/sensorstick.kicad_pcb and its schematic sensorstick/sensorstick.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SamanHushi before reusing the design.