2 layers50.8 × 28.6 mm
Beaglebone obd
KoffeinFlummi/rustbucket
Access your car's diagnostics with a BeagleBone Blue and Rust.
20 parts60GPL-3.0
2 layers27.9 × 43.2 mm
Lowering platform
SaddlebackCollegeRobotics/lowering_platform_pcbMOSFET driver pcb for brush motor and UV light used in the lowering platform of the Science Mission
- Size
- 27.9 × 43.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 7
- Pads
- 21
- Tracks, vias
- 43, 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 May 2022
- Updated
- 29 May 2022
Overview
Lowering platform is an open-source printed circuit board by SaddlebackCollegeRobotics, from the SaddlebackCollegeRobotics/lowering_platform_pcb repository on GitHub. It is a 2-layer board of 27.9 × 43.2 mm with 9 parts on 7 nets, routed with 43 tracks and 1 via.
It is built around the IRLB8721PBF. Its parts include 4 connectors, 2 resistors and 2 transistors.
Main components
1Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | IRLB8721PBF | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1, J4 |
| 1 | Conn_01x03_Female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J2 |
| 1 | LOGO | alexisawesome:SCRoboticsLogo | G*** |
| 1 | Screw_Terminal_01x04 | alexisawesome:TerminalBlock_bornier-4_P5.08mm | J3 |
Similar boards
- 2 layers99.1 × 99.1 mm
- 2 layers36 × 31 mm
ESPDimmer
stelioskat/esp8266-led-dimmer
Wifi enabled LED strip dimmer that is controlled using MQTT messages.
11 parts20MIT - 2 layers70.3 × 30.2 mm
- 4 layers104.2 × 77.7 mm
- 4 layers69.9 × 44.5 mm
DoughLee2
chl33/Dough133
A temperature-controlled container for proofing and fermenting soughdough
62 parts3MIT - 2 layers61 × 78.7 mm
- 2 layers33.8 × 49.5 mm
EspAtomizerpcbv3rev1
Adamibus/ESPAtomizer-iOS
This is a minimal KiCad 6/7 project skeleton. Open ESPAtomizer.kicadpro in KiCad.
21 parts1
Questions
How big is the Lowering platform PCB?
It measures 27.9 × 43.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lowering platform use?
9 parts, built around the IRLB8721PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lowering platform KiCad files?
From the SaddlebackCollegeRobotics/lowering_platform_pcb repository on GitHub, at the commit this page was made from: the board is lowering platform.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lowering platform design in my own project?
Its repository states no licence, so its author keeps all rights: ask SaddlebackCollegeRobotics before reusing the design.