2 layers50.8 × 28.6 mm
Beaglebone obd
KoffeinFlummi/rustbucket
Access your car's diagnostics with a BeagleBone Blue and Rust.
20 parts60GPL-3.0
2 layers80 × 69.9 mm
Science cake mosfets 2
SaddlebackCollegeRobotics/funnel_cake_pcbMOSFET driver pcb with Raspberry Pi Pico controller and debugger for the funnel cake of the Science Mission
- Size
- 80 × 69.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 82
- Pads
- 132
- Tracks, vias
- 133, 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 May 2022
- Updated
- 29 May 2022
Overview
Science cake mosfets 2 is an open-source printed circuit board by SaddlebackCollegeRobotics, from the SaddlebackCollegeRobotics/funnel_cake_pcb repository on GitHub. It is a 2-layer board of 80 × 69.9 mm with 24 parts on 82 nets, routed with 133 tracks and 4 vias.
It is built around the IRLB8721PBF. Its parts include 8 connectors, 7 resistors, 7 transistors and 1 diode.
Main components
1Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7 |
| 7 | IRLB8721PBF | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6, Q7 |
| 4 | Conn_01x20 | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J1, J2, J3, J5 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J4 |
| 1 | LOGO | alexisawesome:SCRoboticsLogo | G*** |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J6 |
| 1 | Screw_Terminal_01x04 | alexisawesome:TerminalBlock_bornier-4_P5.08mm | J8 |
| 1 | Screw_Terminal_01x06 | alexisawesome:TerminalBlock_bornier-6_P5.08mm | J7 |
Similar boards
- 2 layers99.1 × 99.1 mm
- 2 layers36 × 31 mm
ESPDimmer
stelioskat/esp8266-led-dimmer
Wifi enabled LED strip dimmer that is controlled using MQTT messages.
11 parts20MIT - 2 layers70.3 × 30.2 mm
- 4 layers104.2 × 77.7 mm
- 4 layers69.9 × 44.5 mm
DoughLee2
chl33/Dough133
A temperature-controlled container for proofing and fermenting soughdough
62 parts3MIT - 2 layers61 × 78.7 mm
- 2 layers33.8 × 49.5 mm
EspAtomizerpcbv3rev1
Adamibus/ESPAtomizer-iOS
This is a minimal KiCad 6/7 project skeleton. Open ESPAtomizer.kicadpro in KiCad.
21 parts1
Questions
How big is the Science cake mosfets 2 PCB?
It measures 80 × 69.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Science cake mosfets 2 use?
24 parts, built around the IRLB8721PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Science cake mosfets 2 KiCad files?
From the SaddlebackCollegeRobotics/funnel_cake_pcb repository on GitHub, at the commit this page was made from: the board is science_cake_mosfets_2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Science cake mosfets 2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask SaddlebackCollegeRobotics before reusing the design.