
Adafruit LIS3MDL + LSM6DSOX
SamRBetts/Project-Crumple-Zone
Welcome to all version-controlled CAD for the ME capstone CanSat project!

Welcome to all version-controlled CAD for the ME capstone CanSat project!
MainPCB is an open-source printed circuit board by SamRBetts, from the SamRBetts/Project-Crumple-Zone repository on GitHub. It is a 2-layer board with 27 parts on 75 nets, routed with 196 tracks and 4 vias.
It is built around the XB24CDMPIT-001, AP63205WU and DEV-16771. Its parts include 4 capacitors, 3 resistors, 1 IC, 1 diode and 1 transistor.
Welcome to all version-controlled CAD for the ME capstone CanSat project!
Guidelines:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 22 uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | Power1, Solenoid1 |
| 2 | Conn_01x04_Socket | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | GPS6MV2, SEN291 |
| 2 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | ASPD-4525, LSM6DSOX+LIS3MDL1 |
| 1 | 1 kO | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 1 | 10 uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 100 kO | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 1 | 100 nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2 |
| 1 | 2.1 kO | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 4.7 uH | Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder | L1 |
| 1 | AP63205WU | Package_TO_SOT_SMD:TSOT-23-6 | U1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | Buzzer1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Servo1 |
| 1 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | BMP390 |
| 1 | DEV-16771 | DEV-16771:MODULE_DEV-16771 | TEENSY1 |
| 1 | LED | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | D1 |
| 1 | NMOS | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | SW_DIP_x01 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | SW1 |
| 1 | XB24CDMPIT-001 | XB24CDMPIT-001:DIP-20 | XBEE1 |
The 23 most common of 27 parts.

SamRBetts/Project-Crumple-Zone
Welcome to all version-controlled CAD for the ME capstone CanSat project!

cacost12/SDR-Ground-Station-Telemetry-PCB
Current PCB Revision: 1.0 PCB Part Number: A0005



doludiran/Home-Energy-Management-System-
This system retrieves dynamic electricity pricing information from a utility portal and automatically schedules large residential loads like EV charging to reduce the overall cost of energy consumed

punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark


Aecert-Robotics/Hexapod
A hexapod powered by Arduino using hobby servos

27 parts, built around the XB24CDMPIT-001, AP63205WU and DEV-16771. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SamRBetts/Project-Crumple-Zone repository on GitHub, at the commit this page was made from: the board is PCB/MainPCB/MainPCB.kicad_pcb and its schematic PCB/MainPCB/MainPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SamRBetts before reusing the design.