2 layers
MainPCB
SamRBetts/Project-Crumple-Zone
Welcome to all version-controlled CAD for the ME capstone CanSat project!
27 parts
2 layers25.4 × 17.8 mm
Adafruit LIS3MDL + LSM6DSOX
SamRBetts/Project-Crumple-ZoneWelcome to all version-controlled CAD for the ME capstone CanSat project!
- Size
- 25.4 × 17.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 15
- Pads
- 98
- Tracks, vias
- 243, 25
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 29 Sep 2023
- Updated
- 8 May 2024
Overview
Adafruit LIS3MDL + LSM6DSOX is an open-source printed circuit board by SamRBetts, from the SamRBetts/Project-Crumple-Zone repository on GitHub. It is a 2-layer board of 25.4 × 17.8 mm with 28 parts on 15 nets, routed with 243 tracks and 25 vias.
It is built around the LIS3MDL, AP2112K-3.3 and BSS138, with the LSM6DSOX among its other parts. Its parts include 5 capacitors, 2 resistors, 2 ICs, 1 diode and 1 transistor.
Main components
4
LIS3MDL
LGA-12(2x2)-40℃~+85℃ 1.9V~3.6V 16bit 1uA、40uA、270uA I2C、SPI ±1.6mT、±1.2mT、±8Gs、±4Gs ±1.6mT、±1.2mT、±8Gs、±4Gs LGA-12(2x2) 3D Magnetic Sensors ROHSSTMicroelectronics3D Magnetic Sensors
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
LSM6DSOX
LGA-146-Axis IMU (Inertial Measurement Unit) with Embedded AI: Always-On 3-Axis Accelerometer and 3-Axis GyroscopeSTMicroelectronicsAccelerometers
README
README.mdProject-Crumble-Zone
Welcome to all version-controlled CAD for the ME capstone CanSat project!
Guidelines:
- Every assembly lives in a similarly-named folder containing itself + everything needed to construct it; this may include more assembly folders
- Anything that is made from a single piece of material or single off-the-shelf component is a SLDPRT, anything else is a SLDASM
- If you need a stock part, copy it or add it to the Github stock parts repo
- Make subassemblies when a set of parts logically functions together; at minimum, anything that is glued together should be its own assembly, and anything that will be handled as a unit should be its own assembly (ex: the avbay should be one assembly)
- File names should be snake case (like_this), folder names should be upper camel case (LikeThis)
- Shared interface parts like couplers and screws should belong to the assembly that they are permanently attached to first; if it’s not obvious which side they should belong to, they should belong to the overarching assembly
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MOUNTINGHOLE2.5 | Adafruit LIS3MDL + LSM6DSOX:MOUNTINGHOLE_2.5_PLATED | U$1, U$17, U$19, U$21 |
| 2 | Adafruit LIS3MDL + LSM6DSOX:SOLDERJUMPER_ARROW_NOPASTE | SJ1, SJ2 | |
| 2 | Adafruit LIS3MDL + LSM6DSOX:STEMMAQT | U$30, U$31 | |
| 2 | 0.1uF | Adafruit LIS3MDL + LSM6DSOX:0603-NO | C1, C4 |
| 2 | 10K | Adafruit LIS3MDL + LSM6DSOX:RESPACK_4X0603 | R1, R3 |
| 2 | 10uF | Adafruit LIS3MDL + LSM6DSOX:0805-NO | C2, C3 |
| 2 | FIDUCIAL_1MM | Adafruit LIS3MDL + LSM6DSOX:FIDUCIAL_1MM | FID3, FID4 |
| 2 | STEMMA_I2C_QT | Adafruit LIS3MDL + LSM6DSOX:JST_SH4 | CONN3, CONN4 |
| 1 | Adafruit LIS3MDL + LSM6DSOX:1X06_ROUND_70 | JP4 | |
| 1 | Adafruit LIS3MDL + LSM6DSOX:1X05_ROUND_70 | JP1 | |
| 1 | Adafruit LIS3MDL + LSM6DSOX:PCBFEAT-REV-040 | U$25 | |
| 1 | Adafruit LIS3MDL + LSM6DSOX:ADAFRUIT_2.5MM | U$20 | |
| 1 | 1uF | Adafruit LIS3MDL + LSM6DSOX:0603-NO | C5 |
| 1 | AP2112K-3.3 | Adafruit LIS3MDL + LSM6DSOX:SOT23-5 | U2 |
| 1 | BSS138 | Adafruit LIS3MDL + LSM6DSOX:SOT363 | Q2 |
| 1 | GREEN | Adafruit LIS3MDL + LSM6DSOX:CHIPLED_0603_NOOUTLINE | D1 |
| 1 | LIS3MDL | Adafruit LIS3MDL + LSM6DSOX:LGA12_2X2MM | IC1 |
| 1 | LSM6DSOX | Adafruit LIS3MDL + LSM6DSOX:LGA-14L | U$35 |
More from SamRBetts/Project-Crumple-Zone
1Similar boards
- 2 layers25.4 × 17.8 mm
- 4 layers20 × 20 mm
- 4 layers35 × 30.4 mm
Siplab wristband
bastocon/sparse-pose-benchmark
Bachelor Thesis Paper: Sparse Pose Estimation data collection, evaluation backend, frontend, as well as all resources for the creation of the Hidden Dataset using commodity sensors.
67 partsMIT - 2 layers50.8 × 22.9 mm
Adafruit adafruit lsm6dsox lis3mdl pcb adafruit lis3mdl lsm6dsox featherwing
oomlout/oomlout_oomp_project_bot_v_2
28 parts - 4 layers41 × 41 mm
- 2 layers50 × 80 mm
- 4 layers65 × 56 mm
Canary hat
danbrunski/canary
Four 25 F cells in series for CANary-PWR's LTC3350 hold-up, on a lead (design record: docs/CANary-PWR-Spec.md §P4). The board has no active parts: four cells, an NTC, two Kelvin net ties and a Micro-Fit 2 × 5 header.
66 parts - 4 layers64 × 60 mm
Dronemagnav
ajisrawi/dronemagnav
Magnetic-anomaly navigation (MagNav) board + firmware for drones: ESP32-S3, BMI088, LIS3MDL, BMP280, u-blox GNSS, WDMAM map matching, particle filter, MAVLink, phone route planner. Proprietary - all rights reserved.
60 parts11
Questions
How big is the Adafruit LIS3MDL + LSM6DSOX PCB?
It measures 25.4 × 17.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Adafruit LIS3MDL + LSM6DSOX use?
28 parts, built around the LIS3MDL, AP2112K-3.3, BSS138 and LSM6DSOX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Adafruit LIS3MDL + LSM6DSOX KiCad files?
From the SamRBetts/Project-Crumple-Zone repository on GitHub, at the commit this page was made from: the board is PCB/Other Boards/LSM6DSOX+LIS3MDL/Adafruit LIS3MDL + LSM6DSOX.kicad_pcb and its schematic PCB/MainPCB/MainPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Adafruit LIS3MDL + LSM6DSOX design in my own project?
Its repository states no licence, so its author keeps all rights: ask SamRBetts before reusing the design.